Call me crazy

[high country]

buzz over to plummer and see mel doyle. he will possibly do it while you wait.

[buckman202]

Do you have his contact everything I google come back as disconnected

[huntinguy]

I thought those were drilled an tapped for scope mounts... It is a side mount that I have seen on many of them.

Or am i thinking about the wrong gun?

[buckman202]

I believe the savage 340 is pre drilled for a scope mount(this is the version before it became a savage) it has two holes in the rear for a peep sight but not the four needed for a sidemount.

[buckman202]

Found a number that got through to him. Probably gonna take it up there once I get the mount in the mail. Thanks for the heads up!

[coriantonk]

Are you sure that there is not 4 holes running parallel to the stock on the left side of the action?  I just have never seen any of those rifles that did not have them.  Are you sure it is not a 325-A?  From just a little digging I find that only the earliest models were not pre drilled from the factory.

[buckman202]

yup reading right off the barrel. Stevens 325-c. All the 325-c's I've seen online have had to be drilled and then the stock cut down .

[coriantonk]

Thanks for the clarification, in the original post you put 325-s, that was what confused me.

[buckman202]

[high country]

No problem.....Mel and Sam are good folk. Take a camera, there is a banging mule deer in the shop.

As a favor, will you take a pic of his jack operated barrel vice for me, I am gonna build one like it.

[buckman202]

yea as long as he is ok with it. I will be in sometime next week and will pm it to you.