collapse

Advertisement


Author Topic: Cleaning Brushes  (Read 1453 times)

Offline BerettaShooter

  • Trade Count: (+1)
  • Pilgrim
  • *
  • Join Date: Aug 2011
  • Posts: 10
  • Location: Graham, WA
Cleaning Brushes
« on: October 16, 2011, 08:22:49 PM »
Anyone use cooper/brass brushes whe clean their rifles or pistols? Anyone uses patches only?
« Last Edit: October 16, 2011, 09:04:23 PM by BerettaShooter »

Offline high country

  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: May 2007
  • Posts: 5133
Re: Cleaning Brushes
« Reply #1 on: October 17, 2011, 05:44:29 AM »
Bronze brushes are fine, just do not try to reverse direction in the bore, and be sure it is all the way out before you reverse.

Offline Cascade_Sherpa

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Feb 2009
  • Posts: 170
  • Location: Ferndale, WA
Re: Cleaning Brushes
« Reply #2 on: October 26, 2011, 12:31:57 PM »
Personally I use nylon brushes for both pistol and rifles.....

Offline Huntbear

  • I am a BAD Kitteh
  • Washington For Wildlife
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Nov 2007
  • Posts: 9616
  • Location: Wandering Lost East of the Mountains
  • Y.A.R. Jester aka Smart Ass
    • http://www.facebook.com/profile.php?id=1236486665
Re: Cleaning Brushes
« Reply #3 on: October 26, 2011, 12:45:44 PM »
I use bronze brushes for most applications.  If I want to get crazy clean, I will break out the stainless brushes.  I always use a brush soaked in my favorite cleaning solution first, then let it set for a bit, then go to work with the patches. 
By my honorable conduct as a hunter let me give a good example and teach new hunters principles of honor, so that each new generation can show respect for their god, other hunters and the animals, and enjoy the dignity of the hunt.

Calling an illegal alien an 'undocumented immigrant' is like calling a drug dealer an 'unlicensed pharmacist'.

Offline Heredoggydoggy

  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Nov 2010
  • Posts: 5041
  • Location: Wenatchee
  • Team I'M TOO OLD FOR THIS $H!T !
Re: Cleaning Brushes
« Reply #4 on: October 26, 2011, 01:05:15 PM »
I've pretty much gone to the Patch Out Accelorator liquid followed by regular Patch Out at 1 hour intervals until the blue from the copper jackets is gone.  If i put a lot of rounds through the gun, like at the range, I'll run a bronze brush through the wet bore at the start, to loosen the powder fouling.
If it was easy, everybody would be doing it.

When Bernie Madoff did it, it's called a "Ponzi Scheme"
When Government does it, it's called "Social Security"

Offline high country

  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: May 2007
  • Posts: 5133
Re: Cleaning Brushes
« Reply #5 on: October 26, 2011, 01:18:09 PM »
I use bronze brushes for most applications.  If I want to get crazy clean, I will break out the stainless brushes.  I always use a brush soaked in my favorite cleaning solution first, then let it set for a bit, then go to work with the patches. 

I would discourage the use of stainless brushes if possible. you are getting to the same level of hardness and risk of bore scratches goes up.....not to say that a stainless brush will junk a bore, but sure has higher odds. if a bore can't be cleaned with powder and copper solvent, there is a problem.

Offline demontang

  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Jul 2008
  • Posts: 3412
  • Location: Selah
Re: Cleaning Brushes
« Reply #6 on: October 26, 2011, 03:07:39 PM »
I wont strip the copper out of my bore tell I see it effect the accuracy of the gun, I will clean the carbon out and make sure it doesnt rust. Sure the compatition shooters do a lot of cleaning but normally after 150-200 rounds or more. I need to find it but there is a study out there about over cleaning and how it doesnt allow the rifle to shot like it can and wipes out the crown of the bore faster. sierra's test 308 was involved in it and shot tighter groups and more uniformed pressures when dirty 500+ rounds :twocents:

Offline high country

  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: May 2007
  • Posts: 5133
Re: Cleaning Brushes
« Reply #7 on: October 26, 2011, 04:39:47 PM »
My makers tubes clean up quick and easy regardless of shots, factory tubes.....umm, not so much.

 


* Advertisement

* Recent Topics

Sauk Unit Youth Elk Tips by Kales15
[Today at 01:04:52 PM]


2025 Crab! by MLhunter1
[Today at 12:25:48 PM]


2025 Coyotes by JakeLand
[Today at 12:20:54 PM]


Price on brass? by Magnum_Willys
[Today at 12:18:54 PM]


AUCTION: SE Idaho DIY Deer or Deer/Elk Hunt by Dan-o
[Today at 10:28:23 AM]


Utah cow elk hunt by kselkhunter
[Today at 09:03:55 AM]


KODIAK06 2025 trail cam and personal pics thread by kodiak06
[Today at 07:03:46 AM]


Unknown Suppressors - Whisper Pickle by Sneaky
[Today at 04:09:53 AM]


Early Huckleberry Bull Moose tag drawn! by HillHound
[Yesterday at 11:25:17 PM]


THE ULTIMATE QUAD!!!! by Deer slayer
[Yesterday at 10:33:55 PM]


Archery elk gear, 2025. by WapitiTalk1
[Yesterday at 09:41:28 PM]


Oregon spring bear by kodiak06
[Yesterday at 04:40:38 PM]


Tree stand for Western Washingtn by kodiak06
[Yesterday at 04:37:01 PM]


Pocket Carry by BKMFR
[Yesterday at 03:34:12 PM]


A lonely Job... by Loup Loup
[Yesterday at 01:15:11 PM]


Range finders & Angle Compensation by Fidelk
[Yesterday at 11:58:48 AM]


Willapa Hills 1 Bear by hunter399
[Yesterday at 10:55:29 AM]


Bearpaw Outfitters Annual July 4th Hunt Sale by bearpaw
[Yesterday at 08:40:03 AM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal