90's Yamaha no telltale?

[Stein]

Our Scout troop inherited what I believe to be a 90's Yamaha 15 we intend to use on our safety mini-RIB for canoe trips.  I tried looking up the serial number and apparently it was made in Japan for the Japanese market and thus has zero info available online.  I went through it, replaced a few things and it fires up first pull.

The only problem is that it doesn't seem to have a telltale which I thought were on all outboards.  I did some Google-fu and it sounds like outboards from the 60's and 70's may not have them but I didn't see anything from the 90's.

My concern is that without one I can't verify the coolant system is working.  The impeller looks great and there are a couple bypass holes above and forward of the prop that water comes out of when it's running so I'm mostly confident it is cooling.

Does anyone have experience with a motor like this make and vintage without a telltale?

I plan on taking it out for sea trials tomorrow but would like to be 100% sure before we do something that can't be fixed.

[MADMAX]

Your talking the pee-er ?

https://www.reddit.com/r/boats/comments/1la4tps/90s_yamaha_15hp_2_stroke/

[RB]

I was thinking same as MADMAX is it not peeing? Have had similar issues with my eight horse Honda bugs will clog up the pee tube and it will not pee. Took me a while to figure it out cause the hose was not easily seen. To my knowledge every outboard should pee, unless it is somehow air-cooled.

[MeepDog]

I had a 1975ish Johnson 15 that didn’t pee by design. I’ve never heard of that with Yamaha. Your best bet would be to clean out the passages or find some other way of verifying function because no coolant means toasted heads and bearings. Bad juju

Try running it with muffs instead of in a bucket and see what the water does.

[Crunchy]

Ive had the no pee a couple of times with different motors.  I used weedwacker line to push through the pee hole and hose to clear the line. I also removed the hose from the motor and pushed the line into the engine as well.  If that doesn't work you might need a new impeller.  Plenty of YouTube videos on how to fix.

[Stein]

There is no hole as far as I can tell.  I've looked it over several times, both sides, back, can't find a hole that water would come out of.

[Longfield1]

Whats the model number?

[Stein]

Tag says:

Yamaha 15D
684CS 02562x

x is some digit that is too corroded over to read, maybe 9.

[Stein]

This thread seems to think it's a 1994 sold in Japan.

https://www.yamahaoutboardparts.com/forum/general-discussion/yamaha-outboard-forum/25037-yamaha-serial-number

[Stein]

When I went through it, impeller and seals all looked great, almost brand new.  I couldn't find any water tube under the cowling or any opening anywhere I've ever seen a telltale opening, no holes above the waterline at all except the upper exhaust.