Sony Homebrew help

[yousowise]

Hello all,
I have been putting a trail cam together using the sony homebrew posts that were on here about a year ago, most of the info. was from Bones, great info by the way.  I have run into trouble.  I have everything put together using a sony w90 and a yeti board, but when I test it the camera turns on but will not take a picture.  The board is for a w80, but I believe this should also work for the w90.  It takes picture if I manually short the shutter wire, and I have also used a small wire to short the contacts on the board and it will fire then as well.  So far I have tried it with all dips off and with only number 6 on.  Just wondering if anyone knows what my problem might be.
Thanks,
Ben

[Grizzly95]

Have you let it go through the arming proccess? This usually takes I think 30 seconds. Any movement it senses delays the arming time. I have built 3 of them now. Where are you located?

[yousowise]

Yeah I am pretty sure it had gone through the arming time.  I messed with some of the switch's and then put them all back to off.  I really didn't change anything else but it is now taking pictures.  I spent a couple hours dinking around with it and I still don't know why it didn't work to begin with.  The multiple picture mode still doesn't look like it is working though, it will take 1 pic and stays on for a little longer and then powers down without taking a 2nd pic., then if there is still movement after the delay it will power back up and take another single pic.  I Am just glad that it is now working, kind of.  What switches do you normally have on when the camera is out in the field?
Thanks,
Ben

Oh I am in Clarkston, I am actually headed up tomorrow to see some family and will work mon. and tues. doing some fill in work in Deer Park.

[Skyvalhunter]

try changing the wires around where they hook up to the Yeti board.