collapse

Advertisement


Author Topic: Wood stock refinishing  (Read 2087 times)

Offline washelkhntr

  • Washington For Wildlife
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Dec 2008
  • Posts: 1545
  • Location: Shelton
Wood stock refinishing
« on: January 11, 2010, 01:54:25 PM »
Well, I am going to re-finish a couple wood stocks. Still not sure which ones yet.... :dunno:. I have done a few before but it was years ago. My question to all you experts....after you stain the wood, what are you using for a final finish?
"Once a Chief, always a Chief. Retired and Proud."

Offline coop2424

  • Site Sponsor
  • Non-Hunting Topics
  • Trade Count: (+1)
  • Sourdough
  • *****
  • Join Date: Dec 2008
  • Posts: 1483
  • Location: Spirit Lake, ID
Re: Wood stock refinishing
« Reply #1 on: January 11, 2010, 02:20:09 PM »
I used Tru Oil on my last one and really liked how it turned out.  That is probably what I will use on all of them in the future.   :twocents:

Offline Tim

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Sep 2007
  • Posts: 91
Re: Wood stock refinishing
« Reply #2 on: January 11, 2010, 03:25:41 PM »
Tru-oil works pretty well,I have'nt used it on a rifle yet but I refinished the risers on a couple of recurve bows and it turned out great

Offline thinkingman

  • Trade Count: (+10)
  • Sourdough
  • *****
  • Join Date: Mar 2008
  • Posts: 2363
Re: Wood stock refinishing
« Reply #3 on: January 11, 2010, 04:23:37 PM »
Tung oil
“The whole problem with the world is that fools and fanatics are always so certain of themselves, but wiser men so full of doubts.”
― Bertrand Russell

Offline Big10gauge

  • Site Sponsor
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Aug 2008
  • Posts: 1306
  • Location: Central Wa
Re: Wood stock refinishing
« Reply #4 on: January 11, 2010, 04:26:33 PM »
Tru Oil works great and easy to apply
[smg id=6490]

Offline rasbo

  • Trade Count: (+1)
  • Legend
  • ******
  • Join Date: Aug 2008
  • Posts: 20144
  • Location: Grant county
  • In God I trust...Try taking that away from me!
Re: Wood stock refinishing
« Reply #5 on: January 11, 2010, 04:31:47 PM »
tung oil rocks,get some 0000steel wool,and use between coats to keep smooth,dont rush it.have fun

Offline Huntbear

  • I am a BAD Kitteh
  • Washington For Wildlife
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Nov 2007
  • Posts: 9616
  • Location: Wandering Lost East of the Mountains
  • Y.A.R. Jester aka Smart Ass
    • http://www.facebook.com/profile.php?id=1236486665
Re: Wood stock refinishing
« Reply #6 on: January 11, 2010, 05:34:00 PM »
are you doing a slurry type rub, or just rubbing the stuff on and letting it dry?  Makes a big difference in finish in my opinion.  Doing a slurry, you use 400 grit wet dry and Tru Oil.  Sand in small circles, until you get a nice dust/oil slurry mixture on the stock.  Continue until entire stock is done, then rub down and let dry over night.  The more coats you do, the deeper the finish.  I have seen rifle stocks done this way and it is like looking into a deep pool of water.
By my honorable conduct as a hunter let me give a good example and teach new hunters principles of honor, so that each new generation can show respect for their god, other hunters and the animals, and enjoy the dignity of the hunt.

Calling an illegal alien an 'undocumented immigrant' is like calling a drug dealer an 'unlicensed pharmacist'.

Offline coop2424

  • Site Sponsor
  • Non-Hunting Topics
  • Trade Count: (+1)
  • Sourdough
  • *****
  • Join Date: Dec 2008
  • Posts: 1483
  • Location: Spirit Lake, ID
Re: Wood stock refinishing
« Reply #7 on: January 11, 2010, 06:05:04 PM »
are you doing a slurry type rub, or just rubbing the stuff on and letting it dry?  Makes a big difference in finish in my opinion.  Doing a slurry, you use 400 grit wet dry and Tru Oil.  Sand in small circles, until you get a nice dust/oil slurry mixture on the stock.  Continue until entire stock is done, then rub down and let dry over night.  The more coats you do, the deeper the finish.  I have seen rifle stocks done this way and it is like looking into a deep pool of water.

This is exactly how I did a stock of mine but I used 0000 steel wool.  It came out really nice...

Offline JackOfAllTrades

  • Rasbo said I Ain't Right.
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Feb 2009
  • Posts: 6509
  • Location: Lynden, WA.
  • Μολὼν λαβέ
Re: Wood stock refinishing
« Reply #8 on: January 11, 2010, 07:19:29 PM »
Quote
tung oil rocks,get some 0000steel wool,and use between coats to keep smooth,dont rush it.have fun

 :yeah:

Tung or Linseed oil. Use nylon/lint free towel to buff with after the steel wool between every dry coat of oil.

-Steve
The NRA says I'm a Master!
Colt's, Ruger's, Dan Wesson, & Kimber are my friends!
Proud to be a U.S. Navy Veteran.

If you never follow your dreams, you'll never go anywhere.

Critical thinking keeps people from freaking the hell out every time some half baked blogger forgets his meds. Unlike some of you, I do not have TawkethOutOfAnus© syndrome.

 


* Advertisement

* Recent Topics

KODIAK06 2025 trail cam and personal pics thread by kodiak06
[Today at 10:48:23 AM]


DR Brush Mower won't crank by Rob
[Today at 10:19:24 AM]


Ever win the WDFW Big Game Raffle? by Big6bull
[Today at 10:10:07 AM]


Ground blind for blacktail by kyle_higg
[Today at 10:09:34 AM]


Bow mount trolling motors by Angry Perch
[Today at 09:50:16 AM]


Oregon special tag info by vandeman17
[Today at 09:15:16 AM]


Unknown Suppressors - Whisper Pickle by pickardjw
[Today at 09:12:31 AM]


MA-10 Coho by CP
[Today at 09:01:24 AM]


10 kokes by 206
[Today at 07:51:31 AM]


Hoof Rot by fowl smacker
[Today at 06:28:53 AM]


Honda BF15A Outboard Problems by Sandberm
[Yesterday at 08:18:08 PM]


Idaho General Season Going to Draw for Nonresidents by JDArms1240
[Yesterday at 08:16:36 PM]


Eastern WA-WT hunting from tree stands?? by addicted1
[Yesterday at 06:47:44 PM]


A question for any FFL holders on here by ryan2202
[Yesterday at 05:01:26 PM]


I’m on a blacktail mission by addicted1
[Yesterday at 12:10:11 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal