Free: Contests & Raffles.
Lucky mines a 2007.
Oh no here we go!
Quote from: marty on July 14, 2011, 06:50:04 PMOh no here we go! Yep here we go, our steering works just fine....On a kinda serious note, not to start more bashing about dodge, but they sure do not have very high sales figures, yes i see it does not cover the 1500 or 2500 2wd but really how many people buy those, 4 yrs worth and only 242k sold, ford or chev sell more than that in 1 year...
The recall covers 242,780 Ram 1500, 2500 and 3500 pickups from the 2008 to 2011 model years.
Its the tie rod end :bash:The girlfriend pulled out of the driveway at lunch one day and it snapped they then had the nerve to ask her what she hit say the least I was not happy.
In a July 6 letter, which was posted this week on the safety agency’s Web site, Chrysler attributed the problem to a tie-rod fracture caused “due to a weakening of the ball stud,” which could occur if there were an alignment problem. Such a failure would affect the steering.Chrysler said the problem “tends to occur during low-speed, parking-lot type maneuvers when the customer is making a tight turn.”“There were a few minor accidents and one minor injury,” said Vince Muniga, a Chrysler spokesman, when reached by telephone.Last December, Chrysler recalled about 15,000 of its heavy-duty 4500 and 5500 Ram pickups from the 2008–11 model years for the same problem. In April, the agency responded to complaints of similar failures from owners of other Ram models and opened a defect investigation.
Vehicle Make / Model: Model Year(s): DODGE / RAM 1500 2008 DODGE / RAM 2500 2003-2011 DODGE / RAM 3500 2003-2011 Manufacturer: CHRYSLER GROUP LLC Mfr's Report Date: JUL 06, 2011 NHTSA CAMPAIGN ID Number:11V350000 PE11009NHTSA Action Number:PE11009 Component:STEERING:LINKAGES:TIE ROD ASSEMBLY Potential Number of Units Affected:242,780 Summary:CHRYSLER IS RECALLING CERTAIN MODEL YEAR 2008-2011 DODGE RAM 2500/3500 4X4, MANUFACTURED FROM FEBRUARY 14, 2008, THROUGH MARCH 28, 2011; MODEL YEAR 2008-2011 DODGE RAM 3500 CAB CHASSIS 4X2, MANUFACTURED FROM FEBRUARY 14, 2008, THROUGH MARCH 28, 2011; AND MODEL YEAR 2008 DODGE RAM 1500 MEGA CAB 4X4, MANUFACTURED FROM FEBRUARY 14, 2008, THROUGH AUGUST 15, 2008. BECAUSE THE LEFT TIE ROD BALL STUD MAY FRACTURE.. THIS CONDITION TENDS TO OCCUR DURING LOW SPEED PARKING LOT TYPE MANEUVERS WHEN THE CUSTOMER IS MAKING A TIGHT TURN. ADDITIONALLY, MODEL YEAR 2003-2008 DODGE RAM 2500/3500 VEHICLES MAY HAVE RECEIVED THE AFFECTED TIE ROD ASSEMBLY AS A REPLACEMENT PART DURING NORMAL SERVICE. Consequence:THIS CONDITION COULD RESULT IN THE POTENTIAL LOSS OF DIRECTIONAL STABILITY IN THE LEFT HAND FRONT WHEEL, INCREASING THE RISK OF A CRASH. Remedy:DEALERS WILL INSPECT THE TIE ROD ENDS FOR RELATIVE ORIENTATION AND REPLACE THE LEFT OUTER TIE ROD AS REQUIRED AND PERFORM A FRONT END TOE ALIGNMENT AS NEEDED. THIS SERVICE WILL BE PERFORMED FREE OF CHARGE. THE MANUFACTURER HAS NOT YET PROVIDED AN OWNER NOTIFICATION SCHEDULE. OWNERS MAY CONTACT CHRYSLER AT 1-800-853-1403. Notes:CHRYSLER SAFETY RECALL NO. L16. OWNERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO http://WWW.SAFERCAR.GOV .
The pick-up was only 6 months old so they covered it .