collapse

Advertisement


Author Topic: 1/2 Life size bear mount  (Read 10080 times)

Offline Bones

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: May 2007
  • Posts: 152
1/2 Life size bear mount
« on: July 07, 2007, 05:18:29 AM »
Do any of you taxidermists have a pic of a 1/2 or 3/4 size bear mount?  I saw one of these mounts at a sportsmans show a couple of years ago, and it was the best looking bear mount I have ever seen. That mount was a very large bear. Also does any one have a pose or mannikin they recommend. We have a really nice bear hanging around our house this summer. Every time I am out BBQing, he comes out of the woods and into our yard. He has a nice white patch on his chest. If he is still doing this when bear season opens, he will be a nice archery target. I am not a taxidermisy and do not plan doing the mount myself if I do get this bear. I have seen the half sized mounts of smaller bears, and they look like dogs in my opinion. I have only seen one mount of a large bear this way and I really liked the mount. Thanks for any help.
Bones

Offline Bones

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: May 2007
  • Posts: 152
Re: 1/2 Life size bear mount
« Reply #1 on: July 07, 2007, 05:41:33 AM »
This is a pic of the bear. it is not good quality because it is a still from a video tape. This bear shows up every time I light the grill. I have to put the grill in the garage at night because twice he has come onto our deck at night and turned the grill over.


Offline billythekidrock

  • Varmint
  • Trade Count: (+1)
  • Explorer
  • ******
  • Join Date: Mar 2007
  • Posts: 13440
Re: 1/2 Life size bear mount
« Reply #2 on: July 07, 2007, 06:26:11 AM »
Mount it just like that, slightly turned head and alert. Don't have it's mouth open or try to make it look menacing.

Good luck.




Offline Bones

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: May 2007
  • Posts: 152
Re: 1/2 Life size bear mount
« Reply #3 on: July 07, 2007, 09:24:46 AM »
Billy,  The mount I saw  the bear was standing but not erect. The mouth was slightly open but not snarling, The front legs were hanging down and not reaching or fighting. It was an awesome mount.

Offline huntnfmly

  • Trade Count: (+36)
  • Frontiersman
  • *****
  • Join Date: Apr 2007
  • Posts: 4721
Re: 1/2 Life size bear mount
« Reply #4 on: July 07, 2007, 02:32:20 PM »
Thats going to make a nice mount.Nice bear.
good luck keep us posted
I'm your dam tour guide Arnie please don’t wonder off the dam tour.
Take as many dam pictures as you want ....
Are there any dam questions ..

Offline Otto1

  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Apr 2007
  • Posts: 297
Re: 1/2 Life size bear mount
« Reply #5 on: July 08, 2007, 10:32:56 AM »
Do any of you taxidermists have a pic of a 1/2 or 3/4 size bear mount? 

if I was to do it again I would for sure do a half size mount

here are a few pictures of a bear I got talked into doing a life size mount on and you can see where it sits now. Just do not have the "room"  maybe someday when I move I will get my own "room"

Been thinking of donating this mount to some kind of museum or something.












Offline Otto1

  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Apr 2007
  • Posts: 297
Re: 1/2 Life size bear mount
« Reply #6 on: July 08, 2007, 10:34:21 AM »
I guess it would not be that hard to cut it off and make it a 1/2 mount.....just thought of that... Hey Michelle what would a modification like that run?

Offline Michelle_Nelson

  • Trade Count: (-1)
  • Old Salt
  • ******
  • Join Date: Apr 2007
  • Posts: 7974
  • Location: Rochester, Washington
  • Bring on the Bears!
Re: 1/2 Life size bear mount
« Reply #7 on: July 08, 2007, 04:51:31 PM »
It can be done if the hide was properly tanned.  How old is the mount? 

Offline Otto1

  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Apr 2007
  • Posts: 297
Re: 1/2 Life size bear mount
« Reply #8 on: July 08, 2007, 09:50:50 PM »
Not sure how it was tanned, but I know the taxidermist that did it sent it out somewhere... The mount is about ten years old.. It hasnt lost any hair that I have noticed over the years so I suppose it was prolly a quality job?

It was done at Cedar River Taxidermy out by Selick in eastern King County..

Offline Michelle_Nelson

  • Trade Count: (-1)
  • Old Salt
  • ******
  • Join Date: Apr 2007
  • Posts: 7974
  • Location: Rochester, Washington
  • Bring on the Bears!
Re: 1/2 Life size bear mount
« Reply #9 on: July 11, 2007, 06:09:26 PM »
Was that Bear shot in the spring? 

I'm not saying it can be done and I am not saying it can't.  It depends on how well the skin holds up durring rehydration. 

The skin around the the mid section of the bear would have to be rehydrated.  Than an incision made around the circumfrance of the bear.  Peal the skin back about 2 inches and foam cut in half.  A piece of ply wood would have to be cut to cover the back of the form and either foamed or bondo into place.  Once that has set up pull the skin around the back of the form and stapple into place.  Let it dry for about a week or so put a hanger on it and done.

The problem with the rehydration process is sometimes, depending on how old the tan is and what type of tan was used once rehydrated the skin can start falling apart like tissue paper.

Probably cost around $100 - $200.

Offline Otto1

  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Apr 2007
  • Posts: 297
Re: 1/2 Life size bear mount
« Reply #10 on: July 11, 2007, 10:34:46 PM »
Thanks Michelle for the replies. The bear was shot in August on the westside of the state (Tiger Mountain) and I have not a clue on the tanning process of which one was used?
I guess when I get an itch I'll have to drag it outa that closet and down to our local taxidermist up here. I do travel down south every so often, so if you get your shop set up I could drop it off....

Offline Michelle_Nelson

  • Trade Count: (-1)
  • Old Salt
  • ******
  • Join Date: Apr 2007
  • Posts: 7974
  • Location: Rochester, Washington
  • Bring on the Bears!
Re: 1/2 Life size bear mount
« Reply #11 on: July 12, 2007, 09:07:57 PM »
It will be atleast 3 1/2 months befor I can get my Taxidermy Licence.  I have to wait 90 days befor I can get my Resident Taxidermy License.

 


* Advertisement

* Recent Topics

Last year putting in… by wa.hunter
[Today at 11:02:00 PM]


HUNTNNW 2025 trail cam thread and photos by huntnnw
[Today at 10:34:36 PM]


Resetting dash warning lights by HUNTINCOUPLE
[Today at 09:57:43 PM]


alkali elk special hunt by Rainier10
[Today at 09:17:12 PM]


Wyoming elk who's in? by Ghost Hunter
[Today at 08:56:09 PM]


Oregon Seed #'s by Brute
[Today at 08:54:20 PM]


What's flatbed pickup life like? by Happy Gilmore
[Today at 08:38:50 PM]


Idaho General Season Going to Draw for Nonresidents by baldopepper
[Today at 08:08:06 PM]


The time clock has started.....and go. by KNOPHISH
[Today at 07:31:05 PM]


Please Report Problems & Bugs Here by Rainier10
[Today at 07:23:55 PM]


Colorado Results by vandeman17
[Today at 02:29:43 PM]


Burrowing Animal by b0bbyg
[Today at 12:43:47 PM]


Cold bore or fouled barrel. by hunter399
[Today at 12:36:22 PM]


DIY Ucluelet trip by CP
[Today at 05:48:15 AM]


Oregon spring bear by time2hunt
[Yesterday at 08:03:28 PM]


WDFW falsely advertising preference points by hunter399
[Yesterday at 04:38:43 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal