Free: Contests & Raffles.
a few companies make speed loaders for muzzle loaders. Typically one speed loader carries bullet, pre-measured powder, and cap. I don't put the cap in mine as I carry a thompson center speed capper around my neck or in my pocket.procedure open top of speed loader - dump powder. flip it over and use ramrod to push bullet and sabot down through plastic speed loader. make sure bullet is seated, cap, take aim, fire and repeat.I put 5 - 6 speed loaders in a shotgun shell holder on the stock, and all the accessories including, cleaning jag, patches, lube, cleaning solvent, tools, extra breech plug and nipple, powder, and bullets, and such in my day pack. More powder and bullets included in this mess, because as i typically lose a speed loader or two through out the season. disclosure - speed loaders and muzzleloaders need to be unloaded and cleaned frequently as they collect condensation, and moisture from outside, and sometimes will end up with wet powder and no - "boom"This is the same way I do my follow up reloading but instead of having it on my stock, I just have them hanging at my hip. All my stuff is premeasured and ready to roll. My old man and I shot alot at the range to get ready but if you have a place where you can go shoot by yourself I would recommend doing that so you can practice shooting, then trying to reload quickly for a follow up shot. Word of advice though, muzzleloaders get dirty quickly so be ready to clean it after every shot or two.