collapse

Advertisement


Author Topic: .243 AI  (Read 3059 times)

Offline Wazukie

  • Business Sponsor
  • Trade Count: (+2)
  • Frontiersman
  • *****
  • Join Date: Nov 2009
  • Posts: 2674
  • Location: The Woods
  • Groups: NRA
.243 AI
« on: December 04, 2011, 09:52:54 PM »
Anyone reload for this?  I was given a rifle chambered in 243 AI.  ITs built off a Rem 722 action and has a very heavy Shilen 26" barrel.  I need to work of a load.  Im going to use it for long range fun out to 1000 yrds.
Matthew 6:33

Offline FALFire

  • Crazy Old Man with a Gun!
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Aug 2008
  • Posts: 1471
  • Location: Planet Earth
Re: .243 AI
« Reply #1 on: December 05, 2011, 05:33:37 AM »
What is the twist rate? That will make a difference for your long range shooting.

http://www.reloadersnest.com/frontpage.asp?CaliberID=105
Checkin' wind and makin' smoke.
That's how I roll...

Offline rbros

  • Business Sponsor
  • Trade Count: (+1)
  • Scout
  • *****
  • Join Date: Mar 2010
  • Posts: 433
  • Location: Olympia, Wa
Re: .243 AI
« Reply #2 on: December 05, 2011, 07:37:26 AM »
Reloadersnest is a good start.  Find out your twist rate and that will tell you what bullets you can run.  For long range, use the heaviest Berger your twist will allow for. 
R Bros Rifles
www.rbrosrifles.com

Offline Wazukie

  • Business Sponsor
  • Trade Count: (+2)
  • Frontiersman
  • *****
  • Join Date: Nov 2009
  • Posts: 2674
  • Location: The Woods
  • Groups: NRA
Re: .243 AI
« Reply #3 on: December 05, 2011, 09:28:01 PM »
So I have a 1:10.  I picked up some 95grn Berger VLD's.  Will hopefully get a load worked up and go test it tomorrow.  We'll see what happens.
Matthew 6:33

Offline AWS

  • Trade Count: (+2)
  • Sourdough
  • *****
  • Join Date: Dec 2007
  • Posts: 1838
Re: .243 AI
« Reply #4 on: December 06, 2011, 08:43:06 AM »
The 243 AI is one of the cartridges that gains little over the parent case aside from the trimming factor.  Most of the gains seen are from pushing the pressure high.  You could start with just under max loads for the standard 243 and work from there. 
After the first shot the rest are just noise.

Make mine a Minaska

Offline rbros

  • Business Sponsor
  • Trade Count: (+1)
  • Scout
  • *****
  • Join Date: Mar 2010
  • Posts: 433
  • Location: Olympia, Wa
Re: .243 AI
« Reply #5 on: December 06, 2011, 10:08:01 AM »
Usually around 150fps over a standard 243 in the 50+ I have built for guys.  Where it really shines is with today's slower powders and hvy bullets.  Get some RL22 to use with the 95s.
R Bros Rifles
www.rbrosrifles.com

Offline Wazukie

  • Business Sponsor
  • Trade Count: (+2)
  • Frontiersman
  • *****
  • Join Date: Nov 2009
  • Posts: 2674
  • Location: The Woods
  • Groups: NRA
Re: .243 AI
« Reply #6 on: December 06, 2011, 03:12:38 PM »
SO I started with some 87 grn Berger VLD  42 gr Varget 
1st three went .370"  Next 2 were pulled a bit.  Will keep working on it.
Matthew 6:33

Offline fishnate

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Apr 2009
  • Posts: 195
  • Location: NCW
  • It is what it is!
Re: .243 AI
« Reply #7 on: December 06, 2011, 03:20:45 PM »
I use 55gr nosler with 46 gr H380 nice tight groups. Prob not best for long range but great on the dogs.  :twocents:

 


* Advertisement

* Recent Topics

1 week till bear killin time! by CasterlyRock
[Today at 12:03:40 AM]


Tease 'l' by Ricochet
[Yesterday at 08:51:31 PM]


Stealth Cam QV20 by Kingofthemountain83
[Yesterday at 07:42:11 PM]


Taxidermy Issues....HELP! by Magnum_Willys
[Yesterday at 04:38:49 PM]


More Kings! by highside74
[Yesterday at 03:37:22 PM]


2025 Canning by 3boys
[Yesterday at 02:51:04 PM]


Bino Bandit by O. Nerka
[Yesterday at 02:30:42 PM]


Waterfowl Taxidermist by kodiak 907
[Yesterday at 11:37:57 AM]


Gots me a new/old rockchuck rifle coming by JDHasty
[Yesterday at 11:25:33 AM]


FirstLite at Big J's by BigJs Outdoor Store
[Yesterday at 11:16:24 AM]


Mt. St. Helens Goat by hunterednate
[Yesterday at 09:58:52 AM]


Are you using a Diesel Fuel Additive and if so which one? by JBar
[Yesterday at 09:09:51 AM]


AUCTION: Custom knife by Alden Cole by Dan-o
[Yesterday at 08:43:32 AM]


newbie bear field dressing and hide by ghosthunter
[Yesterday at 08:03:45 AM]


Grouse in Vail? by hunter399
[Yesterday at 07:28:12 AM]


2 Dozen CRD's for sale by Badhabit
[July 24, 2025, 09:52:44 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal