collapse

Advertisement


Author Topic: loads for 7mm08  (Read 7583 times)

Offline Thenewguy

  • Trade Count: (+2)
  • Longhunter
  • *****
  • Join Date: Sep 2008
  • Posts: 846
  • Location: Big Sky Country
  • Not the newest new guy
loads for 7mm08
« on: February 05, 2010, 04:06:29 PM »
Hey guys, anyone have any input on what grain to us? Any brands work better for you? I need to go pick up a bunch of rounds for my new sako coming in Monday. Thanks for the help!

Offline bobcat

  • Global Moderator
  • Trade Count: (+14)
  • Legend
  • *****
  • Join Date: Mar 2007
  • Posts: 39192
  • Location: Rochester
    • robert68
Re: loads for 7mm08
« Reply #1 on: February 05, 2010, 04:11:35 PM »
I don't have one but I'd use the same bullet and weight that I use in my 270, 140 grain Barnes TSX.

Offline hookr88

  • Non-Hunting Topics
  • Trade Count: (+1)
  • Sourdough
  • *****
  • Join Date: Feb 2009
  • Posts: 1088
  • Location: Issaquah
Re: loads for 7mm08
« Reply #2 on: February 05, 2010, 04:33:01 PM »
My son has done just fine with Remington CoreLokt in 140gr. in his Tikka T3. I am just getting ready to start reloading some rounds using Nosler partitions and Sierra's in various grains. We shall see.

Offline thinkingman

  • Trade Count: (+10)
  • Sourdough
  • *****
  • Join Date: Mar 2008
  • Posts: 2363
Re: loads for 7mm08
« Reply #3 on: February 05, 2010, 05:20:35 PM »
140gr is the standard, but for the all-copper constructed bullet, which tend to be long for weight, I'd consider 120's.
Do you have powder?
Varget is like the standard for the case, I use H414 and like the low temperature sensitivity, since it can be 90 or 15 when I'm shooting.
Good luck and keep us informed.
“The whole problem with the world is that fools and fanatics are always so certain of themselves, but wiser men so full of doubts.”
― Bertrand Russell

Offline bobcat

  • Global Moderator
  • Trade Count: (+14)
  • Legend
  • *****
  • Join Date: Mar 2007
  • Posts: 39192
  • Location: Rochester
    • robert68
Re: loads for 7mm08
« Reply #4 on: February 05, 2010, 05:56:02 PM »
thinkingman, you're right the 120's in an all copper bullet may be better than the 140. Higher velocity and more reliable expansion.

Offline Red Dawg

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Nov 2007
  • Posts: 1945
  • Location: Granger, WA
Re: loads for 7mm08
« Reply #5 on: February 05, 2010, 06:20:27 PM »
copper is for wire.  ;) Use 140gr accubond and back that up with some Rl 17 or IMR 4350.

Offline Jamieb

  • Past Sponsor
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Jun 2008
  • Posts: 1862
  • Location: Lacey,WA
Re: loads for 7mm08
« Reply #6 on: February 05, 2010, 06:39:55 PM »
I shoot 120gr. nosler balistic tips in mine. Nosler makes the 120 with a thicker jacket then the others in this caliber.
The other bullet thats shot well for me is the 120gr barnes tsx
Both bullets over 44.5 gr of RL-15 are running right about 3000 FPS.

Offline Huntbear

  • I am a BAD Kitteh
  • Washington For Wildlife
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Nov 2007
  • Posts: 9616
  • Location: Wandering Lost East of the Mountains
  • Y.A.R. Jester aka Smart Ass
    • http://www.facebook.com/profile.php?id=1236486665
Re: loads for 7mm08
« Reply #7 on: February 05, 2010, 07:15:29 PM »
140 gr Partitions pushed by Win. 760 powder.  Great load for anything around here.
By my honorable conduct as a hunter let me give a good example and teach new hunters principles of honor, so that each new generation can show respect for their god, other hunters and the animals, and enjoy the dignity of the hunt.

Calling an illegal alien an 'undocumented immigrant' is like calling a drug dealer an 'unlicensed pharmacist'.

Offline Thenewguy

  • Trade Count: (+2)
  • Longhunter
  • *****
  • Join Date: Sep 2008
  • Posts: 846
  • Location: Big Sky Country
  • Not the newest new guy
Re: loads for 7mm08
« Reply #8 on: February 06, 2010, 07:59:03 AM »
Thanks for all the great info, I think my wife is buying me the basic reloading supplies on my upcoming birthday =-). What would you guys recommend for "out of the box" shooting?
« Last Edit: February 07, 2010, 12:25:00 PM by bobcat »

Offline fremont

  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Jul 2007
  • Posts: 301
Re: loads for 7mm08
« Reply #9 on: February 06, 2010, 09:48:18 AM »
I've pretty much settled on the 140 Sierra Pro-Hunter (flatbase).  Over Varget, it's very accurate out of my M70 Featherweight.

Offline hillbilli

  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Jan 2010
  • Posts: 555
  • Location: whidbey island
  • NAVY CHIEF
Re: loads for 7mm08
« Reply #10 on: February 07, 2010, 12:23:54 PM »
for 150gr, 44gr w760
for 140gr, 45gr w760
 bull barrel rem m700.

Offline Huntbear

  • I am a BAD Kitteh
  • Washington For Wildlife
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Nov 2007
  • Posts: 9616
  • Location: Wandering Lost East of the Mountains
  • Y.A.R. Jester aka Smart Ass
    • http://www.facebook.com/profile.php?id=1236486665
Re: loads for 7mm08
« Reply #11 on: February 07, 2010, 01:32:30 PM »
Thanks for all the great info, I think my wife is buying me the basic reloading supplies on my upcoming birthday =-). What would you guys recommend for "out of the box" shooting?

Federal Fusion will kill anything you want to shoot with it, until you get your own loads worked up.  Very good ammo.
By my honorable conduct as a hunter let me give a good example and teach new hunters principles of honor, so that each new generation can show respect for their god, other hunters and the animals, and enjoy the dignity of the hunt.

Calling an illegal alien an 'undocumented immigrant' is like calling a drug dealer an 'unlicensed pharmacist'.

Offline carpsniperg2

  • Site Sponsor
  • Global Moderator
  • Trade Count: (+126)
  • Legend
  • *****
  • Join Date: Sep 2009
  • Posts: 31528
  • Location: Goldendale,WA
Re: loads for 7mm08
« Reply #12 on: February 07, 2010, 01:52:21 PM »
i shoot 44g of h380 with a combined technology bullet which is a ballistic silver tip 140 grains threw my weatherby cfp and my new r-25 in 7mm-08 both guns are driving tacks i am going to try some nosler partition as well later but my r-25 shot 2 groups .30 and .25 at 100 yards with those loads. 140 grains provides the best overall trajectory/energy and is much better than the 120 in that gun i use to think the 120 was the best until i put the same load with a 120 against a 140 on my ballistic software i have then energy and trajectory by the 140 blows the 120 out of the water.
Owner: SPLIT DIAMOND TACTICAL
Firearms/Transfers/Parts/Optics
2011 HW Head Competition Winner

Offline carpsniperg2

  • Site Sponsor
  • Global Moderator
  • Trade Count: (+126)
  • Legend
  • *****
  • Join Date: Sep 2009
  • Posts: 31528
  • Location: Goldendale,WA
Re: loads for 7mm08
« Reply #13 on: February 07, 2010, 01:58:17 PM »
also for factory ammo the winchester ballistic tip ammo that you can buy at most sporting good stores is the same c/t silver tip that i am loading in the above load and i bought 2 boxes for my pistol when i had not got my componets yet and they shot very very good for factory ammo.
Owner: SPLIT DIAMOND TACTICAL
Firearms/Transfers/Parts/Optics
2011 HW Head Competition Winner

Offline Huntbear

  • I am a BAD Kitteh
  • Washington For Wildlife
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Nov 2007
  • Posts: 9616
  • Location: Wandering Lost East of the Mountains
  • Y.A.R. Jester aka Smart Ass
    • http://www.facebook.com/profile.php?id=1236486665
Re: loads for 7mm08
« Reply #14 on: February 07, 2010, 02:11:51 PM »
i shoot 44g of h380 with a combined technology bullet which is a ballistic silver tip 140 grains threw my weatherby cfp and my new r-25 in 7mm-08 both guns are driving tacks i am going to try some nosler partition as well later but my r-25 shot 2 groups .30 and .25 at 100 yards with those loads. 140 grains provides the best overall trajectory/energy and is much better than the 120 in that gun i use to think the 120 was the best until i put the same load with a 120 against a 140 on my ballistic software i have then energy and trajectory by the 140 blows the 120 out of the water.

I found the same results using the 140 gr. bullets.  Better trajectory, more energy down range.  I am using both Partitions and Ballistic Tips, both with great results.  I hunt with the Partitions, since I may stumble into a bear, not likely with my luck, but one never knows.
By my honorable conduct as a hunter let me give a good example and teach new hunters principles of honor, so that each new generation can show respect for their god, other hunters and the animals, and enjoy the dignity of the hunt.

Calling an illegal alien an 'undocumented immigrant' is like calling a drug dealer an 'unlicensed pharmacist'.

Offline runamuk

  • Trade Count: (+1)
  • Explorer
  • ******
  • Join Date: Jan 2008
  • Posts: 17878
Re: loads for 7mm08
« Reply #15 on: February 07, 2010, 05:37:03 PM »
Thanks for all the great info, I think my wife is buying me the basic reloading supplies on my upcoming birthday =-). What would you guys recommend for "out of the box" shooting?

Federal Fusion will kill anything you want to shoot with it, until you get your own loads worked up.  Very good ammo.

fusion shoots fine out of mine, handloads shoot better but the fusion works.

 


* Advertisement

* Recent Topics

Who’s walleye fishing? by dreamingbig
[Yesterday at 10:36:59 PM]


Norway pass Elk by moocher97
[Yesterday at 10:32:52 PM]


I’m on a blacktail mission by Turner89
[Yesterday at 10:03:24 PM]


Selkirk bull moose. by Turner89
[Yesterday at 09:58:53 PM]


Colockum Archery Bull Tag by oldleclercrd
[Yesterday at 09:10:44 PM]


Anybody hunt with a 25 Creedmoor? by jjhunter
[Yesterday at 08:01:10 PM]


Fun little Winchester 1890 project by JDHasty
[Yesterday at 08:00:51 PM]


VA Loan Closing Costs by pianoman9701
[Yesterday at 07:21:46 PM]


2025 NWTF Jakes Day by wadu1
[Yesterday at 07:04:31 PM]


September mule deer velvet by erronulvin
[Yesterday at 05:10:22 PM]


Colorado Results by hookr88
[Yesterday at 04:04:40 PM]


Mudflow Archery by Rugergunsite308
[Yesterday at 03:21:25 PM]


Fishing in the tri cities area by metlhead
[Yesterday at 03:08:35 PM]


DR Brush Mower won't crank by EnglishSetter
[Yesterday at 02:31:19 PM]


Mason County Youth Buck Nov 1-16 by ASHQUACK
[Yesterday at 02:18:39 PM]


Swakane Ram by hillbillyhunting
[Yesterday at 12:21:34 PM]


Rimrock Bull: Modern by zagsfan1
[Yesterday at 11:00:13 AM]


Sportsman Alliance files petition to Gov Ferguson for removal of corrupt WA Wildlife Commissioners by dreamingbig
[Yesterday at 10:44:31 AM]


Getting back into dogs by Machias
[Yesterday at 10:40:03 AM]


After a couple years of poor health,... by Skillet
[Yesterday at 08:49:46 AM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal