collapse

Advertisement


Author Topic: A tough job but somebodys  (Read 5220 times)

Offline FC

  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: May 2010
  • Posts: 3954
  • Location: Wa
Re: A tough job but somebodys
« Reply #15 on: February 02, 2011, 04:52:36 PM »
The XD(m) isn't bad if you do a trigger job on it AND replace the striker bringing your cost up by about $180, it's trigger won't compare to a 1911 but it will be very easy to use. Mine is a 9mm (19+1 capacity) and you are right on the money with the high bore in relation to the grip, felt recoil is stronger in my XD(m) than a P239 by quite a bit. Accuracy is quite good post trigger job and the gun seems to be tough as nails, the only failures it's had in several thousand rounds have been operator induced I would trust that gun for personal defense without hesitation. It is also extremely easy to maintain with it's quick take-down and very minimal needs for maintenance.
The reason there are so many Ruger upgrades is because they're necessary.

Offline carpsniperg2

  • Site Sponsor
  • Global Moderator
  • Trade Count: (+126)
  • Legend
  • *****
  • Join Date: Sep 2009
  • Posts: 31527
  • Location: Goldendale,WA
Re: A tough job but somebodys
« Reply #16 on: February 02, 2011, 09:37:54 PM »
xdm 40 3.8 and a 7mm-08 or 270wsm would be my pick for a rifle. Sako if its in the budget, or tikka. If you want a little money left for a scope. :chuckle:
Owner: SPLIT DIAMOND TACTICAL
Firearms/Transfers/Parts/Optics
2011 HW Head Competition Winner

Offline CastleRocker

  • Trade Count: (+6)
  • Sourdough
  • *****
  • Join Date: Dec 2008
  • Posts: 1015
  • Location: Castle Rock, WA
Re: A tough job but somebodys
« Reply #17 on: February 02, 2011, 10:01:57 PM »
Love 'em or hate 'em, if you are going to use and abuse it; buy a Glock.  All others WILL fail.  Seen it happen too many times for it to be just an opinion.  The triggers suck, they feel cheap, and they are really ugly though!   

I have a 25 WSSM upper on an AR.  It's a good medium caliber, and if a second shot is needed, it's just a twitch of the finger away.  Almost zero recoil.  Haven't taken it deer hunting, (it's too ugly), but antelope hated it last season. 

I was going to suggest a Tikka in 270, but it looks like you have "too many" Tikka's already.  (I wasn't aware that there is such a thing as too many Tikka's).
Work to live, don't live to work.

You can educate away ignorance, sober up drunkenness, but you can't fix stupid.

Offline hoyt2002

  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: May 2010
  • Posts: 620
  • Location: kennewick
Re: A tough job but somebodys
« Reply #18 on: February 02, 2011, 10:24:16 PM »
i'd get a glock and a AR you can get all kinds of uppers for it and there fun to trick out. glocks are great reliable throw around guns. The glocks are ugly out of the box to start so no worry there.

Offline Harold

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Dec 2010
  • Posts: 203
  • Location: Wetside
Re: A tough job but somebodys
« Reply #19 on: February 03, 2011, 04:08:48 AM »
CZ P07 in 9mm. feels a million times nicer in the hand then the glock. comes with a decocker or you can switch it out for a saftey. i just picked one up and i love it. not a single issue and it holds 16+1 unlike the glock in the same size that holds 15+1. they are under 500$ i really suggest you look into them look at the reviews i dont think you will be able to find a single bad one about it.
Life's a garden. Dig it.

Offline Bofire

  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Old Salt
  • ******
  • Join Date: Oct 2007
  • Posts: 5524
  • Location: Yelm
  • Harley YAR YAR YAR!
Re: A tough job but somebodys
« Reply #20 on: February 03, 2011, 10:28:21 AM »
Looked at some XD's last night, some of those hold a ton of ammo!! Glocks and XDs side by side. Do you think the XD"M"s are worth it? I do not want a 40 it will be 9mm or 45. A Sako 85 is not out of the question $$ is not an issue, I will not own a weatherby rifle or cartridge.
Thanks for all the input guys, keep it up.
Carl
When the chips are down..... the buffalo is empty!!

I do not shop at Amazon

Offline JackOfAllTrades

  • Rasbo said I Ain't Right.
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Feb 2009
  • Posts: 6509
  • Location: Lynden, WA.
  • Μολὼν λαβέ
Re: A tough job but somebodys
« Reply #21 on: February 03, 2011, 11:17:00 AM »
Quote
$$ is not an issue

Wait a minute!  Not an issue?  That changes things.

Remind me what the primary use of the rifle is then...

XDm would be 40cal..  You'll just have to figure out what size for the XD in 45acp.

-Steve
The NRA says I'm a Master!
Colt's, Ruger's, Dan Wesson, & Kimber are my friends!
Proud to be a U.S. Navy Veteran.

If you never follow your dreams, you'll never go anywhere.

Critical thinking keeps people from freaking the hell out every time some half baked blogger forgets his meds. Unlike some of you, I do not have TawkethOutOfAnus© syndrome.

Offline Bofire

  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Old Salt
  • ******
  • Join Date: Oct 2007
  • Posts: 5524
  • Location: Yelm
  • Harley YAR YAR YAR!
Re: A tough job but somebodys
« Reply #22 on: February 03, 2011, 11:22:06 AM »
 :)Deer, not elk, not coyotes, mabbe pronghorn. the guy showed me 9 mm I thought sure was XDM, held 19 rounds!! the XD held like 13?? the 19 round one has a big grip extension on it.
thanks for you help.
Carl
When the chips are down..... the buffalo is empty!!

I do not shop at Amazon

Offline FC

  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: May 2010
  • Posts: 3954
  • Location: Wa
Re: A tough job but somebodys
« Reply #23 on: February 03, 2011, 11:45:59 AM »
There is a 9mm, .40 S&W and a .45ACP version of the XD(m), Springfield is even making compact XD(m)'s now too. The full size 9mm (I have one) does hold 19+1 using it's standard magazine, as for whether or not the XD(m) is worth it over the XD, I think that one is a matter of personal choice.
The reason there are so many Ruger upgrades is because they're necessary.

Offline JackOfAllTrades

  • Rasbo said I Ain't Right.
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Feb 2009
  • Posts: 6509
  • Location: Lynden, WA.
  • Μολὼν λαβέ
Re: A tough job but somebodys
« Reply #24 on: February 03, 2011, 11:47:13 AM »
9mm= :nono:

You didn't a belted cartridge...

260AI.

Savage action, Saka action, Rem action.. Pick one. Krieger barrel ..  Pick one. McMillan stock?

If money is not an issue, then BUILD what you want.

-Steve
The NRA says I'm a Master!
Colt's, Ruger's, Dan Wesson, & Kimber are my friends!
Proud to be a U.S. Navy Veteran.

If you never follow your dreams, you'll never go anywhere.

Critical thinking keeps people from freaking the hell out every time some half baked blogger forgets his meds. Unlike some of you, I do not have TawkethOutOfAnus© syndrome.

Offline Curly

  • Trade Count: (+2)
  • Legend
  • ******
  • Join Date: Mar 2007
  • Posts: 20921
  • Location: Thurston County
Re: A tough job but somebodys
« Reply #25 on: February 03, 2011, 12:02:18 PM »
Browning X-bolt in 25-06 is what I will suggest.
May I always be the kind of person my dog thinks I am.

><((((º>` ><((((º>. ><((((º>.¸><((((º>

Offline FC

  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: May 2010
  • Posts: 3954
  • Location: Wa
Re: A tough job but somebodys
« Reply #26 on: February 03, 2011, 12:06:40 PM »
What is wrong with 9mm Steve?
The reason there are so many Ruger upgrades is because they're necessary.

Offline Alchase

  • Trade Count: (0)
  • Legend
  • ******
  • Join Date: Apr 2007
  • Posts: 20319
  • Location: Tinker AFB, OK
Re: A tough job but somebodys
« Reply #27 on: February 03, 2011, 12:16:05 PM »
:)Deer, not elk, not coyotes, mabbe pronghorn. the guy showed me 9 mm I thought sure was XDM, held 19 rounds!! the XD held like 13?? the 19 round one has a big grip extension on it.
thanks for you help.
Carl

XD Service model 9mm holds 16 rounnds

XD Compact model 9mm holds 10 and 13 rounds

XD Sub compact holds 13 rounds and 16 rounds
Only 2 defining forces sacrificed themselves for you:
The American Soldier and Jesus Christ. One died for your freedom, the other for your soul.

My rock,
He trains my hands for war and my fingers for battle.
Psalm 144.1

Offline Bofire

  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Old Salt
  • ******
  • Join Date: Oct 2007
  • Posts: 5524
  • Location: Yelm
  • Harley YAR YAR YAR!
Re: A tough job but somebodys
« Reply #28 on: February 03, 2011, 12:55:48 PM »
 :)Alchase, saw it last night, no doubt, 19 rounds. I prefer a 9 to a 40 but neither one is a 45.
Jack, I already did the custom gun thing, couple times, my current 300 WM is a custom.  square and trued Whitworth action, Douglas barrel, Timney, glass bedded. I just wanna buy one now.
Carl
When the chips are down..... the buffalo is empty!!

I do not shop at Amazon

Offline JackOfAllTrades

  • Rasbo said I Ain't Right.
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Feb 2009
  • Posts: 6509
  • Location: Lynden, WA.
  • Μολὼν λαβέ
Re: A tough job but somebodys
« Reply #29 on: February 03, 2011, 02:08:22 PM »
Savage SKU-19212 model 111 Lightweight Hunter.  6.5 x 284 Norma. or 308win.

Savage SKU-19133 model 11 Long Range Hunter. 260 Rem. or 308win.
The NRA says I'm a Master!
Colt's, Ruger's, Dan Wesson, & Kimber are my friends!
Proud to be a U.S. Navy Veteran.

If you never follow your dreams, you'll never go anywhere.

Critical thinking keeps people from freaking the hell out every time some half baked blogger forgets his meds. Unlike some of you, I do not have TawkethOutOfAnus© syndrome.

 


* Advertisement

* Recent Topics

Bow mount trolling motors by Happy Gilmore
[Today at 07:58:22 AM]


2025 OILS! by Ridgerunner
[Today at 07:40:49 AM]


best draw for moose unit wise by Ridgerunner
[Today at 07:40:00 AM]


FFL preferences or warnings in Olympia or south Sound area? by lhrbull
[Today at 06:59:24 AM]


Nooksack Archery Tag by LongBomb
[Today at 06:29:37 AM]


I’m on a blacktail mission by Turner89
[Yesterday at 11:33:35 PM]


Idaho 2025 Controlled Hunts by TeacherMan
[Yesterday at 10:43:16 PM]


AKC lab puppies! Born 06/10/2025 follow as they grow!!! by scottfrick
[Yesterday at 09:54:06 PM]


Basin elk by hughjorgan
[Yesterday at 09:50:49 PM]


Getting back into dogs by bearpaw
[Yesterday at 09:06:14 PM]


Cowiche Quality Buck by Nwgunner
[Yesterday at 08:55:00 PM]


MA-10 Coho by WAcoueshunter
[Yesterday at 08:50:46 PM]


Is FS70 open? by CarbonHunter
[Yesterday at 08:09:04 PM]


Muzzy Mission Quality!!! by NOCK NOCK
[Yesterday at 07:49:11 PM]


Colockum Archery Bull Tag by Smittyk44
[Yesterday at 04:23:53 PM]


49 degrees north late Moose tag by Buzzsaw461
[Yesterday at 04:11:52 PM]


I'm Going To Need Karl To Come up With That 290 Muley Sunscreen Bug Spray Combo by BULLBLASTER
[Yesterday at 03:53:35 PM]


Mature bulls during late season? by Pete112288
[Yesterday at 03:51:08 PM]


Stillaguamish 448 QD rifle tag by Hi-Liter
[Yesterday at 03:23:47 PM]


Vashon Island deer tag by bowhunter_1
[Yesterday at 02:59:43 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal