Hello all,
I have been putting a trail cam together using the sony homebrew posts that were on here about a year ago, most of the info. was from Bones, great info by the way. I have run into trouble. I have everything put together using a sony w90 and a yeti board, but when I test it the camera turns on but will not take a picture. The board is for a w80, but I believe this should also work for the w90. It takes picture if I manually short the shutter wire, and I have also used a small wire to short the contacts on the board and it will fire then as well. So far I have tried it with all dips off and with only number 6 on. Just wondering if anyone knows what my problem might be.
Thanks,
Ben