fletching?

[Slider]

I build my own arrow's and use wraps. When I first went to blazers I was using Fast-Set Gel. I DID have some Vanes fall off!!! WTF Any way I switches to Lock Tite Super Glue (brush on)and have not had any problems since? Next batch I'm going to use Goat Tuff.

[fishmanbp]

ok let me start by noting that i am an absolute rook in archery. so i just bought some used arrows on ebay. i can tell by the pictures that i am going to want to refletch these arrows before i shoot them. can anyone help with links or info on refletching these myself. i know i could just take em to a shop, but i would rather learn to do it myself.myfirst question would be the best way to remove the fletches that are on the arrows. thanks

[Slider]

You need a fletching removal tool.

http://www.fsdiscountarchery.com/index.asp?PageAction=VIEWCATS&Category=114

[archery288]

a razor blade works good too especially for getting that last bit of glue off.. be careful though so you don't strip the carbon!! then use a rubbing alcohol or something of that nature to rube all excessive oils off of the shafts especially if your gluing them straight to the shaft without using a wrap.  As for glue - well I use goat tuff and have never had a problem with any of my fletching coming off!  Be careful on what vanes you choose as well, that may be the cause of your fletching falling off.  Some manufacturers went through a curing problem and couldn't get the vanes to stick no matter what.  Anyways, thats just my 2 cents..

[coonhound]

Here is my process:
1. Strip the old fletching off with a razor knife, be sure to get all the old glue off
2. Sand the shaft lightly with 320 grit
3. Thoroughly clean the shaft with Acetone
4. Clean the base of the Blazer Vane with Acetone
5. Insert vane into clamp, leave about an 1/8" of space from the base of the vane to the clamp to give the vane a little flexibility to get good contact with the shaft.
6. I use "Flex Bond" glue by flex fletch.  I run a small bead and smooth it out with my finger, less is more when gluing fletching.
7. place the fletch firmly against the shaft, be sure you have firm uniform pressure full length. Sometimes you might need open the clamp slightly to allow the fletch to find a natural seat and finish with firm pressure.
8. Wait at least 5 minutes between vanes.

I have fletched hundreds of arrows with this process and find the vanes to be almost impossible to tear off.  The Blazer vanes are a tall vane, you will want to check for good clearance, you might need to index your knock to avoid your cable guard.

Coon

[Paul Morris]

ok let me start by noting that i am an absolute rook in archery. so i just bought some used arrows on ebay. i can tell by the pictures that i am going to want to refletch these arrows before i shoot them. can anyone help with links or info on refletching these myself. i know i could just take em to a shop, but i would rather learn to do it myself.myfirst question would be the best way to remove the fletches that are on the arrows. thanks

Or just pop of the nock and put a FOB on

If you would like I can go over anyones set up to make sure they are good to go.

Any questions I would be glad to help.

Regards,

[DeKuma]

I agree with the FOB.  It is nice not having to worry about my fletching anymore!
Even if they did not stabilize so well, I would use them just so I did not have to fletch.
I have a deep appreciation for you guys that like to custom fletch and crest your arrows!  I just can not do it myself and do not want to pay to have it done, so the FOB is my logical answer!

[muledude]

Blazers are the the -----.. Then ad the tight point shuttle t locks and you'll think your shooting field points..

[popeshawnpaul]

The FOB and drop away would never work where I hunt.  I crawl through the nastiest brush/stickers you could think of with an arrow nocked on my biscuit.  That combo with blazers and Slick Tricks owns everything I've ever tried.  I think it costs a dollar to refletch one...and I only have a fletch problem once or twice a year.  I'm not sure there is a better hunting combo, period.

While I've heard mixed results on the FOB...I've never heard mixed results with Blazers.  I'm not fixing what isn't broke.

[Slider]

Pope thats because you havn't tried Siver Flames and Blazers!!!.................lol

[grandpawrichard]

Blazers or FOBs, the only way to go!

For me it is Blazers and T4 Turbo Nocks!





Dick

[rosscrazyelk]

Blazers are great and I use the four vanes to. Much better stability

[Skyvalhunter]

By the looks of Granda's targets he shoots both 3 and 4 fletches

[DeKuma]

Looks like Blazers and Turbo Nocks to me.  Heard mixed reviews on the T-nocks, but the concept appears to be sound......

Nice shooting by the way!