collapse

Advertisement


Author Topic: hardshell clamming  (Read 14897 times)

Offline highmuley

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Sep 2010
  • Posts: 615
  • Location: Republic
hardshell clamming
« on: April 15, 2015, 10:03:27 AM »
Good morning all,

The woman and I are looking to collect some hardshell clams but are unsure on where. We regularly razor clam in grayland. I know willapa bay offers some opportunity. Any advice on beaches and techniques would be greatly appreciated. Thanks in advance folks.
Its the goin'.....Not the gettin'

Offline lokidog

  • Trade Count: (+6)
  • Explorer
  • ******
  • Join Date: Mar 2009
  • Posts: 15186
  • Location: Sultan/Wisconsin
Re: hardshell clamming
« Reply #1 on: April 15, 2015, 10:39:32 AM »
Many moons ago, and a decade or so added in, I dug steamers with some friends somewhere off HWY 105 on the north end of Willapa Bay.  Sorry I can't be more helpful than that.  As the tide goes out, watch for little siphon sprays and dig/rake there.  Or, just look for siphon holes, they are quite small for steamers.  Once you find a patch, dig parallel to the water.  From my experience, the Manilas are not deeper than 6 inches, but others might have different ideas on that.  Remember to bring a gauge as there is a minimum size on them.

Offline Carp Commander

  • WA State Trappers Association
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Jun 2012
  • Posts: 541
  • Location: Tri-Cities, WA
  • Groups: Washington Bowfishing Association
Re: hardshell clamming
« Reply #2 on: April 15, 2015, 11:35:52 AM »
Willapa Bay is one of my favorites. Follow the link below for directions. No shovel needed just a good rake and not a leaf rake. Make sure and double check for health department closures. At Willapa you do not need a minus tide just be there about two hours before low tide and follow it out. You will be surprised how quickly you get limits. Concentrate around patches of smaller gravel. I will be over there in May so let me know how you do.

Nemah is my favorite spot.

http://wdfw.wa.gov/fishing/shellfish/beaches/MapArea/14/

http://wdfw.wa.gov/fishing/shellfish/beaches/2015WDFWBeachSeasonsBarChart.pdf
"Smoked carp taste just as good as smoked salmon, when you ain't got no salmon"

Rancid Crabtree

Offline Buckmark

  • Washington For Wildlife
  • Trade Count: (+17)
  • Old Salt
  • ******
  • Join Date: Oct 2008
  • Posts: 5455
  • Location: GPS is searching
Re: hardshell clamming
« Reply #3 on: April 15, 2015, 11:48:03 AM »
Dosewallips st park, easy drive from bonney lake, and you can get oysters also.. 
To hunt and butcher an animal is to recognize that meat is not some abstract form of protein that springs into existence tightly wrapped in cellophane and styrofoam.

Offline WSU

  • Political & Covid-19 Topics
  • Trade Count: (+1)
  • Old Salt
  • ******
  • Join Date: Mar 2009
  • Posts: 5534
Re: hardshell clamming
« Reply #4 on: April 15, 2015, 12:05:36 PM »
Look at WDFW's website and the list of beaches.  I've found the information to be very useful.  You should be able to find something a lot closer than Willapa.

Offline Fastass350

  • Past Sponsor
  • Trade Count: (+11)
  • Sourdough
  • *****
  • Join Date: Mar 2010
  • Posts: 2108
  • Location: Salmon, ID
Re: hardshell clamming
« Reply #5 on: April 15, 2015, 12:17:23 PM »
Yep, Nemah is my favorite spot too. PM me I can lead you to the spot I go. Little bit of a brushy rd that I go so don't take anything too fancy  ;)

Offline highmuley

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Sep 2010
  • Posts: 615
  • Location: Republic
Re: hardshell clamming
« Reply #6 on: April 15, 2015, 09:22:43 PM »
Thank you all for the info...its right along the lines of my thoughts.... Thank you again for the input....I sincerely appreciate it.. 
Its the goin'.....Not the gettin'

Offline bearhunter99

  • Business Sponsor
  • Trade Count: (+35)
  • Frontiersman
  • *****
  • Join Date: Apr 2009
  • Posts: 3224
  • Location: Monitor
Re: hardshell clamming
« Reply #7 on: April 01, 2025, 09:22:12 PM »
Resurrecting a dead thread - sorry but I couldn’t find any other threads. 

Family is staying in Long Beach this week and have done great on Razors but would like to get some steamers too….   Never have clammed for hard shell clams and it looks like there are beaches open currently on the other side of Willapa Bay but we have no idea what we are doing or what equipment we need….  Any input would be greatly appreciated!  Thanks. 


Sent from my iPhone using Tapatalk
RIP Colockumelk   :salute:

"We sleep soundly in our beds because rough men stand ready in the night to visit violence on those who would do us harm." – Winston Churchill



Genesis 27:3
Now therefore take, I pray thee, thy weapons, thy quiver and thy bow, and go out to the field, and take me some venison

Offline CastleRocker

  • Trade Count: (+6)
  • Sourdough
  • *****
  • Join Date: Dec 2008
  • Posts: 1035
  • Location: Castle Rock, WA
Re: hardshell clamming
« Reply #8 on: April 02, 2025, 06:21:36 AM »
Look at WDFW's website and the list of beaches.  I've found the information to be very useful.  You should be able to find something a lot closer than Willapa.

Sounds like the same road we go down.  My kids named it "The Angry Road" when they were little.  Like you said; don't take a nice rig down it. 
Work to live, don't live to work.

You can educate away ignorance, sober up drunkenness, but you can't fix stupid.

Offline pd

  • Trade Count: (+7)
  • Frontiersman
  • *****
  • Join Date: Nov 2012
  • Posts: 2573
  • Location: Seattle?
Re: hardshell clamming
« Reply #9 on: April 02, 2025, 10:57:21 AM »
Wow.  Ten years since the last post.  This forum is a gold mine!

Good luck.  Razors are also available right now.
Si vis pacem, para bellum

Offline bearhunter99

  • Business Sponsor
  • Trade Count: (+35)
  • Frontiersman
  • *****
  • Join Date: Apr 2009
  • Posts: 3224
  • Location: Monitor
Re: hardshell clamming
« Reply #10 on: April 02, 2025, 01:40:57 PM »
Yeah, we got five limits yesterday another 5 today.  Headed out tomorrow for razors again.  Just saw something about steamers and that Willapa was open.  Looked around on this site and this was the only thread I could find but the links above are dead. Just trying to find something else for the family to do.
RIP Colockumelk   :salute:

"We sleep soundly in our beds because rough men stand ready in the night to visit violence on those who would do us harm." – Winston Churchill



Genesis 27:3
Now therefore take, I pray thee, thy weapons, thy quiver and thy bow, and go out to the field, and take me some venison

Offline metlhead

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Feb 2014
  • Posts: 1765
  • Location: sw wa
Re: hardshell clamming
« Reply #11 on: April 02, 2025, 02:20:21 PM »
Hawkes Pt. east of Tokeland is very easy for steamers. No need for a rake. About a hundred yards out we just shuffle around barefoot. Easy to feel em. Takes 15min. Daughter figrd that out years ago while I was sweating the rake.

 


* Advertisement

* Recent Topics

Drew Pogue Quality by OutHouse
[Today at 01:50:31 PM]


cougar calling locations by 7t9cobra
[Today at 01:26:35 PM]


2025 Quality Chewuch Tag by OutHouse
[Today at 01:00:01 PM]


Palouse buck deer by ellensburgpo
[Today at 12:41:30 PM]


What gmu's in sw Washington hold elk? by pianoman9701
[Today at 12:27:00 PM]


2025 blacktail rut thread by WSU
[Today at 12:05:59 PM]


Two stories for you (no deer were harmed in the making) by no.cen.wa
[Today at 11:46:20 AM]


2nd Annual American Legion Post#14 Christmas Tree Sale Starts 11/30/25 by pianoman9701
[Today at 11:35:07 AM]


Smith-Reynolds American Legion Post #14 Fall Raffle by pianoman9701
[Today at 11:28:40 AM]


Operation Hardwater 2026 by Southpole
[Today at 11:24:48 AM]


Grizzly? by dilleytech
[Today at 11:16:30 AM]


What are some good 12 ga factory loads for predators? by metlhead
[Today at 11:09:53 AM]


New from Zwickey by Sandberm
[Today at 11:03:48 AM]


Huck 121 Youth Elk by hunter399
[Today at 10:58:00 AM]


What pond creature am I dealing with here? by pianoman9701
[Today at 10:36:51 AM]


New scope or not? by C-Money
[Today at 09:45:22 AM]


MT B tag by HntnFsh
[Today at 09:41:23 AM]


Quality deer hunt by C-Money
[Today at 09:13:09 AM]


Drew A Bull Moose Tag - 49 Degrees North A, Late hunt NOV 1st- NOV 30th by trophyhunt
[Today at 08:48:58 AM]


121 Quality November 20-24 by jrebel
[Today at 08:39:59 AM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal