Browning X Bolt sticky stock

[puyallupaul]

Opened safe after a few months. I had not heard anything about it. Purchased in 2011. Has anyone sent theirs in for replacement ? How long did it take ?
Or did you try and clean it ?
Thanks

[Bob33]

There is a recall. I sent mine in to Browning just a couple weeks ago.

https://duratouchsupport.browning.com/

[puyallupaul]

Ok. Sent a packing slip already. Can't print. Windows is too old. On my 280. Win 300 purchased in 2013. Still ok. Should have stayed with Weatherby.
UPS ?  Do they send back to us ?

[MeepDog]

I sent mine in a year ago and there’s a little box on the form that says camo pattern but my gun was black. The box on the form didn’t work, but I selected the pattern I wanted using some black magic that rhymes with “picrosoft maint” and they sent me a SPIFFY new camo pattern stock.

[puyallupaul]

How long did it take ?  Must have missed that box.

[duckmen1]

I sent mine in within the last few years. They did great. Replaced very quickly and used a very similar looking but non duracoat stock. Pretty easy process through their recall. Mine was horrible. The black duratouch stock would turn completely grey while getting wet. Would start getting a melty tacky feel. Once all cleaned and put away in safe it literally melted horribly in safe. I will see if I can dig up pictures. It was very bad. Although currently due to circumstances I am now unable to shoot the rifle. But did love that gun when I did use it years ago. Very accurate. Glad they stood behind the stock defect.

[duckmen1]

A wet day in the woods would melt the stock coating

[puyallupaul]

Ya,. Enough dirt it won't be sticky any more. They said it will take about 3 mos. for black to get it done.

[Dukalr]

I went through this last fall with a Browning Silver Shotgun.  I just called the Browning service folks in Arnold, MO and discussed it with them.  They gave me some different options for camo finishes and i sent it in.  My shotgun came back looking brand new (and i had used it quite a bit on the salt).  They even replaced a few parts on the gas piston free of charge.  I was a bit skeptical going into it, but completely happy in the end.  I should have done it sooner.  They had my gun for about 3.5-4mo total door to door if i recall.

[G.R.K]

Browning and Winchester had this problem going back 20yrs now.
I thought they learned from the A-bolts with that problem 

[G.R.K]

.

[JWBINX]

Browning will send you a call tag to pick up and they can return it to you for repair basis only.
Do it now and you will have it back before you know it and way before hunting season.

Browning never applied Dura-touch finish to A-bolts.

[G.R.K]

A-bolt stock in the picture with dura-touch.
Item Number
035024208
UPC
023614238560
Action Length
Short Action
Caliber
223 Rem
Barrel Length
24"
Overall Length
43 3/4"
Length of Pull
13 3/8"
Drop at Comb
5/8"
Drop at Heel
1/2"
Weight
7 lbs 15 oz
Magazine Capacity
5
Twist Rate
12"
Barrel Finish
Matte Blued
Stock Finish
Dura-Touch Armor Coating
Receiver Finish
Matte Blued
Chamber Finish
Polished
Barrel Material
Steel
Barrel Contour
Light Varmint
Stock Material
Composite
Recoil Pad
Polymer
Magazine Type
Hinged Floorplate with Detachable Box
Trigger Guard Engraving
None
Drilled and Tapped for Scope
Yes
MSRP
$811

[JWBINX]

A bolts were discontinued in 1994 long before Dura-touch.
Some after market company must have applied a similar finish. 

Some A bolt stocks did turn a little chalky, but never sticky.

[Bob33]

From what I've read thr Dura Tech issues were on guns produced between 2007 and 2017.

[JWBINX]

From what I've read thr Dura Tech issues were on guns produced between 2007 and 2017.

That is correct.

[ASHQUACK]

I sent in a Maxus that was bad. They re-did the finish and thoroughly cleaned and replaced parts that needed replaced. They said it would be gone for 16 weeks and they were spot on. Gun looks brand new and functions flawlessly.

[Fastass350]

I have an older Fabarms 12 ga that got sticky years ago, I tried a few things then finally just clear coated it with some rustoleum and it’s been great ever since. I didn’t have the recall option though.

[Scruffy]

Glad to see there is a recall on this.  I have a Browning X Bolt 30-06 I won at the REMF banquet and the stock is sticky and kinda peeling.  I thought it was something I done to it.  I get real leery about sending stuff in for repairs but I guess I will have to trust the process.  I love this rifle and is my favorite.

In this state can they mail it back directly to you or does it need to be mailed to an FFL??

[puyallupaul]

If anybody in the future has the old windows printing issue, take a pic with phone and take it to UPS store.
They can send it to their PC and print is full size.

[MeepDog]

 
Also on the note of future people reading this thread, go to your local driving range and check their dumpster because golf club boxes fit long guns almost perfectly. They even come with shims that keep the barrel centered in the box. The UPS guy gave me that tip.

[ASHQUACK]

Glad to see there is a recall on this.  I have a Browning X Bolt 30-06 I won at the REMF banquet and the stock is sticky and kinda peeling.  I thought it was something I done to it.  I get real leery about sending stuff in for repairs but I guess I will have to trust the process.  I love this rifle and is my favorite.

In this state can they mail it back directly to you or does it need to be mailed to an FFL??

Ups dropped mine off at my doorstep.

[duckmen1]

Glad to see there is a recall on this.  I have a Browning X Bolt 30-06 I won at the REMF banquet and the stock is sticky and kinda peeling.  I thought it was something I done to it.  I get real leery about sending stuff in for repairs but I guess I will have to trust the process.  I love this rifle and is my favorite.

In this state can they mail it back directly to you or does it need to be mailed to an FFL??

Ups dropped mine off at my doorstep.

Same. I dropped off at FFL. Waited for a call to pick up. Then one day UPS came and dropped off at the house.

[Bob33]

I shipped mine off on February 5th and got an email today with a return shipping tracking number.

[puyallupaul]

Reread your post. 5 weeks is pretty good. Is your black ?

[Bob33]

Reread your post. 5 weeks is pretty good. Is your black ?

Yes my stock is black.

[puyallupaul]

Will have to check the 300 Win. every couple of mos.

[JKEEN33]

I’m sending my SX3 in. They sent me a UPS label and said take it to UPS. Do I take to UPS or does this have to go through an ffl?

[Bob33]

I’m sending my SX3 in. They sent me a UPS label and said take it to UPS. Do I take to UPS or does this have to go through an ffl?

Take it to UPS. No FFL needed. My UPS shipper even boxed mine for me.

[JKEEN33]

I’m sending my SX3 in. They sent me a UPS label and said take it to UPS. Do I take to UPS or does this have to go through an ffl?

Take it to UPS. No FFL needed. My UPS shipper even boxed mine for me.

Appreciate the reply!

[Bob33]

Gun is back. Goo is gone. Five and a half weeks from shipped out date. All for no charge. I'm happy with that.

[MeepDog]

Gun is back. Goo is gone. Five and a half weeks from shipped out date. All for no charge. I'm happy with that.

Did they send it back black or did you have them add a pattern/color?

[Bob33]

Gun is back. Goo is gone. Five and a half weeks from shipped out date. All for no charge. I'm happy with that.

Did they send it back black or did you have them add a pattern/color?

They sent it back black which is what I had before. I don't mind black so I didn't consider changing it.

[puyallupaul]

Got the 280 back. 7.5 weeks. 300W still ok.  Took a chance and mailed it to them in original box. Came back in the box.

[MADMAX]

Thanks
I had no idea in regards to recall
I’ll be looking into it

[puyallupaul]

Hopefully yours is still ok. I would check it every couple a months or so.

[MADMAX]

I’m good
Little funky but not bad

No end date on the factory fix
If it gets any worse it goes in