collapse

Advertisement


Author Topic: Back to the drawing board...................  (Read 5826 times)

Offline Sagedawg

  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Nov 2007
  • Posts: 657
  • Location: Spokane
Back to the drawing board...................
« on: March 12, 2008, 07:50:06 AM »
Well finally got out shooting this week end. Was wanting to work up a load with the Dead Center bullets all with no luck. Started out with 90grs of 777 and a 310 grain bullet.......accuracy sucked dropped down to 85grs  same story. I went back to the tried and true knight sabot under 100grs of 777 and Im right back to a 2-1/2''group at 100 yards. I think Ill just stick to what works. Just wanted to pass the info on. Hope this helps someone.


Sage

Offline wastickslinger

  • Trade Count: (+1)
  • Frontiersman
  • *****
  • Join Date: Aug 2007
  • Posts: 2863
  • Location: pluto
Re: Back to the drawing board...................
« Reply #1 on: March 12, 2008, 08:16:32 AM »
2 1/2 inch group at 100 yards with an iron sight smokepole doesn't sound like a problem to me. That would mean 4-6 inch group at your max range. I have never been able to get a tighter group than that with an open sight muzzleloader and I get er done.  :dunno: just my 2 cents.

Offline actionshooter

  • Past Sponsor
  • Trade Count: (+6)
  • Old Salt
  • *****
  • Join Date: Apr 2007
  • Posts: 6063
  • Location: Olympia/Okanogan
    • https://www.instagram.com/steve.bell.actionshooter/
Re: Back to the drawing board...................
« Reply #2 on: March 14, 2008, 05:10:20 PM »
I don't know what kind of rifle your shooting but the knight 310 gr sabots are the best I have ever found for accuracy in a Knight rifle.

Offline Sagedawg

  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Nov 2007
  • Posts: 657
  • Location: Spokane
Re: Back to the drawing board...................
« Reply #3 on: March 14, 2008, 06:31:18 PM »
 I shoot a Knight Bighorn. I didnt mean to come across like I had to get better groups. I was just wanting to see what the Dead Center loads were capable of. My gun didnt really care for them ,like you  my most accurate loads are with the Knight sabot. I do this all the time, get somethiung that works and then I try to go out and re-invent the wheel. Most be my wife rubbing off on me   LOL.


Sage

Offline DBake

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Sep 2007
  • Posts: 237
Re: Back to the drawing board...................
« Reply #4 on: March 17, 2008, 12:56:13 PM »
Any of you shooting/tired Hornady Great Plains?

Slenk

  • Guest
Re: Back to the drawing board...................
« Reply #5 on: March 17, 2008, 01:11:50 PM »
Yup !
The only bullet that I shoot . They DO kill Elk.
Mostly shoot round ball though.
Slenk

Offline actionshooter

  • Past Sponsor
  • Trade Count: (+6)
  • Old Salt
  • *****
  • Join Date: Apr 2007
  • Posts: 6063
  • Location: Olympia/Okanogan
    • https://www.instagram.com/steve.bell.actionshooter/
Re: Back to the drawing board...................
« Reply #6 on: March 17, 2008, 03:51:51 PM »
Any of you shooting/tired Hornady Great Plains?
I've shot them a bunch, my 2nd choice

 


* Advertisement

* Recent Topics

Power bait secrets......send it by ASHQUACK
[Today at 08:27:03 AM]


2027 Pink Run Destroyed by Bareback
[Today at 08:26:10 AM]


Idaho on the verge of outlawing by huntnnw
[Today at 08:12:29 AM]


Leopard Cur Pups by TeacherMan
[Today at 08:11:35 AM]


Local knife makers ? by HntnFsh
[Today at 07:25:57 AM]


Idaho's new Deer/Elk License System by Chesapeake
[Today at 07:12:11 AM]


Idaho Trapping Journal 2025/26 by TeacherMan
[Today at 06:36:07 AM]


Midwest Whitetails by nwwanderer
[Today at 06:05:23 AM]


GO 2025 15th Annual Hunting-Washington Christmas Gift Exchange by Ghost Hunter
[Today at 05:42:50 AM]


My Kansas 2025 Buck by Turner89
[Yesterday at 07:21:46 PM]


2025 blacktail rut thread by Mfowl
[Yesterday at 06:41:15 PM]


Curvy Damascus Utility Fighter by teanawayslayer
[Yesterday at 04:29:20 PM]


In the background by Ricochet
[Yesterday at 04:23:52 PM]


Lion Down - the Savor of Success by Pathfinder101
[Yesterday at 03:26:41 PM]


Big J's Barn sale / Drawing by BigJs Outdoor Store
[Yesterday at 03:07:57 PM]


Swakane by blackveltbowhunter
[Yesterday at 02:04:52 PM]


What A Waste - Moose Poached in ID by WA hunters by Rainier10
[Yesterday at 01:59:09 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal