collapse

Advertisement


Author Topic: Ultrasonic Cleaner  (Read 2132 times)

Offline vmkeith

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Jun 2010
  • Posts: 67
  • Location: Vancouver, Wa
Ultrasonic Cleaner
« on: August 21, 2011, 06:37:25 AM »
I've got an ultrasonic cleaner that I'm thinking of using for two things...cleaning smaller gun parts and cleaning brass. I've done searches for what to use for cleaning gun parts and brass, and all I really came up with was brass cleaning. The general consensus is to use distilled water, white vinegar, and a drop or two of dish soap (optional). After cleaning, immediately put the brass in a water/baking soda solution to neutralize the vinegar.  Then put it through a standard tumbler to get that nice shine.

For all you guys that use ultrasonic cleaners, does this sound about right?

The other part of that is for cleaning gun parts. I've read that it does wonders for the BCG. What would be a good cleaning recipe for gun parts, besides just getting the Hornady One Shot stuff.
“No person was ever honored for what he received. Honor has been the reward for what he gave.” -Calvin Coolidge

"The deadliest weapon in the world is a Marine and his rifle." -Gen. John "Black Jack" Pershing, U.S. Army

Offline high country

  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: May 2007
  • Posts: 5133
Re: Ultrasonic Cleaner
« Reply #1 on: August 21, 2011, 07:29:33 AM »
I am unable to help on the neutralizer, but step two of you plan works for most guys. For the best media life and cleaning, look up stainless steel tumbler media......one time buy.

Offline Swag

  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Jan 2010
  • Posts: 278
  • Location: Benton co.
  • Team Dog Pile
Re: Ultrasonic Cleaner
« Reply #2 on: August 23, 2011, 06:59:14 AM »
I just use a commercial product for my ultra sonic cleaner I purchased from Mc Mastercarr.  http://www.mcmaster.com/#ultrasonic-cleaning-solutions/=dqsodq
I have never tried it on brass, but it is the best thing since sliced bread when it come to cleaning Gun parts.  Especially if you have a Ultrasonic cleaner that is heated.  I have been using the same 1 gallons jug of concentrate for about 4 years now.  I use this thing for every thing, I probably should clean it more often but I haven't seen a whole lot of decreased performace by not cleaning as often.  I usually end up cleaning it when it gets so full of gunk that it is covering the parts as I put them into the basket.  The nice thin about the solvent that I use (Heavy Duty Degreaser Concentrate under the  Solvent-Free Water-Based (Aqueous) Solutions) is there is no neutralisation of the solvent when you are done. Just rinse it under warm running water & blow dry with an Air Compressor..  It comments in the info about a possibly discoloring Aluminum I have put at least 40 Ar-15 receivers through it & never had any problem.  I am "Cooking" one right now trying to get all the Krylon off that some body had layered on supper heavy years ago & slowly but surely it it cumming off perfectly... The only issue is that there is some much cumming off I will have to clean it for sure when I am done...

Offline vmkeith

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Jun 2010
  • Posts: 67
  • Location: Vancouver, Wa
Re: Ultrasonic Cleaner
« Reply #3 on: August 26, 2011, 05:00:25 PM »
I'm lovin' the ultrasonic cleaner. I used it to clean the BCG on my AR15 today using the Lyman cleaning solution...all I can say is wow. I like to take my time when I'm cleaning any of my firearms, and what usually takes me 1-1.5hrs on the BCG alone, only took 30min to clean...without all the mess. Next I'll try cleaning all my once fired brass.
“No person was ever honored for what he received. Honor has been the reward for what he gave.” -Calvin Coolidge

"The deadliest weapon in the world is a Marine and his rifle." -Gen. John "Black Jack" Pershing, U.S. Army

 


* Advertisement

* Recent Topics

Buying pheasants for training by trapp01
[Yesterday at 08:44:40 PM]


Mt. Spokane North Moose by Farmer72
[Yesterday at 08:12:24 PM]


Selkirk bull moose. by 6haase6
[Yesterday at 07:29:05 PM]


Steel Targets??? by jrebel
[Yesterday at 05:30:52 PM]


Greenriver quality Elk permit by First timer
[Yesterday at 03:13:57 PM]


Bow mount trolling motors by Stein
[Yesterday at 09:05:06 AM]


Oregon results posted. by trophyhunt
[Yesterday at 08:51:12 AM]


best draw for moose unit wise by hunter399
[Yesterday at 08:31:10 AM]


Idaho 2025 Controlled Hunts by trophyelk6x6
[Yesterday at 08:24:13 AM]


2025 OILS! by Ridgerunner
[Yesterday at 07:40:49 AM]


FFL preferences or warnings in Olympia or south Sound area? by lhrbull
[Yesterday at 06:59:24 AM]


Nooksack Archery Tag by LongBomb
[Yesterday at 06:29:37 AM]


I’m on a blacktail mission by Turner89
[June 13, 2025, 11:33:35 PM]


AKC lab puppies! Born 06/10/2025 follow as they grow!!! by scottfrick
[June 13, 2025, 09:54:06 PM]


Basin elk by hughjorgan
[June 13, 2025, 09:50:49 PM]


Getting back into dogs by bearpaw
[June 13, 2025, 09:06:14 PM]


Cowiche Quality Buck by Nwgunner
[June 13, 2025, 08:55:00 PM]


MA-10 Coho by WAcoueshunter
[June 13, 2025, 08:50:46 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal