collapse

Advertisement


Author Topic: Call me crazy  (Read 5157 times)

Offline high country

  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: May 2007
  • Posts: 5133
Re: Call me crazy
« Reply #15 on: August 18, 2011, 02:29:49 PM »
buzz over to plummer and see mel doyle. he will possibly do it while you wait.

Offline buckman202

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Aug 2011
  • Posts: 131
  • Location: Palouse
Re: Call me crazy
« Reply #16 on: August 18, 2011, 02:51:01 PM »
Do you have his contact everything I google come back as disconnected

Offline huntinguy

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: May 2011
  • Posts: 166
  • Location: Washington
Re: Call me crazy
« Reply #17 on: August 18, 2011, 02:58:38 PM »
I thought those were drilled an tapped for scope mounts... It is a side mount that I have seen on many of them.

Or am i thinking about the wrong gun?

Offline buckman202

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Aug 2011
  • Posts: 131
  • Location: Palouse
Re: Call me crazy
« Reply #18 on: August 18, 2011, 03:14:29 PM »
I believe the savage 340 is pre drilled for a scope mount(this is the version before it became a savage) it has two holes in the rear for a peep sight but not the four needed for a sidemount.

Offline buckman202

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Aug 2011
  • Posts: 131
  • Location: Palouse
Re: Call me crazy
« Reply #19 on: August 18, 2011, 03:22:29 PM »
Found a number that got through to him. Probably gonna take it up there once I get the mount in the mail. Thanks for the heads up!

Offline coriantonk

  • Washington For Wildlife
  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: May 2009
  • Posts: 492
  • Location: Tacoma
Re: Call me crazy
« Reply #20 on: August 18, 2011, 04:08:08 PM »
Are you sure that there is not 4 holes running parallel to the stock on the left side of the action?  I just have never seen any of those rifles that did not have them.  Are you sure it is not a 325-A?  From just a little digging I find that only the earliest models were not pre drilled from the factory.
« Last Edit: August 18, 2011, 04:19:28 PM by coriantonk »
There's a reason they call it hunting, not killing.

Offline buckman202

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Aug 2011
  • Posts: 131
  • Location: Palouse
Re: Call me crazy
« Reply #21 on: August 18, 2011, 04:43:38 PM »
yup reading right off the barrel. Stevens 325-c. All the 325-c's I've seen online have had to be drilled and then the stock cut down .

Offline coriantonk

  • Washington For Wildlife
  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: May 2009
  • Posts: 492
  • Location: Tacoma
Re: Call me crazy
« Reply #22 on: August 18, 2011, 04:53:44 PM »
Thanks for the clarification, in the original post you put 325-s, that was what confused me.
There's a reason they call it hunting, not killing.

Offline buckman202

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Aug 2011
  • Posts: 131
  • Location: Palouse
Re: Call me crazy
« Reply #23 on: August 18, 2011, 04:54:44 PM »


Offline high country

  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: May 2007
  • Posts: 5133
Re: Call me crazy
« Reply #24 on: August 18, 2011, 07:40:05 PM »
No problem.....Mel and Sam are good folk. Take a camera, there is a banging mule deer in the shop.

As a favor, will you take a pic of his jack operated barrel vice for me, I am gonna build one like it.

Offline buckman202

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Aug 2011
  • Posts: 131
  • Location: Palouse
Re: Call me crazy
« Reply #25 on: August 18, 2011, 08:24:21 PM »
yea as long as he is ok with it. I will be in sometime next week and will pm it to you.

 


* Advertisement

* Recent Topics

New York deer by Bearhunter308
[Today at 10:14:19 PM]


Anybody breeding meat rabbit? by jackelope
[Today at 10:02:50 PM]


DIY Ucluelet trip by metlhead
[Today at 09:40:00 PM]


Survey in ? by metlhead
[Today at 09:35:57 PM]


Alaska Fishing Guide and Lodge Recommendations by Tbar
[Today at 09:31:49 PM]


Colorado Results by cem3434
[Today at 08:35:51 PM]


NEED ADVICE: LATE after JUNE 15th IDAHO BEAR by Sliverslinger
[Today at 08:31:23 PM]


Resetting dash warning lights by Sandberm
[Today at 08:13:27 PM]


Please Report Problems & Bugs Here by Mossy
[Today at 06:17:02 PM]


What's flatbed pickup life like? by Special T
[Today at 05:52:28 PM]


Oregon spring bear by Fidelk
[Today at 04:58:27 PM]


Idaho General Season Going to Draw for Nonresidents by idahohuntr
[Today at 01:51:40 PM]


Seekins PH2 & Element sale by BigJs Outdoor Store
[Today at 12:40:26 PM]


Kokanee Fishing Tournament!! 🎣 June 13-14, Joseph OR by WRKG4GD
[Today at 11:42:02 AM]


wings wings and more wings! by birddogdad
[Today at 11:00:11 AM]


Jim Horn's elk calling, instructional audio CD's. by WapitiTalk1
[Today at 09:46:03 AM]


Wyoming elk who's in? by link
[Today at 07:00:33 AM]


CVA Optima V2 durasight rail mod by craigapphunt
[Today at 05:56:00 AM]


Last year putting in… by wa.hunter
[Yesterday at 11:02:00 PM]


HUNTNNW 2025 trail cam thread and photos by huntnnw
[Yesterday at 10:34:36 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal