collapse

Advertisement


Author Topic: Factory elk loads  (Read 5256 times)

Offline Hornseeker

  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Dec 2007
  • Posts: 3097
    • Sapphire Traditional Archery
Re: Factory elk loads
« Reply #15 on: September 16, 2010, 02:11:25 PM »
With good shot selection ANY bullet will work from a 243 up... But I myself shoot Barnes TSX's...that way if its a huge bull and I dont have a great angle, I can drive it to the vitals from any direction....period. MANY, MANY good premium bullets in factory ammo nowadays...

Id say...invest a few hundred dollars and start reloading.
Chuck Norris puts the "Laughter" in "Manslaughter"

Offline Bofire

  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Old Salt
  • ******
  • Join Date: Oct 2007
  • Posts: 5524
  • Location: Yelm
  • Harley YAR YAR YAR!
Re: Factory elk loads
« Reply #16 on: September 16, 2010, 04:07:41 PM »
 :)Every elk I have killed with a hunting rifle, over 20, have had an exit hole, even the first one with a 30-30. I killed 7 with 7 shots in 1972 with a 222, none went over 20 feet. Before you get your panties in a wad, I worked for the Game and Fish and was on a long term nuisance call.
Carl
When the chips are down..... the buffalo is empty!!

I do not shop at Amazon

Offline fremont

  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Jul 2007
  • Posts: 301
Re: Factory elk loads
« Reply #17 on: September 16, 2010, 07:45:11 PM »
+1 Core-Lokt

Offline Jburke

  • Non-Hunting Topics
  • Trade Count: (+3)
  • Sourdough
  • *****
  • Join Date: Mar 2008
  • Posts: 1387
  • Location: Spokane
Re: Factory elk loads
« Reply #18 on: September 17, 2010, 12:38:13 AM »
Oops, my bad.  I'm shooting an 06, but I think I probably have all the answers I needed.  I have some ammo that should work, but was just wondering about going through bone with them.  Hitting the shoulder and what not. 

Offline Hornseeker

  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Dec 2007
  • Posts: 3097
    • Sapphire Traditional Archery
Re: Factory elk loads
« Reply #19 on: September 17, 2010, 07:07:31 AM »
Hitting the shoulder, driving into the vitals on a quartering-to shot... or hitting vitals with a hard quartering-away shot, is where the good bullets with lots of Ooooomph behind them will pay off.....

Bofire.... that would be some fun chit.... for a while anyway! I have a buddy that has a buddy that kills problem Griz in Wyoming...  :rockin:

:mgun:
Chuck Norris puts the "Laughter" in "Manslaughter"

Offline thinkingman

  • Trade Count: (+10)
  • Sourdough
  • *****
  • Join Date: Mar 2008
  • Posts: 2363
Re: Factory elk loads
« Reply #20 on: September 17, 2010, 08:38:39 AM »
I would focus on a bullet that has a partition or solid.  Federal used to make a Trophy Bonded BearClaw they called H.E.(high energy).  Closed to 3000fps with a sledgehammer bullet.
Today, I'd look for Barnes TSX bullets in that loading.
I agree that Corelokt is a deer bullet, not elk, and yes, elk have been dying for years but they've also run away with bullet holes and died someplace else for years.
Let's not start this debate again.
“The whole problem with the world is that fools and fanatics are always so certain of themselves, but wiser men so full of doubts.”
― Bertrand Russell

Offline GoldTip

  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Jul 2007
  • Posts: 4588
  • Location: Spokane, WA
Re: Factory elk loads
« Reply #21 on: September 17, 2010, 09:13:56 AM »
I would focus on a bullet that has a partition or solid.  Federal used to make a Trophy Bonded BearClaw they called H.E.(high energy).  Closed to 3000fps with a sledgehammer bullet.
Today, I'd look for Barnes TSX bullets in that loading.
I agree that Corelokt is a deer bullet, not elk, and yes, elk have been dying for years but they've also run away with bullet holes and died someplace else for years.
Let's not start this debate again.

Ok no debating, I've killed multiple elk with premium bullets and multiple elk with Corelokts.  Double shouldered most of the elk with either bullet, none of them have come back from the dead, the last elk I had to shoot twice was shot with a premium bullet (handloaded swift scirocco) that took out both front shoulders and rested under the hide on the far side, he was still trying to get up and I didn't want him to suffer.  While I agree a premium bullet gives you that extra confidence factor that your bullet won't come aprt.  I would venture a guess that more elk have run off with a bullet whole in the ass due to people shooting "premium" bullets that will drive "lengthways" thru an elk smashing everything in it's path, then have ran off with a 180gr '06 core loft to the shoulder.
I didn't say it was your fault, I said I was blaming you.
If I ageed with you, then we'd both be wrong.
You are never to old to learn something stupid.

Offline Skinnyman

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Jun 2009
  • Posts: 145
  • Location: Steilacoom
Re: Factory elk loads
« Reply #22 on: September 17, 2010, 10:16:09 AM »
My vote is Barnes TSX or nosler Partition. Elk are much thicker boned than their smaller cousin the deer. Just nice to have one of these bullets if your shot hits their thick shoulder bone. I use the TTSX (Tipped TSX), I hunt with a 338 WM.

Offline SkookumHntr

  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Aug 2007
  • Posts: 2917
  • Location: Tono, WA
Re: Factory elk loads
« Reply #23 on: September 17, 2010, 10:23:53 AM »
-Nosler Particion's have always worked well for me.
IBEW89 RMEF MDF CCA

Offline highmuley

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Sep 2010
  • Posts: 615
  • Location: Republic
Re: Factory elk loads
« Reply #24 on: September 17, 2010, 10:34:07 AM »
I use federal brand loaded with Barnes bullets (30-06 180gr and .308 150gr). I have never had an animal leave its feet. 100% weight retention. Excellent down range kinetic energy, great terminal performance. Just my opinion
Its the goin'.....Not the gettin'

Offline robmill70

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Sep 2010
  • Posts: 36
  • Location: Graham
Re: Factory elk loads
« Reply #25 on: September 17, 2010, 04:55:30 PM »
I like the nosler partition (took an Elk with my 257 Weatherby, 120gr Nosler Partition), but I have used core lokt for years and NEVER had any problems....like some have said, it's about making a good shot.  :twocents:

 


* Advertisement

* Recent Topics

How is late season whitetail hunting? Good, bad, decent? GMU 105/117? by WoodHacker
[Today at 10:56:33 AM]


Roosevelt Elk. Please nudge me in the right direction. I feel hopeless. by Badsmerf
[Today at 10:41:36 AM]


Multi season elk by Sundance
[Today at 10:39:42 AM]


High end binocs by Snakeriver
[Today at 10:12:09 AM]


Any MT deer updates? by Tbob
[Today at 10:09:28 AM]


Guidance to hunting new area by MADMAX
[Today at 09:50:56 AM]


WTS: reloading components by Smkn_brl00
[Today at 09:43:03 AM]


RRS Lever Release Clamp for Ball Head by pickardjw
[Today at 08:15:33 AM]


Taneum Elk Cow tag problem by Ewoiwod
[Today at 08:12:32 AM]


My Wenaha bull by Gonehuntin01
[Today at 08:08:05 AM]


BNSF Land Access by Sandberm
[Today at 06:58:18 AM]


Slide Ridge Quality tag holders by Britt-dog
[Today at 06:09:06 AM]


2025 elk success thread!! by jeffitz
[Today at 04:04:14 AM]


My Entiat Late tag thread by scottfrick
[Yesterday at 10:15:40 PM]


Stevens double barrel 410 by scotsman
[Yesterday at 09:39:58 PM]


Xlr element vs mdt hnt26 by dmoua
[Yesterday at 09:30:35 PM]


2025 blacktail rut thread by HntnFsh
[Yesterday at 08:55:39 PM]


East Side Quail Numbers? by Goshawk
[Yesterday at 08:55:20 PM]


Hunting late season, where would you go? by kodiak06
[Yesterday at 07:43:16 PM]


Late Season archery elk by jason stevens
[Yesterday at 06:26:12 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal