collapse

Advertisement


Author Topic: Rubber bullets  (Read 10724 times)

Offline metlhead

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Feb 2014
  • Posts: 1692
  • Location: sw wa
Rubber bullets
« on: March 18, 2025, 06:56:39 PM »
Anyone ever load revolver with rubber bullets? See that some plinking loads are primer only but are a bit lame. For .45lc, haven't found any recipe for adding a few grains of powder or is that sumpin just not done?

Offline 300rum

  • Non-Hunting Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Aug 2008
  • Posts: 2359
Re: Rubber bullets
« Reply #1 on: March 19, 2025, 02:43:07 PM »
You can use a primer only and then press the case into wax to make a wax bullet.  I'd be worried that a rubber bullet would bounce everywhere unless you had some kind of trap.  Wax bullets have been used for some time. 

I think the problem with just a few grains of some kind of smokless powder is that you get too much "air space" and get more of a detonation rather than an ignition.  Maybe if you use blackpowder in order to get more volume? 

Offline CP

  • Trade Count: (+6)
  • Old Salt
  • ******
  • Join Date: Mar 2008
  • Posts: 7073
  • Location: Mukilteo
Re: Rubber bullets
« Reply #2 on: March 19, 2025, 03:25:03 PM »
Primer only is likely to result in a stuck bullet.  You'd be better off trying Trail Boss, Red dot, or something similar. 

Make sure that your bullet actually exits the barrel before you set off another round.




Offline EnglishSetter

  • Trade Count: (+2)
  • Scout
  • ****
  • Join Date: Nov 2024
  • Posts: 317
  • Location: Winlock
  • Groups: NRA
Re: Rubber bullets
« Reply #3 on: March 19, 2025, 08:41:17 PM »
You can use a primer only and then press the case into wax to make a wax bullet.  I'd be worried that a rubber bullet would bounce everywhere unless you had some kind of trap.  Wax bullets have been used for some time. 

I think the problem with just a few grains of some kind of smokless powder is that you get too much "air space" and get more of a detonation rather than an ignition.  Maybe if you use blackpowder in order to get more volume?

TMK that's what the quickdraw guys do.

Speer makes plastic cases and bullet that are recoverable and use a lone large pistol primer.  I don't think 45.


Offline EnglishSetter

  • Trade Count: (+2)
  • Scout
  • ****
  • Join Date: Nov 2024
  • Posts: 317
  • Location: Winlock
  • Groups: NRA
Re: Rubber bullets
« Reply #4 on: March 19, 2025, 08:46:01 PM »
Primer only is likely to result in a stuck bullet.  You'd be better off trying Trail Boss, Red dot, or something similar. 

Make sure that your bullet actually exits the barrel before you set off another round.

I suspect you can't hurt the gun with primer only even if a squib.  Still would be best practice.  Certainly before any regular ammo was fired.

Offline Rat44

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Oct 2015
  • Posts: 168
  • Location: Tacoma,Wa
  • Groups: RMEF,NRA,GOA
Re: Rubber bullets
« Reply #5 on: March 19, 2025, 09:37:35 PM »

Speer makes plastic cases and bullet that are recoverable and use a lone large pistol primer.  I don't think 45.
[/quote]

I have had a box of the 44 Mag for years.
Shot them in a S&W 29 a lot.
Never seen them in a long time.

 


* Advertisement

* Recent Topics

Anybody breeding meat rabbit? by HighlandLofts
[Today at 02:36:05 AM]


AUCTION: Custom knife by Alden Cole by b0bbyg
[Yesterday at 10:51:49 PM]


Wall Tents Tips and Tricks by ghosthunter
[Yesterday at 10:33:57 PM]


Spot lock in the salt? by CastleRocker
[Yesterday at 09:53:21 PM]


More Kings! by bigdub257
[Yesterday at 09:42:31 PM]


2025 Washington Rocky Mountain Bighorn Sheep Raffle by trophyhunt
[Yesterday at 08:15:41 PM]


Calling in August in Western Washington by bearmanric
[Yesterday at 06:43:42 PM]


Nice bull? by Kingofthemountain83
[Yesterday at 06:01:05 PM]


Tease 'l' by kellama2001
[Yesterday at 12:09:30 PM]


newbie bear field dressing and hide by Sliverslinger
[Yesterday at 10:14:02 AM]


1 week till bear killin time! by Sliverslinger
[Yesterday at 10:12:07 AM]


Son drawn - Silver Dollar Youth Any Elk - Help? by muleburger
[Yesterday at 09:54:03 AM]


wyoming pronghorn draw by dagon
[Yesterday at 08:59:21 AM]


Stealth Cam QV20 by Kingofthemountain83
[July 25, 2025, 07:42:11 PM]


Taxidermy Issues....HELP! by Magnum_Willys
[July 25, 2025, 04:38:49 PM]


2025 Canning by 3boys
[July 25, 2025, 02:51:04 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal