collapse

Advertisement


Author Topic: hoyt proelite for 3d?  (Read 4893 times)

Offline ashersdad

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Nov 2010
  • Posts: 88
  • Location: spokane area
hoyt proelite for 3d?
« on: March 01, 2011, 03:56:12 PM »
I just bought a 2008 Hoyt pro elite with xt 3000 limbs spiral x cams a nap quick tune smart rest. I am going to put a armor tec 5 pin sight. I shoot a turbo hawk now. I have not shot the pro elite yet I will get it next week. I am going to shoot a lot of 3d shoots this year. In your opinion will the pro elite make a better 3d bow than the turbo hawk and why?  :dunno:

Offline alwinearcher

  • Still here
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Jul 2009
  • Posts: 1617
  • Location: chewelah
Re: hoyt proelite for 3d?
« Reply #1 on: March 01, 2011, 05:06:27 PM »
Well, It is hard to say which is a "better" 3D bow.
IT partly depends on where your strong and weak points are for shooting 3D.
Your Turbo Hawk is a faster bow, around 320 FPS I believe. Its shorter Axel to Axel may make it slightly less forgiving thought.
The Pro Elite I would put in more of a target bow category then a 3D bow category. Long ATA, large Brace height and fairly slow, but extremely accurate.

So before I would answer which is a better 3D bow for you  I would ask you a few questions first.
What is your draw length?
Are you extremely proficient at judging yardage?
How consistent of a shooter are you?

If you have a 30" + draw length, Hands down shoot the Elite,
But if you have a 27" or 28" draw and struggle with yardage at times, you will not get the speeds out of the Pro-Elite you will need to make the podium.

I personally have found my sweet spot for 3D is around 315 FPS I shoot very accurate at that speed and it is just fast enough to make up for my occasional laps in yardage judgment

Matt Alwine

Offline ashersdad

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Nov 2010
  • Posts: 88
  • Location: spokane area
Re: hoyt proelite for 3d?
« Reply #2 on: March 01, 2011, 06:10:58 PM »
I am pretty good at guessing yardage. I am normally within a yard or 3 of what I guessed.  I have a 28 in draw. I was told with my light speed arrows I should get around 300 fps out of the elite. Or have I been told a story. I get around 289 out of my hawk now the way I have it set up.  Thanks for the help

Offline ashersdad

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Nov 2010
  • Posts: 88
  • Location: spokane area
Re: hoyt proelite for 3d?
« Reply #3 on: March 01, 2011, 06:38:53 PM »
also ill be pulling 65 pounds

Offline alwinearcher

  • Still here
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Jul 2009
  • Posts: 1617
  • Location: chewelah
Re: hoyt proelite for 3d?
« Reply #4 on: March 01, 2011, 10:41:22 PM »
I cant find the exact specs for it, but I believe with the 3000 limbs the IBO speed is around 305 FPS.
With a 28" draw you are going to loose atleast 20 FPS off that 305. I would guess you will end up shooting in the 285 FPS range and that would be with a min weight arrow of 325 FPS.

I used to shoot a Ultra Elite with Spiral cams and XT2000 limbs at 29.5" draw. even with that bow which is a 20 FPS faster bow, and a 1.5" longer draw length I was only able to get about 310 FPS out of it.

The pro Elite is going to be a great shooting bow for you but I would spend a LOT of time practicing my yardage at that speed.
Guys like Levi Morgan and Dan McCarthy that can practice their yardage 8 hours a day are awesome at 3D with a 280 FPS bow, but the average 3D shooter will do better with a bow shooting 310+ IMO

 
Matt Alwine

Offline D-Rock425

  • Washington For Wildlife
  • Trade Count: (+12)
  • Explorer
  • ******
  • Join Date: Jun 2009
  • Posts: 13295
  • Location: Lake stevens
Re: hoyt proelite for 3d?
« Reply #5 on: March 02, 2011, 06:38:13 AM »
Great shooting bow but its not great 3-D bow.  That bow is a great marked yardage bow.

Offline ashersdad

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Nov 2010
  • Posts: 88
  • Location: spokane area
Re: hoyt proelite for 3d?
« Reply #6 on: March 02, 2011, 03:53:11 PM »
Thanks for the advice guys.I think it will become my indoor bow and ill shoot my hawk for 3d and hunting

Offline alwinearcher

  • Still here
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Jul 2009
  • Posts: 1617
  • Location: chewelah
Re: hoyt proelite for 3d?
« Reply #7 on: March 02, 2011, 05:39:59 PM »
Thanks for the advice guys.I think it will become my indoor bow and ill shoot my hawk for 3d and hunting

That sounds like a smart plan.
Matt Alwine

 


* Advertisement

* Recent Topics

35 whelen by CP
[Today at 11:20:43 AM]


GO 2025 15th Annual Hunting-Washington Christmas Gift Exchange by WapitiTalk1
[Today at 10:51:57 AM]


Idaho on the verge of outlawing by Tbar
[Today at 10:47:00 AM]


Four less by BeerBugler
[Today at 09:35:50 AM]


“Recreational trappers”? by Loup Loup
[Today at 08:59:35 AM]


Long Island Hunt by Sundance
[Today at 08:04:53 AM]


WA Bucket List….Mule Deer Permit by C-Money
[Today at 07:30:24 AM]


Furbearer research project, samples requested, by lewy
[Yesterday at 10:48:09 PM]


Nice bachelor herd by Dan-o
[Yesterday at 10:41:23 PM]


Coyote hunting with dogs by metlhead
[Yesterday at 08:39:32 PM]


GSP Breeders- looking for GSP puppy by SureThing
[Yesterday at 08:19:53 PM]


Such cool looking animals by Falcon
[Yesterday at 08:18:18 PM]


Big changes to skamania county boat launching by huntnnw
[Yesterday at 06:15:56 PM]


2027 Pink Run Destroyed by Happy Gilmore
[Yesterday at 02:25:10 PM]


Meet Kumpel by metlhead
[Yesterday at 12:04:28 PM]


Question about Hancock Timber Co Eastside by hunter399
[Yesterday at 12:14:09 AM]


Update repair complete Who knows Stihl messed up and cooked my 044 by Westside88
[December 19, 2025, 09:34:53 PM]


F150 Tire/Wheel Guys by elksnout
[December 19, 2025, 08:55:57 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal