collapse

Advertisement


Author Topic: Bedding a Rifle?  (Read 8522 times)

Offline Antlershed

  • Trade Count: (+8)
  • Frontiersman
  • *****
  • Join Date: Jul 2007
  • Posts: 4822
  • Location: Olympia, WA
Re: Bedding a Rifle?
« Reply #15 on: March 06, 2008, 10:03:43 PM »
have you messed with the action screws, it is possible to bind the action if you torque them incorrectly. also the scope rings/bases should have some attenition.


when was the last time you cleaned the rifle.......well.
I had to take the action out of the stock in order to adjust the trigger, maybe I messed them up then, but it didn't shoot well before that. I've cleaned it well numerous times. This has been an ongoing issue for quite some time.

Offline Coasthunterjay

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Aug 2007
  • Posts: 1749
Re: Bedding a Rifle?
« Reply #16 on: March 10, 2008, 06:03:14 PM »
So if you have a regular wooden stock can you float your barrel yourself and with out using a resin bedding? Is it as easy as sanding the Inside of the stock(forward end) untill you could put a dollar bill between the stock and the barrel? Or is it harder than that?

Offline jackelope

  • Administrator
  • Trade Count: (+29)
  • Legend
  • *****
  • Join Date: Mar 2007
  • Posts: 50344
  • Location: Duvall, WA
  • Groups: jackelope
Re: Bedding a Rifle?
« Reply #17 on: March 10, 2008, 09:50:35 PM »
Quote
Is it as easy as sanding the Inside of the stock(forward end) untill you could put a dollar bill between the stock and the barrel?

pert near.
:fire.:

" In today's instant gratification society, more and more pressure revolves around success and the measurement of one's prowess as a hunter by inches on a score chart or field photos produced on social media. Don't fall into the trap. Hunting is-and always will be- about the hunt, the adventure, the views, and time spent with close friends and family. " Ryan Hatfield

My posts, opinions and statements do not represent those of this forum

Offline Antlershed

  • Trade Count: (+8)
  • Frontiersman
  • *****
  • Join Date: Jul 2007
  • Posts: 4822
  • Location: Olympia, WA
Re: Bedding a Rifle?
« Reply #18 on: March 20, 2008, 06:45:50 PM »
Bringing this back up cause I am still messing with the rifle. Is it correct that you want to torque down the front action screw first and then tighten the rear one?

Offline high country

  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: May 2007
  • Posts: 5133
Re: Bedding a Rifle?
« Reply #19 on: March 20, 2008, 07:13:17 PM »
yes. snug up the front screw first, then the rear. the rear should not be too super tight.

Offline DHB

  • Trade Count: (+2)
  • Pilgrim
  • *
  • Join Date: Feb 2008
  • Posts: 15
  • Location: SE WA
  • Born Again Christian
Re: Bedding a Rifle?
« Reply #20 on: March 24, 2008, 01:29:27 PM »
You should tighten them alternately until just snug and then tighten the front real snug and the back almost. On rifles with a middle screw it should just be in there, not tight!!
In other words don't sock down the front and the rear still be way loose.


Offline MountainWalk

  • "Pa Nevermissashot"
  • Political & Covid-19 Topics
  • Trade Count: (+1)
  • Frontiersman
  • *****
  • Join Date: Mar 2008
  • Posts: 3083
  • Location: Afognak, POW, Kodiak, Quilcene
  • High lead logger/ cutter
Re: Bedding a Rifle?
« Reply #21 on: March 24, 2008, 02:07:24 PM »
you using weaver mounts with the cross bolt ,, or a good solid dovetail mount?...my dang m70 270 sm  from wal mart came with weaver styles.. it shot good ,, for while,,,, i was getting pissed,, then i looked at all my other rifles and noticed i put good mounts on all of them..... i took the weaver base,, and seen where the alum.. was peening and shearing away...put the luepold bases on.. not a problem since.
The way that you wander, is the way that you choose
The day that you tarry, is the day that you lose

Offline Antlershed

  • Trade Count: (+8)
  • Frontiersman
  • *****
  • Join Date: Jul 2007
  • Posts: 4822
  • Location: Olympia, WA
Re: Bedding a Rifle?
« Reply #22 on: March 24, 2008, 04:05:23 PM »
Leupold rings and bases. The rear is the "clamp" style.

 


* Advertisement

* Recent Topics

HUNTNNW 2025 trail cam thread and photos by HUNTINCOUPLE
[Today at 08:07:55 PM]


Teanaway bull elk by teanawayslayer
[Today at 05:57:24 PM]


Also looking for help deciding on a scope by Sakko300wsm
[Today at 05:49:13 PM]


6mm Creedmoor Gauges by pickardjw
[Today at 01:27:28 PM]


Brittany breeders by ghosthunter
[Today at 01:17:23 PM]


Kings by metlhead
[Today at 12:37:26 PM]


Fullsized Truck Opinion: HiMiNew vs LoMiOlder by rainshadow1
[Today at 11:46:04 AM]


AKC lab puppies! Born 06/10/2025 follow as they grow!!! by scottfrick
[Today at 11:29:22 AM]


AUCTION: SE Idaho DIY Deer or Deer/Elk Hunt by Karl Blanchard
[Today at 10:47:28 AM]


Looking for Solid 22 LR input by C-Money
[Today at 07:52:53 AM]


Velvet by MADMAX
[Yesterday at 07:35:16 PM]


Advice for a first time Bear spot and stalk? by Crunchy
[Yesterday at 06:02:28 PM]


2025 Canning by Twispriver
[Yesterday at 05:00:03 PM]


WSTA 2025 Summer Rendezvous Agenda by Humptulips
[Yesterday at 03:09:35 PM]


2025 Montana alternate list by JBar
[Yesterday at 02:20:40 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal