collapse

Advertisement


Author Topic: Musket Caps v. #11's  (Read 32878 times)

Offline Sabotloader

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Apr 2011
  • Posts: 2309
  • Location: Idaho, Northern
Re: Musket Caps v. #11's
« Reply #15 on: December 18, 2011, 07:35:52 AM »
I always shoot German Musket Caps.... Had a few other brands not want to stay on to well and when I would bend them a *censored* hair they were so hard to get off.... That was with #11 and other musket caps.... These German ones are made sweet with great regularity.... And easy to remove and install.... I have big fingers.... It makes it so much easier.... You could get a good capper and not have to worry..... But I always loose mine.... Every time.... Some caps you can't use in a capper..... Like these German ones....

Speaking of the #11 caps - i really want them difficult to get off for two reasons... 1.  I do not have to worry about them falling off which they do on occasion and 2. More importantly with the tight fit... let it rain they are very close to water and moisture proof.  one less worry. (Which by the way, IMO is very difficult to do with a Musket Cap - since they are slit all the way to the percussion material)

But you are right they are a bear to get off if you do not shoot them off.  I have to use the edge of a knife to pull them off.  Then that cap will not be used for hunting again as it has been stretched - but it will be good one to shoot paper with.
Keep shooting muzzleloaders - They are a blast!!

Offline muzbuster

  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Dec 2011
  • Posts: 483
  • Location: Pierce Co.
Re: Musket Caps v. #11's
« Reply #16 on: December 18, 2011, 08:21:00 AM »
MC – is bigger than a #11 PC and therefore easier put on and takeoff, big advantage when your fingers are cold and dexterity limited, they are also easier to see, if your eyes are over 50 you’ll appreciate that.

Oh yea, they burn hotter too.
Exactly the reasons I use musket caps.  :tup:

Offline Sabotloader

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Apr 2011
  • Posts: 2309
  • Location: Idaho, Northern
Re: Musket Caps v. #11's
« Reply #17 on: December 18, 2011, 11:27:26 AM »
MC – is bigger than a #11 PC and therefore easier put on and takeoff, big advantage when your fingers are cold and dexterity limited, they are also easier to see, if your eyes are over 50 you’ll appreciate that.

Oh yea, they burn hotter too.

I hope you saw the temp burn chart in this thread... It is often believed that the Musket cap is hotter than a #11, well that is the truth for a regular #11 but a #11 mag cap is just as hot as a Musket Cap...

I do not handle a cap at all (well other than to load a capper) whether it be a Musket or #11 - I use a capper much more reliable in the field to get the caps on the post tight and snug against the cap rim...
Keep shooting muzzleloaders - They are a blast!!

Offline Kowsrule30

  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Nov 2009
  • Posts: 3044
Re: Musket Caps v. #11's
« Reply #18 on: December 19, 2011, 01:54:04 PM »
I always shoot German Musket Caps.... Had a few other brands not want to stay on to well and when I would bend them a *censored* hair they were so hard to get off.... That was with #11 and other musket caps.... These German ones are made sweet with great regularity.... And easy to remove and install.... I have big fingers.... It makes it so much easier.... You could get a good capper and not have to worry..... But I always loose mine.... Every time.... Some caps you can't use in a capper..... Like these German ones....

I use German ones in my capper....


The caps I always get have flares on them and tend to jam up in my cappers..... Do you have this problem??

Offline grundy53

  • Global Moderator
  • Trade Count: (0)
  • Explorer
  • *****
  • Join Date: Mar 2010
  • Posts: 12860
  • Location: Lake Stevens
  • Learn something new everyday.
    • facebook
Re: Musket Caps v. #11's
« Reply #19 on: December 19, 2011, 02:02:32 PM »
Nope. They feed fine. I was leary of the flanges at first but haven't had any problems.
Molôn Labé
Can you skin Grizz?

The opinions expressed in my posts do not represent those of the forum.

Offline Kowsrule30

  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Nov 2009
  • Posts: 3044
Re: Musket Caps v. #11's
« Reply #20 on: December 19, 2011, 02:13:27 PM »
Do you know the brand of your capper????  Maybe I was just getting some cheap crap!!!!   :chuckle:

Offline Machias

  • Trapper
  • Trade Count: (+5)
  • Explorer
  • ******
  • Join Date: Mar 2007
  • Posts: 18937
  • Location: Worley, ID
Re: Musket Caps v. #11's
« Reply #21 on: December 19, 2011, 02:43:15 PM »
What I found with mine was if I tried to load caps that I'd had loaded before, then I started getting them to jam in the capper.  If I load my german musket caps in the capper once, I never have an issue.
Fred Moyer

When it's Grim, be the GRIM REAPER!

Offline grundy53

  • Global Moderator
  • Trade Count: (0)
  • Explorer
  • *****
  • Join Date: Mar 2010
  • Posts: 12860
  • Location: Lake Stevens
  • Learn something new everyday.
    • facebook
Re: Musket Caps v. #11's
« Reply #22 on: December 19, 2011, 02:50:33 PM »
Do you know the brand of your capper????  Maybe I was just getting some cheap crap!!!!   :chuckle:
I can't remember. I will check when I get home.
Molôn Labé
Can you skin Grizz?

The opinions expressed in my posts do not represent those of the forum.

Offline muzbuster

  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Dec 2011
  • Posts: 483
  • Location: Pierce Co.
Re: Musket Caps v. #11's
« Reply #23 on: December 20, 2011, 06:15:43 AM »
Nope. They feed fine. I was leary of the flanges at first but haven't had any problems.
No problems here.

Offline grundy53

  • Global Moderator
  • Trade Count: (0)
  • Explorer
  • *****
  • Join Date: Mar 2010
  • Posts: 12860
  • Location: Lake Stevens
  • Learn something new everyday.
    • facebook
Re: Musket Caps v. #11's
« Reply #24 on: December 20, 2011, 05:16:06 PM »
Do you know the brand of your capper????  Maybe I was just getting some cheap crap!!!!   :chuckle:

Thompson center musket capper
Molôn Labé
Can you skin Grizz?

The opinions expressed in my posts do not represent those of the forum.

Offline Kowsrule30

  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Nov 2009
  • Posts: 3044
Re: Musket Caps v. #11's
« Reply #25 on: December 20, 2011, 06:59:52 PM »
Do you know the brand of your capper????  Maybe I was just getting some cheap crap!!!!   :chuckle:

Thompson center musket capper


Yep.... Mine says something I can't even read..... Thanks....

Offline huntnnw

  • Non-Hunting Topics
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: May 2010
  • Posts: 9633
  • Location: Spokane
Re: Musket Caps v. #11's
« Reply #26 on: December 20, 2011, 11:47:50 PM »
The musket cap nipple has a WAY bigger hole and allows a heck of alot more flame into the powder.  I've never had a misfire with a musket cap.  Used to have quite a few with #11s.  I would never go back.  I only use the German musket caps.

 :yeah:

 


* Advertisement

* Recent Topics

Nevada bull hunt 2025 by Gentrys
[Today at 02:03:15 PM]


Accura MR-X 45 load development by Karl Blanchard
[Today at 01:32:20 PM]


I'm Going To Need Karl To Come up With That 290 Muley Sunscreen Bug Spray Combo by highside74
[Today at 01:27:51 PM]


Toutle Quality Bull - Rifle by lonedave
[Today at 12:58:20 PM]


49 Degrees North Early Bull Moose by washingtonmuley
[Today at 12:00:55 PM]


MA 6 EAST fishing report? by washingtonmuley
[Today at 11:56:01 AM]


Kings by Gentrys
[Today at 11:05:40 AM]


2025 Crab! by ghosthunter
[Today at 09:43:49 AM]


AUCTION: SE Idaho DIY Deer or Deer/Elk Hunt by Dan-o
[Today at 09:26:43 AM]


Survey in ? by hdshot
[Today at 09:20:27 AM]


Bear behavior by brew
[Today at 08:40:20 AM]


Bearpaw Outfitters Annual July 4th Hunt Sale by bearpaw
[Today at 07:57:12 AM]


A lonely Job... by Loup Loup
[Today at 07:47:41 AM]


2025 Montana alternate list by bear
[Today at 06:06:48 AM]


Son drawn - Silver Dollar Youth Any Elk - Help? by Boss .300 winmag
[Yesterday at 09:42:07 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal