collapse

Advertisement


Author Topic: Lost Pinwheel User  (Read 2476 times)

Offline konrad

  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Sep 2009
  • Posts: 253
  • Location: South Lake Whatcom, Puget Sound
Lost Pinwheel User
« on: January 31, 2010, 11:51:49 AM »
I am trying to find the fellow out there running Pinwheel software who was kind enough to run some numbers on my set-up. We were discussing shafts required to produce a FOC of 19%.

I seem to have forgotten what thread he was lurking about in.

Thanks for your prompt response!

Konrad


PS   
A: Easton Technical’s program gave me the 2413 shaft size for my current configuration (which works admirably).
B: To answer your question, Yes, I have read almost all of Dr. Ashby’s work and find it to be invaluable.



Thanks again,
KL
“The rifle itself has no moral stature, since it has no will of its own. Naturally, it may be used by evil men for evil purposes, but there are more good men than evil, and while the latter can not be persuaded to the path of righteousness by propaganda, they can certainly be corrected by good men with rifles.”

Col. Jeff Cooper

Offline bonkellekter

  • Washington For Wildlife
  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Dec 2009
  • Posts: 459
  • Location: Spokane, WA
Re: Lost Pinwheel User
« Reply #1 on: January 31, 2010, 11:59:03 AM »
It was TODD ID in the archery forum - I believe the thread was titled - An Offer to Help - Thanks to his post I purchased the software too so if you would like I can run numbers for you as well.

Offline jackelope

  • Administrator
  • Trade Count: (+29)
  • Legend
  • *****
  • Join Date: Mar 2007
  • Posts: 50753
  • Location: Duvall, WA
  • Groups: jackelope
Re: Lost Pinwheel User
« Reply #2 on: January 31, 2010, 12:05:46 PM »
"Hate speech does not exist legally in America. There's ugly speech. There's gross speech. There's evil speech. And ALL of it is protected by the First Amendment."

Offline konrad

  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Sep 2009
  • Posts: 253
  • Location: South Lake Whatcom, Puget Sound
Re: Lost Pinwheel User
« Reply #3 on: January 31, 2010, 10:14:18 PM »
Thanks Guys!

I'll be sure to contact him there.

My rig is an 07 Bear Truth, draw weight 60 pounds, draw length 27 inches and a 29 inch shaft using a mechanical release.

I wanted to know what arrow spine and tip weight would give me a 19% FOC balance point
“The rifle itself has no moral stature, since it has no will of its own. Naturally, it may be used by evil men for evil purposes, but there are more good men than evil, and while the latter can not be persuaded to the path of righteousness by propaganda, they can certainly be corrected by good men with rifles.”

Col. Jeff Cooper

Offline Todd_ID

  • Trade Count: (+1)
  • Frontiersman
  • *****
  • Join Date: Apr 2008
  • Posts: 2926
  • Location: Clarkston
  • Hunt Hard!
Re: Lost Pinwheel User
« Reply #4 on: February 01, 2010, 07:52:51 AM »
http://hunting-washington.com/smf/index.php/topic,43087.msg521240.html#msg521240

Here's the info that the program spit out for you.  Let me know if there's anything else you are needing to know.
Bring a GPS!  It's awkward to have to eat your buddies!

Offline xXx Archery

  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Dec 2007
  • Posts: 699
  • Location: longview Wa
  • Site Sponsors
    • www.xxxarchery.com
Re: Lost Pinwheel User
« Reply #5 on: February 01, 2010, 08:49:48 AM »
Thanks Guys!

I'll be sure to contact him there.

My rig is an 07 Bear Truth, draw weight 60 pounds, draw length 27 inches and a 29 inch shaft using a mechanical release.

I wanted to know what arrow spine and tip weight would give me a 19% FOC balance point

Are you sure about your Draw?     draw length is measured from the string at full draw to the deepest part of the grip and then ADD 1.75" ...27" is short in a other post you said you are shooting 240fps with 490grain arrow so I ran some #'s

Total Arrow Weight: 490
Bow IBO Speed: 317   
Adjustment for Draw Length: -30    at 27" of draw
Adjustment for Draw Weight: -20    At 60lbs
Adjustment for Arrow Weight: -47
Adjustment for Weight on String: -3

Calculated Speed: 217 fps
Kinetic Energy: 51.25

now at 29" of Draw

Total Arrow Weight: 490
Bow IBO Speed: 317
Adjustment for Draw Length: -10
Adjustment for Draw Weight: -20
Adjustment for Arrow Weight: -47
Adjustment for Weight on String: -3

Calculated Speed: 237 fps  This is more inline with what you said you are shooting
Kinetic Energy: 61.13

Co-Owner of xXx Archery and Maker of xXx G-Strings

Offline konrad

  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Sep 2009
  • Posts: 253
  • Location: South Lake Whatcom, Puget Sound
Re: Lost Pinwheel User
« Reply #6 on: February 01, 2010, 08:01:05 PM »
I started with the 29 inch draw module and have dropped down two. The old Sportsman's Warehouse chrono said  236 to 241 over six shots.
Maybe they needed new batteries???
“The rifle itself has no moral stature, since it has no will of its own. Naturally, it may be used by evil men for evil purposes, but there are more good men than evil, and while the latter can not be persuaded to the path of righteousness by propaganda, they can certainly be corrected by good men with rifles.”

Col. Jeff Cooper

Offline Todd_ID

  • Trade Count: (+1)
  • Frontiersman
  • *****
  • Join Date: Apr 2008
  • Posts: 2926
  • Location: Clarkston
  • Hunt Hard!
Re: Lost Pinwheel User
« Reply #7 on: February 02, 2010, 08:53:24 AM »
I'd say that their chrono is more accurate than the software predictions we're offering here.  Mabye the draw weight is a little more than 60#?  Maybe the draw length is a bit longer than the modules say (quite common for a 30" module to be 30.75" draw, for example).  If you were using the software and massaging the input to match your stuff exactly, then I think the numbers would be much more precise.
Bring a GPS!  It's awkward to have to eat your buddies!

 


* Advertisement

* Recent Topics

Idaho Non-res hunt draw by trophyhunt
[Today at 08:07:31 AM]


Idaho Moose Tag Area 1-1 Hunt 3001 by MADMAX
[Today at 07:53:23 AM]


Ain’t it the truth!!😆😆😆😆 by wadu1
[Today at 07:40:28 AM]


Hunter bags 717 lb black bear by JakeLand
[Today at 06:58:29 AM]


Looking for Red Hot Replacement Muzzleloader Nipple 2 SKU: M900013 by HntnFsh
[Today at 06:41:27 AM]


Blue Tongue and EHD outbreak in NE Washington by hunter399
[Today at 06:13:12 AM]


2025 deer, let's see em! by Craig
[Today at 05:43:48 AM]


Whos going out for late muzzy Elk? by trophyhunt
[Yesterday at 10:33:49 PM]


Big J's Black Friday sale by trophyhunt
[Yesterday at 08:05:28 PM]


3 pintails by metlhead
[Yesterday at 07:54:28 PM]


King of the mountain caught sleeping by Rufous
[Yesterday at 07:52:52 PM]


Real world feedback needed: Rangefinder Binos by jeffro
[Yesterday at 07:52:05 PM]


Willipa Hills Antlerless tag by b0bbyg
[Yesterday at 07:42:48 PM]


Seekins PH3 by HUNT JR
[Yesterday at 07:31:55 PM]


121 Quality November 20-24 by erronulvin
[Yesterday at 06:52:55 PM]


Skyline by Brute
[Yesterday at 06:51:45 PM]


One of my Wowzhers by High Climber
[Yesterday at 06:47:52 PM]


Last Minute Light by MADMAX
[Yesterday at 06:12:55 PM]


Owl by HntnFsh
[Yesterday at 05:47:13 PM]


Mcnary snow by hdshot
[Yesterday at 05:21:13 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal