collapse

Advertisement


Author Topic: Tractor PTO Post Hole Digger storage solution  (Read 2839 times)

Offline Rob

  • Non-Hunting Topics
  • Trade Count: (+3)
  • Frontiersman
  • *****
  • Join Date: Apr 2009
  • Posts: 4859
  • Location: Sandpoint ID
Tractor PTO Post Hole Digger storage solution
« on: September 23, 2024, 01:33:07 PM »
Built a storage system for the Post Hole digger based on something I saw on TractorByNet.  Attaching this beast has been one of my least favorite things to do with my tractor - to the point that I would almost rather dig the holes by hand! Someone described attaching a PHD as trying to manhandle a 300 pound mousetrap and I agree. I was able to attach it to the tractor in 10 min or so with this system - this was a 30-40 min task for me in the past.

I added two posts to the cross members of my implement shed and then ran a beam from post to post. The beam is held in place with some 2x6 "ears" and a pair of 10 inch nails in oversized holes that pin the beam in place - this allows me to quickly remove the beam when I attach the PHD, and slide it back in when I stow it after use. (The beam looks like it is part of the rafters in the photo, but it is significantly lower.) All I do is back in, attach the side links, remove the top link and attach the PHD & PTO, lift the 3 point up, slide the beam out and go. Now it is both under cover and easier to hook up. The orange rachet straps keep it stable when stored and balancing on the beam. I store half the PTO shaft in the garage to keep it in good shape.
_______________________________________
Sit tall in the saddle, hold you head up high.
Keep your eyes fixed on where the trail meets the sky.
Live like you ain’t afraid to die.
Just sit back and enjoy your ride
  - Chris Ledoux

Offline andersonjk4

  • Non-Hunting Topics
  • Trade Count: (+4)
  • Sourdough
  • *****
  • Join Date: Jul 2010
  • Posts: 1295
  • Location: Spangle, WA
Re: Tractor PTO Post Hole Digger storage solution
« Reply #1 on: September 23, 2024, 02:07:11 PM »
Great idea! I have been wanting to find a better way to store my PHD.  I agree they are a giant pain to get on and off.  Thanks for sharing.  Now I just need to decide where to build it. 

Offline Rob

  • Non-Hunting Topics
  • Trade Count: (+3)
  • Frontiersman
  • *****
  • Join Date: Apr 2009
  • Posts: 4859
  • Location: Sandpoint ID
Re: Tractor PTO Post Hole Digger storage solution
« Reply #2 on: September 23, 2024, 04:25:26 PM »
I thought it was pretty clever.

Here is the link for the original idea.  There were some other ideas presented too.  Good luck!

https://www.tractorbynet.com/forums/threads/how-to-make-and-use-a-phd-goal-post-rack.473564/
_______________________________________
Sit tall in the saddle, hold you head up high.
Keep your eyes fixed on where the trail meets the sky.
Live like you ain’t afraid to die.
Just sit back and enjoy your ride
  - Chris Ledoux

Offline wadu1

  • Grumpy
  • Global Moderator
  • Trade Count: (+30)
  • Old Salt
  • *****
  • Join Date: Sep 2008
  • Posts: 7273
  • Location: Tacoma
  • RMEF, DU, NRA, PFE, NWTF
Re: Tractor PTO Post Hole Digger storage solution
« Reply #3 on: September 23, 2024, 05:29:15 PM »
Well, I learned a lot I thought PHD meant you had a doctorate in something or like Push Hear Dummy.  :chuckle: Sorry, looks like it works great.
"a fronte praecipitium a tergo lupi"

Offline deereman

  • Non-Hunting Topics
  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Jan 2010
  • Posts: 116
  • Location: Basin
Re: Tractor PTO Post Hole Digger storage solution
« Reply #4 on: September 23, 2024, 06:16:17 PM »
I usually just left mine parked drilled in the dirt. Rust is not an issue in the dry side.

Offline hollymaster

  • Non-Hunting Topics
  • Trade Count: (+2)
  • Sourdough
  • *****
  • Join Date: Nov 2012
  • Posts: 1122
  • Location: Enumclaw
Re: Tractor PTO Post Hole Digger storage solution
« Reply #5 on: September 23, 2024, 08:11:18 PM »
I tie mine up to a tree branch

Offline Happy Gilmore

  • Business Sponsor
  • Trade Count: (+1)
  • Old Salt
  • *****
  • Join Date: Jul 2008
  • Posts: 5135
  • Location: Ronan, MT
Re: Tractor PTO Post Hole Digger storage solution
« Reply #6 on: September 24, 2024, 09:16:51 PM »
I just drill it in the ground and leave it. That's a lot of covered spaced but, it should keep it purty
"Far better it is to dare mighty things, to win glorious triumphs, even though checked by failure, than to take rank with those poor spirits who neither enjoy much nor suffer much, because they live in the grey twilight that knows not victory nor defeat."
Theodore Roosevelt 1899

Offline Rob

  • Non-Hunting Topics
  • Trade Count: (+3)
  • Frontiersman
  • *****
  • Join Date: Apr 2009
  • Posts: 4859
  • Location: Sandpoint ID
Re: Tractor PTO Post Hole Digger storage solution
« Reply #7 on: September 25, 2024, 05:50:26 AM »
One does not have to cover it - the same system can be built with two posts and a horizontal beam out in the open.  Infact that is what I modeled mine after.

I built the shed to cover my implements so I am not worried about the use of space. 
_______________________________________
Sit tall in the saddle, hold you head up high.
Keep your eyes fixed on where the trail meets the sky.
Live like you ain’t afraid to die.
Just sit back and enjoy your ride
  - Chris Ledoux

 


* Advertisement

* Recent Topics

Looking for Solid 22 LR input by Rat44
[Today at 12:26:36 AM]


Lynx kittens confirmed in the Kettle Range by dwils233
[Today at 12:04:14 AM]


Archery elk gear, 2025. by spin05
[Today at 12:03:42 AM]


How To Get Your $0.00 Tax Stamp - Black Hammer Arms by dreadi
[Yesterday at 11:33:25 PM]


AUCTION: SE Idaho DIY Deer or Deer/Elk Hunt by Rainier10
[Yesterday at 10:19:01 PM]


Seeking recommendations on a new scope by Klickitatsteelie
[Yesterday at 09:23:56 PM]


2025 Canning by Twispriver
[Yesterday at 09:15:12 PM]


2025 Montana alternate list by Edminsterquality
[Yesterday at 08:47:06 PM]


WSTA 2025 Summer Rendezvous Agenda by Trapper John
[Yesterday at 08:00:27 PM]


First attempt at polish sausages by Stein
[Yesterday at 07:58:22 PM]


Fullsized Truck Opinion: HiMiNew vs LoMiOlder by MADMAX
[Yesterday at 07:57:22 PM]


Sockeye Numbers by Southpole
[Yesterday at 07:44:30 PM]


Best all around muzzy (updated) by jjhunter
[Yesterday at 07:44:26 PM]


38% increase in fishing and hunting licenses by Sitka_Blacktail
[Yesterday at 07:02:41 PM]


50 inch SXS and Tracks? by 92xj
[Yesterday at 05:34:03 PM]


3 days for Kings by MADMAX
[Yesterday at 05:06:49 PM]


Full moon and last week of September by pd
[Yesterday at 04:51:23 PM]


Hunting bears in the thick stuff by ghosthunter
[Yesterday at 04:33:46 PM]


GMU 247 Entiat bear hunting by Ridgerunner
[Yesterday at 11:56:01 AM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal