collapse

Advertisement


Author Topic: Rubber bullets  (Read 10728 times)

Offline metlhead

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Feb 2014
  • Posts: 1692
  • Location: sw wa
Rubber bullets
« on: March 18, 2025, 06:56:39 PM »
Anyone ever load revolver with rubber bullets? See that some plinking loads are primer only but are a bit lame. For .45lc, haven't found any recipe for adding a few grains of powder or is that sumpin just not done?

Offline 300rum

  • Non-Hunting Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Aug 2008
  • Posts: 2359
Re: Rubber bullets
« Reply #1 on: March 19, 2025, 02:43:07 PM »
You can use a primer only and then press the case into wax to make a wax bullet.  I'd be worried that a rubber bullet would bounce everywhere unless you had some kind of trap.  Wax bullets have been used for some time. 

I think the problem with just a few grains of some kind of smokless powder is that you get too much "air space" and get more of a detonation rather than an ignition.  Maybe if you use blackpowder in order to get more volume? 

Offline CP

  • Trade Count: (+6)
  • Old Salt
  • ******
  • Join Date: Mar 2008
  • Posts: 7073
  • Location: Mukilteo
Re: Rubber bullets
« Reply #2 on: March 19, 2025, 03:25:03 PM »
Primer only is likely to result in a stuck bullet.  You'd be better off trying Trail Boss, Red dot, or something similar. 

Make sure that your bullet actually exits the barrel before you set off another round.




Offline EnglishSetter

  • Trade Count: (+2)
  • Scout
  • ****
  • Join Date: Nov 2024
  • Posts: 318
  • Location: Winlock
  • Groups: NRA
Re: Rubber bullets
« Reply #3 on: March 19, 2025, 08:41:17 PM »
You can use a primer only and then press the case into wax to make a wax bullet.  I'd be worried that a rubber bullet would bounce everywhere unless you had some kind of trap.  Wax bullets have been used for some time. 

I think the problem with just a few grains of some kind of smokless powder is that you get too much "air space" and get more of a detonation rather than an ignition.  Maybe if you use blackpowder in order to get more volume?

TMK that's what the quickdraw guys do.

Speer makes plastic cases and bullet that are recoverable and use a lone large pistol primer.  I don't think 45.


Offline EnglishSetter

  • Trade Count: (+2)
  • Scout
  • ****
  • Join Date: Nov 2024
  • Posts: 318
  • Location: Winlock
  • Groups: NRA
Re: Rubber bullets
« Reply #4 on: March 19, 2025, 08:46:01 PM »
Primer only is likely to result in a stuck bullet.  You'd be better off trying Trail Boss, Red dot, or something similar. 

Make sure that your bullet actually exits the barrel before you set off another round.

I suspect you can't hurt the gun with primer only even if a squib.  Still would be best practice.  Certainly before any regular ammo was fired.

Offline Rat44

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Oct 2015
  • Posts: 171
  • Location: Tacoma,Wa
  • Groups: RMEF,NRA,GOA
Re: Rubber bullets
« Reply #5 on: March 19, 2025, 09:37:35 PM »

Speer makes plastic cases and bullet that are recoverable and use a lone large pistol primer.  I don't think 45.
[/quote]

I have had a box of the 44 Mag for years.
Shot them in a S&W 29 a lot.
Never seen them in a long time.

 


* Advertisement

* Recent Topics

Calling in August in Western Washington by Jrtishchuk
[Yesterday at 11:44:39 PM]


Mt. St. Helens Goat by CNELK
[Yesterday at 10:21:34 PM]


Selling Pistols and rifles by Rat44
[Yesterday at 09:45:29 PM]


Apps per Tag for Muzzy Elk by High Climber
[Yesterday at 09:21:16 PM]


Muzzleloader Scope by Dan-o
[Yesterday at 08:24:45 PM]


Ross Lake boat launch? by Oldguy
[Yesterday at 08:14:32 PM]


Gots me a new/old rockchuck rifle coming by JDHasty
[Yesterday at 07:54:20 PM]


Muzzleloader scope options by trophyhunt
[Yesterday at 06:13:21 PM]


AUCTION: Custom knife by Alden Cole by Dan-o
[Yesterday at 05:59:26 PM]


Lots of coho by baldopepper
[Yesterday at 05:57:42 PM]


newbie bear field dressing and hide by KNOPHISH
[Yesterday at 05:21:23 PM]


GMU 247 Entiat bear hunting by jstone
[Yesterday at 04:58:38 PM]


More Kings! by Crunchy
[Yesterday at 04:38:57 PM]


Spot lock in the salt? by GWP
[Yesterday at 08:04:10 AM]


Anybody breeding meat rabbit? by HighlandLofts
[Yesterday at 02:36:05 AM]


Wall Tents Tips and Tricks by ghosthunter
[July 26, 2025, 10:33:57 PM]


2025 Washington Rocky Mountain Bighorn Sheep Raffle by trophyhunt
[July 26, 2025, 08:15:41 PM]


Nice bull? by Kingofthemountain83
[July 26, 2025, 06:01:05 PM]


Tease 'l' by kellama2001
[July 26, 2025, 12:09:30 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal