collapse

Advertisement


Author Topic: 300wsm loads  (Read 8023 times)

Offline jared78

  • Trade Count: (0)
  • Pilgrim
  • *
  • Join Date: May 2009
  • Posts: 4
300wsm loads
« on: May 09, 2011, 08:12:59 AM »
I just bought a tikka t3 in 300wsm and was hoping you guys could help me out with some load options.  I think I want to use the berger 185 hunting vlds but any info you could give would be greatly appreciated (powder, primers, oal etc..).  thanks for the help.

Offline thinkingman

  • Trade Count: (+10)
  • Sourdough
  • *****
  • Join Date: Mar 2008
  • Posts: 2363
Re: 300wsm loads
« Reply #1 on: May 09, 2011, 09:44:43 AM »
Your limitation will be the magazine.
Tikka's are usually long-throated and your chamber will accept a longer OAL than the mag.
You will need to test some empty casing/bullet combos and I would load at the max of your magazine.
In re Berger VLD's, I have not used them.
My favorite bullet for that cartridge (most cartridges!) is Barnes TSX...180 or 168.
They're long-for-weight, being all-copper and they are very accurate.
For powder, I use H-414 but have never gotten close to book velocities..usually around 4-5% under published velocity.
“The whole problem with the world is that fools and fanatics are always so certain of themselves, but wiser men so full of doubts.”
― Bertrand Russell

Offline KillBilly

  • Trade Count: (+2)
  • Frontiersman
  • *****
  • Join Date: May 2007
  • Posts: 3667
  • Location: OLY, WA.
  • I kill therefore I Am
Re: 300wsm loads
« Reply #2 on: May 09, 2011, 11:32:10 AM »
I use the Nosler Accubonds in my Tikka 300 WSM and it loves them.
Some people spend their entire life wondering if they made a difference. Marines don't have that problem.
He who shed blood with me shall forever be my brother.

Offline MDGrand

  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Apr 2010
  • Posts: 722
Re: 300wsm loads
« Reply #3 on: May 09, 2011, 12:55:46 PM »
Here is my load and results for Berger 185 VLD out of my Vanguard 300WSM Sub MOA:

Winchester Nickle Plated Brass
Federal GMM215 primer
IMR 4350 60.4 grains (max)
OAL = 2.88 (-0.02 from the lands) Bergers like to be seated close to the lands, so get an OAL gauge and find out.

Good luck!

Offline jared78

  • Trade Count: (0)
  • Pilgrim
  • *
  • Join Date: May 2009
  • Posts: 4
Re: 300wsm loads
« Reply #4 on: May 09, 2011, 09:20:01 PM »
thanks guys,  I really appreciate the help.  Anyone uses imr 4831?  I'v got imr 4350, reloader 22 and imr 4831.  any opinions on the 4831?  thanks again.

Offline KNOPHISH

  • Political & Covid-19 Topics
  • Trade Count: (+6)
  • Sourdough
  • *****
  • Join Date: May 2008
  • Posts: 1567
  • Location: Auburn
Re: 300wsm loads
« Reply #5 on: May 10, 2011, 06:02:32 AM »
I have the 180 Accubonds dialed in with H4831sc & RL17 for my 300wsm.
I have Man Chit to do

Offline Huntbear

  • I am a BAD Kitteh
  • Washington For Wildlife
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Nov 2007
  • Posts: 9616
  • Location: Wandering Lost East of the Mountains
  • Y.A.R. Jester aka Smart Ass
    • http://www.facebook.com/profile.php?id=1236486665
Re: 300wsm loads
« Reply #6 on: May 10, 2011, 06:43:10 AM »
the loads I worked up for my brother's 300 wsm .


165 gr. Nosler partition

near max load of Magpro

CCI Mag Rifle Primer

He is shooting a BAR, getting 9/16 in groups at 100 yds. with that load.
By my honorable conduct as a hunter let me give a good example and teach new hunters principles of honor, so that each new generation can show respect for their god, other hunters and the animals, and enjoy the dignity of the hunt.

Calling an illegal alien an 'undocumented immigrant' is like calling a drug dealer an 'unlicensed pharmacist'.

Offline JKEEN33

  • Trade Count: (+9)
  • Longhunter
  • *****
  • Join Date: Apr 2010
  • Posts: 959
Re: 300wsm loads
« Reply #7 on: May 10, 2011, 04:09:33 PM »
thanks guys,  I really appreciate the help.  Anyone uses imr 4831?  I'v got imr 4350, reloader 22 and imr 4831.  any opinions on the 4831?  thanks again.

IMR 4831 and 4350 are both great powders for the 300WSM.

 


* Advertisement

* Recent Topics

Selkirk bull moose. by Turner89
[Today at 10:32:00 PM]


My Brothers First Blacktail by Turner89
[Today at 09:54:22 PM]


Survey in ? by metlhead
[Today at 09:44:06 PM]


Public Land Sale Senate Budget Reconciliation by Skillet
[Today at 09:21:24 PM]


Knotty duck decoys by Klickitatsteelie
[Today at 08:48:12 PM]


North Dakota by hdshot
[Today at 08:31:31 PM]


Mudflow Archery by Elkay
[Today at 08:31:30 PM]


Norway Pass Bull by SkookumHntr
[Today at 08:06:26 PM]


Steens Youth Buck tag by Boss .300 winmag
[Today at 07:44:54 PM]


wyoming pronghorn draw by Ridgerunner
[Today at 07:44:54 PM]


Buying pheasants for training by pbg
[Today at 06:33:17 PM]


Pack mules/llamas by teanawayslayer
[Today at 06:19:02 PM]


Early Huckleberry Bull Moose tag drawn! by hunter399
[Today at 04:46:15 PM]


Another great day in the turkey woods. by rosscrazyelk
[Today at 03:53:50 PM]


Grayback Youth Hunt by Deer slayer
[Today at 03:30:57 PM]


gmu 636 elk hunt by eastfork
[Today at 02:01:27 PM]


Little Natchez cow elk by CarbonHunter
[Today at 11:00:47 AM]


2025 OILS! by Cspahman99
[Today at 09:41:04 AM]


Canvas Tent Repair Near Olympia?? by wildfire
[Today at 08:57:20 AM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal