collapse

Advertisement


Author Topic: Jon Boat Pod thoughts?  (Read 8002 times)

Offline Happy Gilmore

  • Business Sponsor
  • Trade Count: (+1)
  • Old Salt
  • *****
  • Join Date: Jul 2008
  • Posts: 5141
  • Location: Ronan, MT
Jon Boat Pod thoughts?
« on: March 23, 2025, 12:21:49 PM »
I picked up a 14' Alumacraft jon boat. Plan to use it for lake fishing when it's too windy or, bigger lakes and the river.

I've seen add on pods. Seems like a good idea. I'm planning on finding a 15hp for it. That's the max HP allowed where I'm at now. (Flathead River)

Any recommendations? I've seen some can bolt on. I've seen some that says they can be bolted or welded.

Thoughts?
"Far better it is to dare mighty things, to win glorious triumphs, even though checked by failure, than to take rank with those poor spirits who neither enjoy much nor suffer much, because they live in the grey twilight that knows not victory nor defeat."
Theodore Roosevelt 1899

Offline Sakko300wsm

  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Sourdough
  • *****
  • Join Date: Dec 2015
  • Posts: 1167
  • Location: Lynden / Curlew
  • Groups: Sakko300wsm
Re: Jon Boat Pod thoughts?
« Reply #1 on: March 23, 2025, 12:59:39 PM »
I would definitely go welded

Offline Stein

  • Non-Hunting Topics
  • Trade Count: (+11)
  • Explorer
  • ******
  • Join Date: Sep 2013
  • Posts: 13026
  • Location: Arlington
Re: Jon Boat Pod thoughts?
« Reply #2 on: March 23, 2025, 01:07:13 PM »
I would also go welded, any time I have drilled into a transom I have wished I didn't unless you don't plan on keeping the boat long term.  Water always creeps in no matter how careful you are and you'll be drilling below the waterline for sure.

Offline Born2late

  • Non-Hunting Topics
  • Trade Count: (+21)
  • Longhunter
  • *****
  • Join Date: Nov 2012
  • Posts: 783
Re: Jon Boat Pod thoughts?
« Reply #3 on: March 23, 2025, 02:45:14 PM »
I would probably make out riggers that bolt on easily to hold the pods that way they are removable for when you don’t want them on there. Also if you’re hauling the boat on a trailer how will the pods interfere with it will determine what you can do. If you’re hauling it I would make some quick change mounts so the pods will slip in and secure in seconds. I did something similar to a canoe I shipped to Alaska to fish for silvers with and it worked awesome, until it blew away in a 90 mph wind storm and went out to sea.
Any holes you put through the side use 5200 sealant on when assembling it to seal it.

Offline Happy Gilmore

  • Business Sponsor
  • Trade Count: (+1)
  • Old Salt
  • *****
  • Join Date: Jul 2008
  • Posts: 5141
  • Location: Ronan, MT
"Far better it is to dare mighty things, to win glorious triumphs, even though checked by failure, than to take rank with those poor spirits who neither enjoy much nor suffer much, because they live in the grey twilight that knows not victory nor defeat."
Theodore Roosevelt 1899

Offline Born2late

  • Non-Hunting Topics
  • Trade Count: (+21)
  • Longhunter
  • *****
  • Join Date: Nov 2012
  • Posts: 783
Re: Jon Boat Pod thoughts?
« Reply #5 on: March 23, 2025, 04:09:24 PM »
Ok, scratch what I just said. I was thinking of pontoons on the side to stabilize and add floatation

Offline storyteller

  • Forum Sponsor
  • Trade Count: (+14)
  • Scout
  • *****
  • Join Date: Jun 2014
  • Posts: 318
  • Location: Marysville
  • Groups: NRA, DU
Re: Jon Boat Pod thoughts?
« Reply #6 on: March 23, 2025, 04:30:22 PM »
Those backwater pods look a lot like Beavertail pods, if you google  them, there was a person with a video who used 3M 5200 on  a 100% fay surface seal and proper prep.  After cured, it shows him jumping on them, and  they do not come  off, might check it out as a way to leak proof your installation.    Good luck

Offline Happy Gilmore

  • Business Sponsor
  • Trade Count: (+1)
  • Old Salt
  • *****
  • Join Date: Jul 2008
  • Posts: 5141
  • Location: Ronan, MT
Re: Jon Boat Pod thoughts?
« Reply #7 on: March 23, 2025, 04:48:11 PM »
Ok, scratch what I just said. I was thinking of pontoons on the side to stabilize and add floatation

I was wondering 😀 years ago there used to be a guy who fished above chief jo dam with a canoe. He had outriggers made from large irrigation pipe with ends capped at a nice angle. Used square aluminum tubing he bent to make the frame to attach to the canoe. It was slick.
"Far better it is to dare mighty things, to win glorious triumphs, even though checked by failure, than to take rank with those poor spirits who neither enjoy much nor suffer much, because they live in the grey twilight that knows not victory nor defeat."
Theodore Roosevelt 1899

Offline Happy Gilmore

  • Business Sponsor
  • Trade Count: (+1)
  • Old Salt
  • *****
  • Join Date: Jul 2008
  • Posts: 5141
  • Location: Ronan, MT
Re: Jon Boat Pod thoughts?
« Reply #8 on: March 23, 2025, 04:49:18 PM »
Those backwater pods look a lot like Beavertail pods, if you google  them, there was a person with a video who used 3M 5200 on  a 100% fay surface seal and proper prep.  After cured, it shows him jumping on them, and  they do not come  off, might check it out as a way to leak proof your installation.    Good luck

Will look for that video. I know 5200 is permanent.
"Far better it is to dare mighty things, to win glorious triumphs, even though checked by failure, than to take rank with those poor spirits who neither enjoy much nor suffer much, because they live in the grey twilight that knows not victory nor defeat."
Theodore Roosevelt 1899

 


* Advertisement

* Recent Topics

Bear Season 2025 by BreezyBear
[Today at 01:04:48 PM]


GROUSE 2025...the Season is looming! by Dave Workman
[Today at 12:54:35 PM]


Scope/mount options Ruger Ranch 5.56 by Westside88
[Today at 12:25:46 PM]


Anti-Snagging Rule ? by KNOPHISH
[Today at 11:29:59 AM]


Still no bears by Goshawk
[Today at 11:21:35 AM]


Stone Glacier packs by pickardjw
[Today at 11:12:41 AM]


Cougar Tips by Deer slayer
[Today at 10:01:19 AM]


It's Starting by nwwanderer
[Today at 08:16:10 AM]


Beaver Traps 4 Sale by Katalla
[Today at 06:12:26 AM]


Koro Traps 4 Sale by Katalla
[Today at 05:29:58 AM]


Ten Years, and still plugging along by Dave Workman
[Today at 03:58:36 AM]


Bass Pro Strikes Again by Rat44
[Today at 02:59:17 AM]


Looking for a hunting partner by vincepnw
[Yesterday at 10:51:51 PM]


AUCTION: Custom knife by Alden Cole by b0bbyg
[Yesterday at 10:12:34 PM]


Lund Fisherman 1800 info/advice by lewy
[Yesterday at 08:43:58 PM]


High buck hunt by bmc02
[Yesterday at 06:07:22 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal