collapse

Advertisement


Author Topic: Reloading Question - .270 Win Woodleigh 150 gr Weldcore PP SN  (Read 6706 times)

Offline Hunter4Life

  • supreme predator, hunter, carnivore, political animal, warrior for hunter's rights
  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Apr 2008
  • Posts: 162
  • Location: Bellevue, WA
  • Si vis pacem, para bellum
  • Groups: HHC, WWC, Hunting Works for Washington, SCI, Sportsmen's Alliance, NRA
I have some .270 Win Woodleigh 150 gr Weldcore PP SN. The Woodleigh website has no reloading data. All it says is the following:

Quote
As a general rule Woodleigh RN and PP bullets generate similar pressures to conventionally constructed soft nose bullets. You can use published data from other bullet and powder manufacturers. For safety, reduce by 5% and work up.
 

The BC is .463 and the closest thing I found was in the Hornady Manual #7. They have loads listed for a 150 gr SP with a BC of .462. The #1 powder they recommend is H4350 using anywhere from 46.6 gr to 52.3 gr. I am using CCI benchrest large rifle primers and Federal once fired brass. Has anyone loaded the 150 gr Woodleigh in .270 Win? Any loads you can recommend?
If guns kill people, then…
- pencils misspell words.
- cars make people drive drunk.
- spoons made Rosie O’Donnell fat.

Offline bobcat

  • Global Moderator
  • Trade Count: (+14)
  • Legend
  • *****
  • Join Date: Mar 2007
  • Posts: 39215
  • Location: Rochester
    • robert68
Re: Reloading Question - .270 Win Woodleigh 150 gr Weldcore PP SN
« Reply #1 on: May 05, 2008, 06:29:58 PM »
I haven't used Woodleighs but I've considered them. They're supposed to be a heck of a good bullet. I've loaded quite a few different 150 grain 270 bullets, and I've had the best luck with H4831, usually 57.5 or 58.0 grains. H4350 is good also, and I've tried it, but couldn't beat the H4831.

Offline AWS

  • Trade Count: (+2)
  • Sourdough
  • *****
  • Join Date: Dec 2007
  • Posts: 1838
Re: Reloading Question - .270 Win Woodleigh 150 gr Weldcore PP SN
« Reply #2 on: May 05, 2008, 07:18:02 PM »
Even if I had a load that worked in my rifle, odds are it wouldn't be the best for yours.  When I loaded for 270's all three of them like different loads.  Just pick a powder  4831, 4350 etc. and start working up loads to find the best for your rifle.

AWS
After the first shot the rest are just noise.

Make mine a Minaska

Offline MountainWalk

  • "Pa Nevermissashot"
  • Political & Covid-19 Topics
  • Trade Count: (+1)
  • Frontiersman
  • *****
  • Join Date: Mar 2008
  • Posts: 3083
  • Location: Afognak, POW, Kodiak, Quilcene
  • High lead logger/ cutter
Re: Reloading Question - .270 Win Woodleigh 150 gr Weldcore PP SN
« Reply #3 on: May 05, 2008, 08:56:06 PM »
the woodleighs are a fantastic bullet.. ive been looking at some of their super heavy 06 bullets.. thinking they are 248 grainers
The way that you wander, is the way that you choose
The day that you tarry, is the day that you lose

Offline bobcat

  • Global Moderator
  • Trade Count: (+14)
  • Legend
  • *****
  • Join Date: Mar 2007
  • Posts: 39215
  • Location: Rochester
    • robert68
Re: Reloading Question - .270 Win Woodleigh 150 gr Weldcore PP SN
« Reply #4 on: May 05, 2008, 09:02:59 PM »
Yes I was looking at those heavy 30 caliber Woodleighs also. They're 240 grains, and made especially for 30-06 velocities. Someday I will probably try them. For now I'll just stick with Barnes.

Offline MountainWalk

  • "Pa Nevermissashot"
  • Political & Covid-19 Topics
  • Trade Count: (+1)
  • Frontiersman
  • *****
  • Join Date: Mar 2008
  • Posts: 3083
  • Location: Afognak, POW, Kodiak, Quilcene
  • High lead logger/ cutter
Re: Reloading Question - .270 Win Woodleigh 150 gr Weldcore PP SN
« Reply #5 on: May 05, 2008, 09:06:25 PM »
yes, those should be a bomb on elk or bear. i really dig heavy for caliber bullets. if 220's offer straight line penetration, then the 240's orta be really super
The way that you wander, is the way that you choose
The day that you tarry, is the day that you lose

Offline Hunter4Life

  • supreme predator, hunter, carnivore, political animal, warrior for hunter's rights
  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Apr 2008
  • Posts: 162
  • Location: Bellevue, WA
  • Si vis pacem, para bellum
  • Groups: HHC, WWC, Hunting Works for Washington, SCI, Sportsmen's Alliance, NRA
Re: Reloading Question - .270 Win Woodleigh 150 gr Weldcore PP SN
« Reply #6 on: May 05, 2008, 09:20:52 PM »
Thanks for all your advice.  This is my first time using Woodleigh's.  I normally use the Barnes products.  I think the 130 gr Triple-Shock X is an excellent bullet for the .270 Win.
« Last Edit: May 05, 2008, 09:27:40 PM by Hunter4Life »
If guns kill people, then…
- pencils misspell words.
- cars make people drive drunk.
- spoons made Rosie O’Donnell fat.

 


* Advertisement

* Recent Topics

35 whelen by CP
[Today at 11:20:43 AM]


GO 2025 15th Annual Hunting-Washington Christmas Gift Exchange by WapitiTalk1
[Today at 10:51:57 AM]


Idaho on the verge of outlawing by Tbar
[Today at 10:47:00 AM]


Four less by BeerBugler
[Today at 09:35:50 AM]


“Recreational trappers”? by Loup Loup
[Today at 08:59:35 AM]


Long Island Hunt by Sundance
[Today at 08:04:53 AM]


WA Bucket List….Mule Deer Permit by C-Money
[Today at 07:30:24 AM]


Furbearer research project, samples requested, by lewy
[Yesterday at 10:48:09 PM]


Nice bachelor herd by Dan-o
[Yesterday at 10:41:23 PM]


Coyote hunting with dogs by metlhead
[Yesterday at 08:39:32 PM]


GSP Breeders- looking for GSP puppy by SureThing
[Yesterday at 08:19:53 PM]


Such cool looking animals by Falcon
[Yesterday at 08:18:18 PM]


Big changes to skamania county boat launching by huntnnw
[Yesterday at 06:15:56 PM]


2027 Pink Run Destroyed by Happy Gilmore
[Yesterday at 02:25:10 PM]


Meet Kumpel by metlhead
[Yesterday at 12:04:28 PM]


Question about Hancock Timber Co Eastside by hunter399
[Yesterday at 12:14:09 AM]


Update repair complete Who knows Stihl messed up and cooked my 044 by Westside88
[December 19, 2025, 09:34:53 PM]


F150 Tire/Wheel Guys by elksnout
[December 19, 2025, 08:55:57 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal