collapse

Advertisement


Author Topic: Bedding a Rifle?  (Read 8765 times)

Offline Antlershed

  • Trade Count: (+8)
  • Frontiersman
  • *****
  • Join Date: Jul 2007
  • Posts: 4836
  • Location: Olympia, WA
Re: Bedding a Rifle?
« Reply #15 on: March 06, 2008, 10:03:43 PM »
have you messed with the action screws, it is possible to bind the action if you torque them incorrectly. also the scope rings/bases should have some attenition.


when was the last time you cleaned the rifle.......well.
I had to take the action out of the stock in order to adjust the trigger, maybe I messed them up then, but it didn't shoot well before that. I've cleaned it well numerous times. This has been an ongoing issue for quite some time.

Offline Coasthunterjay

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Aug 2007
  • Posts: 1749
Re: Bedding a Rifle?
« Reply #16 on: March 10, 2008, 06:03:14 PM »
So if you have a regular wooden stock can you float your barrel yourself and with out using a resin bedding? Is it as easy as sanding the Inside of the stock(forward end) untill you could put a dollar bill between the stock and the barrel? Or is it harder than that?

Offline jackelope

  • Administrator
  • Trade Count: (+29)
  • Legend
  • *****
  • Join Date: Mar 2007
  • Posts: 50717
  • Location: Duvall, WA
  • Groups: jackelope
Re: Bedding a Rifle?
« Reply #17 on: March 10, 2008, 09:50:35 PM »
Quote
Is it as easy as sanding the Inside of the stock(forward end) untill you could put a dollar bill between the stock and the barrel?

pert near.
"Hate speech does not exist legally in America. There's ugly speech. There's gross speech. There's evil speech. And ALL of it is protected by the First Amendment."

Offline Antlershed

  • Trade Count: (+8)
  • Frontiersman
  • *****
  • Join Date: Jul 2007
  • Posts: 4836
  • Location: Olympia, WA
Re: Bedding a Rifle?
« Reply #18 on: March 20, 2008, 06:45:50 PM »
Bringing this back up cause I am still messing with the rifle. Is it correct that you want to torque down the front action screw first and then tighten the rear one?

Offline high country

  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: May 2007
  • Posts: 5133
Re: Bedding a Rifle?
« Reply #19 on: March 20, 2008, 07:13:17 PM »
yes. snug up the front screw first, then the rear. the rear should not be too super tight.

Offline DHB

  • Trade Count: (+2)
  • Pilgrim
  • *
  • Join Date: Feb 2008
  • Posts: 18
  • Location: SE WA
  • Born Again Christian
Re: Bedding a Rifle?
« Reply #20 on: March 24, 2008, 01:29:27 PM »
You should tighten them alternately until just snug and then tighten the front real snug and the back almost. On rifles with a middle screw it should just be in there, not tight!!
In other words don't sock down the front and the rear still be way loose.


Offline MountainWalk

  • "Pa Nevermissashot"
  • Political & Covid-19 Topics
  • Trade Count: (+1)
  • Frontiersman
  • *****
  • Join Date: Mar 2008
  • Posts: 3083
  • Location: Afognak, POW, Kodiak, Quilcene
  • High lead logger/ cutter
Re: Bedding a Rifle?
« Reply #21 on: March 24, 2008, 02:07:24 PM »
you using weaver mounts with the cross bolt ,, or a good solid dovetail mount?...my dang m70 270 sm  from wal mart came with weaver styles.. it shot good ,, for while,,,, i was getting pissed,, then i looked at all my other rifles and noticed i put good mounts on all of them..... i took the weaver base,, and seen where the alum.. was peening and shearing away...put the luepold bases on.. not a problem since.
The way that you wander, is the way that you choose
The day that you tarry, is the day that you lose

Offline Antlershed

  • Trade Count: (+8)
  • Frontiersman
  • *****
  • Join Date: Jul 2007
  • Posts: 4836
  • Location: Olympia, WA
Re: Bedding a Rifle?
« Reply #22 on: March 24, 2008, 04:05:23 PM »
Leupold rings and bases. The rear is the "clamp" style.

 


* Advertisement

* Recent Topics

Hancock/Manulife........No Trespassing signs everywhere! What's the deal. by TommyH
[Today at 07:44:20 AM]


2025 deer, let's see em! by HntnFsh
[Today at 06:46:18 AM]


Bearpaw Season 2025 by bearpaw
[Today at 06:17:35 AM]


Entiat Modern hunting by Lapua338
[Today at 06:09:20 AM]


Big buck, bad eye by 2MANY
[Today at 05:44:31 AM]


Idaho on the verge of outlawing by 2MANY
[Today at 05:42:17 AM]


As He Lay by dreadi
[Today at 01:20:44 AM]


2025 elk success thread!! by Westsideelkchaser
[Today at 12:14:14 AM]


Piebald blacktail fawn by Bearhunter308
[Yesterday at 10:43:03 PM]


Restraining Order to Prevent Sherman Wolf Removal by Roslyn Rambler
[Yesterday at 10:12:29 PM]


Cougar and an elk same pic/video by redi
[Yesterday at 08:52:46 PM]


2025 blacktail rut thread by trophyhunt
[Yesterday at 07:48:21 PM]


Flynn’s 1st rooster!!! by Tafinder
[Yesterday at 06:19:07 PM]


Moose's 2025 Upland Season by bighorns2bushytails
[Yesterday at 03:41:51 PM]


Chasing wild chickens. by goldenhtr
[Yesterday at 02:53:31 PM]


Hunting w/ 30 rd magazine by jackelope
[Yesterday at 02:16:17 PM]


CITES hide sealer and Fur Harvesters Receiving Agent info Pt 1 by Loup Loup
[Yesterday at 08:35:28 AM]


Color phase fox by Loup Loup
[Yesterday at 08:32:56 AM]


Mt. St. Helens Goat by fishngamereaper
[Yesterday at 08:19:02 AM]


GM 6.6l gas 6 speed vs. 10 speed? by fishngamereaper
[Yesterday at 08:18:03 AM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal