collapse

Advertisement


Author Topic: Grouse Rounds....? help  (Read 3182 times)

Offline Co

  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Jun 2010
  • Posts: 345
  • Location: Washington
    • http://www.facebook.com/EuropeanDesign
Grouse Rounds....? help
« on: September 18, 2011, 03:03:24 PM »
Me and my friend like to travel small, because usually grouse is secondary hunting critter when we are in the woods, My friend has a 22 and is trying to find a round that would allow more impact on grouse to nock it for a loop when bullet hits.. he has been talking about finding rubber bullets, or some kind of flat hollow tip... any ideas out there to the 22 hunter for grouse?

Now I have a new bond arms pistol 410/45, I have killed 1, and wounded two out of like 6 attempts, I know I need to be as close as possible with my short 4 1/4 in barrel, but witch 410 round should I be using ?????

thanks
Co
I Love Mule Deer.

, High Country Co

Offline Co

  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Jun 2010
  • Posts: 345
  • Location: Washington
    • http://www.facebook.com/EuropeanDesign
Re: Grouse Rounds....? help
« Reply #1 on: September 18, 2011, 03:04:29 PM »
btw, the 2 I wounded I had to finish of when I caught them....
I Love Mule Deer.

, High Country Co

Offline satchel3006

  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Sep 2008
  • Posts: 280
  • Location: Tricities
Re: Grouse Rounds....? help
« Reply #2 on: September 18, 2011, 04:16:22 PM »
Most .22 rounds should work for grouse just shoot for the head and you'll be fine. Have you patterned your .410 with various shells? That would probably be your best bet.

Offline Co

  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Jun 2010
  • Posts: 345
  • Location: Washington
    • http://www.facebook.com/EuropeanDesign
Re: Grouse Rounds....? help
« Reply #3 on: September 19, 2011, 07:00:28 AM »
Yes I have pattern one or 2 rounds, but rather then buying many being inexperienced with shotgun shells I thought it might be better to ask first to see where to start....?
I Love Mule Deer.

, High Country Co

Online CP

  • Trade Count: (+6)
  • Old Salt
  • ******
  • Join Date: Mar 2008
  • Posts: 7040
  • Location: Mukilteo
Re: Grouse Rounds....? help
« Reply #4 on: September 19, 2011, 07:08:14 AM »
Since you are up close with the .410 pistol, smaller shot will give a denser pattern and will have plenty of energy.   Try some 7 1/2 , in the heaviest load that you can find.

Offline newbs55

  • Washington For Wildlife
  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Apr 2009
  • Posts: 85
  • Location: Spokane
Re: Grouse Rounds....? help
« Reply #5 on: September 19, 2011, 10:46:54 AM »
So maybe this isnt the right place to ask but Are those even legal? i thought you can only hold three shells in a shotgun. or are those classified as a handgun? i would just hate to have the gamie be the one to explain to me that they aren't legal.

Offline Shoffy

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Jan 2011
  • Posts: 129
  • Location: Sumner, WA
Re: Grouse Rounds....? help
« Reply #6 on: September 19, 2011, 02:39:40 PM »
It's legal. The gun is considered a handgun. A shotgun cannot be shorted than 16" under federal regulations. As long as the bore is rifled (Which it is) it is not considered a shotgun, it's a pistol that happens to shot shot shell ammo. Grouse are allowed to be taken by centerfire rifles and pistols in WA. As far as ammo, I would use #0000 buck shot or the smallest available.
7-1/2 in a .410 is too light. Because the gun has no choke you basically have to be point blank range to be effective. My dad has a Judge pistol and it is basically ineffective in ranges longer than 5-10 yards. I do think they make a load that has like 4 pellets.

One interesting note: Taurus was manufacturing a large frame revolver that shoots 28Ga. shells, but the ATF put a stop on it because of it's classification. There is no centerfire caliber that converts to 28Ga. so it was considered a short barrel shotgun. The idea was a little cheesy to me anyway

Offline Co

  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Jun 2010
  • Posts: 345
  • Location: Washington
    • http://www.facebook.com/EuropeanDesign
Re: Grouse Rounds....? help
« Reply #7 on: September 19, 2011, 07:23:26 PM »
ok... good info...   I will get some of those and put it on paper....  and check it out..
Thanks
I Love Mule Deer.

, High Country Co

Offline cwegga

  • Trade Count: (0)
  • Pilgrim
  • *
  • Join Date: Jul 2009
  • Posts: 4
Re: Grouse Rounds....? help
« Reply #8 on: September 20, 2011, 06:26:52 PM »
So maybe this isnt the right place to ask but Are those even legal? i thought you can only hold three shells in a shotgun. or are those classified as a handgun? i would just hate to have the gamie be the one to explain to me that they aren't legal.

It shouldn't be a problem. Bond Arms is a company that makes (mostly/only?) derringers, so only two shells can be loaded at a time.

http://bondarms.com/

Offline SkookumJeff

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Jan 2011
  • Posts: 84
Re: Grouse Rounds....? help
« Reply #9 on: September 20, 2011, 08:50:38 PM »
I'd say you really need to pattern that thing to see what your shot density is at what range.  That will likely determine what shot size you need.

Skook

 


* Advertisement

* Recent Topics

GMU 247 Entiat bear hunting by BigredRusch
[Today at 11:15:06 AM]


3 days for Kings by 3nails
[Today at 11:15:05 AM]


Sockeye Numbers by buglebuster
[Today at 10:28:52 AM]


Best all around muzzy (updated) by CamoDup
[Today at 09:41:58 AM]


AUCTION: SE Idaho DIY Deer or Deer/Elk Hunt by Dan-o
[Today at 09:13:29 AM]


Full moon and last week of September by vandeman17
[Today at 08:49:49 AM]


2025 Montana alternate list by CaNINE
[Today at 05:52:10 AM]


2025 Crab! by spin05
[Today at 05:11:11 AM]


Lynx kittens confirmed in the Kettle Range by WapitiTalk1
[Yesterday at 11:21:59 PM]


Cowiche Quality Buck by buglebuster
[Yesterday at 10:29:26 PM]


50 inch SXS and Tracks? by bearpaw
[Yesterday at 08:08:34 PM]


Accura MR-X 45 load development by kyles_88
[Yesterday at 08:03:44 PM]


Oregon special tag info by Judespapa
[Yesterday at 12:24:57 PM]


wings wings and more wings! by birddogdad
[Yesterday at 11:27:43 AM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal