collapse

Advertisement


Author Topic: Pillar and Glass Bedding - Ruger American in a Boyds  (Read 1631 times)

Offline KP-Skagit

  • Trade Count: (+1)
  • Longhunter
  • *****
  • Join Date: Dec 2015
  • Posts: 532
  • Location: Skagit Valley
Pillar and Glass Bedding - Ruger American in a Boyds
« on: December 19, 2024, 01:10:26 PM »
I have a Ruger American Rifle I put a Boyds laminate stock on years ago. Recently it was shooting like absolute garbage so I tossed the factory stock back on and its back to MOA.

I prefer the Boyds but clearly it's the source of the problem. As I understand it now Boyds provides some bedding with their stocks for bedding the v block lugs into the stock. Back in the day with mine they did not. Boyds also has an option now to have pillars installed but back in the day they did not.

My question is, is it worth doing the glass bedding without pillars in the stock? There has been some compression of the stock over the years where the bolts for the action stick.

And more generally, if anyone has messed around with a Ruger American like this I am curious. Even working on the factory stock.

Offline b23

  • Non-Hunting Topics
  • Trade Count: (+7)
  • Frontiersman
  • *****
  • Join Date: Jan 2010
  • Posts: 3309
  • Location: Spokane Wa.
Re: Pillar and Glass Bedding - Ruger American in a Boyds
« Reply #1 on: December 19, 2024, 01:37:58 PM »
Except for stocks that have bedding blocks I have pillars put in everything and I think it's especially important to have them in wood stocks.

Offline MeepDog

  • Trade Count: (+5)
  • Longhunter
  • *****
  • Join Date: Jul 2021
  • Posts: 712
  • Location: SE Washington
Re: Pillar and Glass Bedding - Ruger American in a Boyds
« Reply #2 on: December 19, 2024, 03:42:34 PM »
One of the best things you can do to a ruger american is take the stock off and get a dowel wrapped in sandpaper. Run it along where the barrel sits and keep doing it until the barrel floats all the way down. Those factory stocks are often warped and if it's touching the barrel it could open your groups up. Sounds like your factory stock is working well though.

Offline addicted1

  • Non-Hunting Topics
  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Oct 2015
  • Posts: 485
  • Location: NW
Re: Pillar and Glass Bedding - Ruger American in a Boyds
« Reply #3 on: December 19, 2024, 07:27:47 PM »
 :yeah:
Not a Ruger, but I a Boyd’s on one of my guns. Glass bed and pillars, shot okay but not great. Had to sand the the barrel channel on the stock. Run a piece of paper between the barrel and see if it snags up anywhere. That cured my issues.

Offline HillHound

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Apr 2019
  • Posts: 1632
  • Location: Central Washington
  • Groups: NRA, RMEF
Re: Pillar and Glass Bedding - Ruger American in a Boyds
« Reply #4 on: January 07, 2025, 08:06:01 AM »
.

Offline KP-Skagit

  • Trade Count: (+1)
  • Longhunter
  • *****
  • Join Date: Dec 2015
  • Posts: 532
  • Location: Skagit Valley
Re: Pillar and Glass Bedding - Ruger American in a Boyds
« Reply #5 on: January 07, 2025, 08:39:38 AM »
Thanks for the input all. I think I have convinced myself that I will stick with the factory stock and go from there. Don't need another project to mess around with.

Offline jrebel

  • Non-Hunting Topics
  • Trade Count: (+24)
  • Explorer
  • ******
  • Join Date: Feb 2008
  • Posts: 11334
  • Location: East Wenatchee
Re: Pillar and Glass Bedding - Ruger American in a Boyds
« Reply #6 on: January 07, 2025, 08:57:03 AM »
There are other aftermarket stocks.  The Boyds is usually the economical fix to aftermarket, but if you want to spend a little more and have a nice plug and play....look at other manufacturers.  The WOOX is one that comes to mind. 

Ruger Americans are inexpensive rifles though.....so keeping them in the factory stock and not giving a crap if you beat it up is the way to go in my opinion.  Before I spent $600 to 1K on a new stock, I would buy another rifle.  My one ruger american shoots very well in the factory stock and will live in it for that reason.  It's my truck gun for yotes. 

Offline KP-Skagit

  • Trade Count: (+1)
  • Longhunter
  • *****
  • Join Date: Dec 2015
  • Posts: 532
  • Location: Skagit Valley
Re: Pillar and Glass Bedding - Ruger American in a Boyds
« Reply #7 on: January 07, 2025, 10:10:49 AM »
There are other aftermarket stocks.  The Boyds is usually the economical fix to aftermarket, but if you want to spend a little more and have a nice plug and play....look at other manufacturers.  The WOOX is one that comes to mind. 

Ruger Americans are inexpensive rifles though.....so keeping them in the factory stock and not giving a crap if you beat it up is the way to go in my opinion.  Before I spent $600 to 1K on a new stock, I would buy another rifle.  My one ruger american shoots very well in the factory stock and will live in it for that reason.  It's my truck gun for yotes.

That's pretty much where I am at I think... Toss in I won it with 40 dollars of raffle tickets.

Offline chukarchaser

  • Non-Hunting Topics
  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Jan 2008
  • Posts: 450
Re: Pillar and Glass Bedding - Ruger American in a Boyds
« Reply #8 on: January 12, 2025, 05:16:25 PM »
I would float then bed the action without the pillars.  My  :twocents: says its worth it and not much of a project to do.

 


* Advertisement

* Recent Topics

Sportsman Alliance files petition to Gov Ferguson for removal of corrupt WA Wildlife Commissioners by addicted1
[Yesterday at 10:11:08 PM]


Upland Side by Side by TitusFord
[Yesterday at 08:54:19 PM]


Public Land Sale Senate Budget Reconciliation by JDArms1240
[Yesterday at 08:45:13 PM]


North Peninsula Salmon Fishing by metlhead
[Yesterday at 07:43:57 PM]


2025 Quality Chewuch Tag by MADMAX
[Yesterday at 07:08:53 PM]


3 days for Kings by Stein
[Yesterday at 06:45:11 PM]


Kinda fun LH rimfire rifle project by JDHasty
[Yesterday at 06:44:33 PM]


Can’t fish for pinks area 8-2? by WAcoueshunter
[Yesterday at 05:22:46 PM]


GMU 247 Entiat bear hunting by GeoSwan
[Yesterday at 03:02:21 PM]


Evergreen youth livestock show and sale by HUNTIN4SIX
[Yesterday at 02:24:03 PM]


2025 NWTF Jakes Day by wadu1
[Yesterday at 02:19:48 PM]


Dandy Bull by Buckhunter24
[Yesterday at 01:29:37 PM]


Tricer AD tripod by gee_unit360
[Yesterday at 12:40:45 PM]


How a Product That Changed Hunting FOREVER was invented in the 1980's by jrebel
[Yesterday at 11:28:44 AM]


Ten Years, and still plugging along by JWBINX
[Yesterday at 10:22:55 AM]


Sauk Unit Youth Elk Tips by high_hunter
[Yesterday at 10:04:16 AM]


3BR Condo in Tacoma with views of the Narrows and Olympic Mountains by Gentrys
[Yesterday at 09:44:45 AM]


Nooksack Archery Tag by high_hunter
[Yesterday at 09:37:52 AM]


Selkirk bull moose. by greenhead_killer
[Yesterday at 07:04:22 AM]


HUNTNNW 2025 trail cam thread and photos by Turner89
[Yesterday at 06:47:37 AM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal