collapse

Advertisement


Author Topic: SBE firing pin/spring question  (Read 3006 times)

Offline ducksdogsdownriggers

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Dec 2010
  • Posts: 228
  • Location: Wenatchee
SBE firing pin/spring question
« on: December 15, 2011, 02:59:03 PM »
I have a SBE (not II) that I've prob put 3k rounds through.  Recently I've had 3 rounds misfire, 2 of which left the wad horribly lodged in the barrel.  I called my ammo manufacture and they are replacing my case and want the remaining ammo returned for testing, but they were intent ("95% sure") on the fact that it was my firing pin and/or spring.  They said that Benelli's are notorious for that.  Anyone ever hear of that, or have a similar issue??? 

Offline goosegetter79

  • YAR Member
  • Washington For Wildlife
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Sep 2008
  • Posts: 1624
  • Location: Bainville, MT
Re: SBE firing pin/spring question
« Reply #1 on: December 15, 2011, 03:36:07 PM »
Just curious but why would a firing pin have anything to do with wads being lodged in a barrel. To me that sounds more of a problem with the load, but I really don't know.
"The only thing necessary for the triumph of evil is for good men to do nothing" -Edmund Burke

Offline ducklab

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: May 2011
  • Posts: 54
  • Location: Everett, wa
Re: SBE firing pin/spring question
« Reply #2 on: December 15, 2011, 03:51:14 PM »
I completely agree with goosegetter79. THE ISSUE IS WITH THE LOAD. If the primer went off then the gun was working perfectly. The problem the manufacturer was probably talking about was the "benelli click". This has everything to do with how the bolt is seated. The locking head of the bolt didn't lock into place, this would cause the load not to fire, but the load did fire so you didnt experience the benelli click.

Offline Hi-Liter

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Nov 2011
  • Posts: 1553
  • Location: Snohomish County
Re: SBE firing pin/spring question
« Reply #3 on: December 15, 2011, 04:00:43 PM »
I have a SBE (not II) that I've prob put 3k rounds through.  Recently I've had 3 rounds misfire, 2 of which left the wad horribly lodged in the barrel.  I called my ammo manufacture and they are replacing my case and want the remaining ammo returned for testing, but they were intent ("95% sure") on the fact that it was my firing pin and/or spring.  They said that Benelli's are notorious for that.  Anyone ever hear of that, or have a similar issue??? 

 have the same gun as you SBE (not the II)I ordered new in 03 left handed. I have shot about 6k rounds, give or take. I have never replaced one part on it. Plus, I have never had one problem with it, wet, cold, snow etc. I just make sure to clean it really good after hunting or trap shooting. Especially cleaning the bolt and keeping the firin pin area lubed.
I also reload a lot too. I think in your case there is problem with the load, like the wad in the hull may have been stuck a little or the powder load was insufficient or the primer was damp. You are lucky you didn't run another round through it, I saw two barrels once blow completly apart next to me, it was bad really bad.

What load was it? and Company?

Offline 270Shooter

  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Oct 2008
  • Posts: 3828
  • Location: Yakima
Re: SBE firing pin/spring question
« Reply #4 on: December 15, 2011, 04:08:04 PM »
THats a problem with the load. It doesnt matter how hard the pin hits the primer as long as it is enough to fire the shell.

Offline ducksdogsdownriggers

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Dec 2010
  • Posts: 228
  • Location: Wenatchee
Re: SBE firing pin/spring question
« Reply #5 on: December 15, 2011, 04:10:24 PM »
I completely agree with goosegetter79. THE ISSUE IS WITH THE LOAD. If the primer went off then the gun was working perfectly. The problem the manufacturer was probably talking about was the "benelli click". This has everything to do with how the bolt is seated. The locking head of the bolt didn't lock into place, this would cause the load not to fire, but the load did fire so you didnt experience the benelli click.
Thank you.  That's exactly what I thought!!!

Offline ducksdogsdownriggers

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Dec 2010
  • Posts: 228
  • Location: Wenatchee
Re: SBE firing pin/spring question
« Reply #6 on: December 15, 2011, 04:20:31 PM »

What load was it? and Company?
[/quote]
Hevi-Metal.  I've been shooting that exclusively the past 2+ years, never had a prob until this case.  They are overnighting me a full case, and are paying for the return of my current case returned for testing.  Customer service was great, super fast, no holding. 

Offline ducksdogsdownriggers

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Dec 2010
  • Posts: 228
  • Location: Wenatchee
Re: SBE firing pin/spring question
« Reply #7 on: December 15, 2011, 04:28:18 PM »
Un-ignited powder, unexpanded wad, once wad was removed.   Zero chance for moisture related issues: stored indoors, new box that never been seen the blind. 

Offline h2ofowlr

  • CHOKED UP TIGHT
  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Old Salt
  • ******
  • Join Date: Dec 2008
  • Posts: 9120
  • Location: In the "Blind"! Go Cougs!
Re: SBE firing pin/spring question
« Reply #8 on: December 15, 2011, 04:36:24 PM »
That is damp powder.  You have a moisture issue with the ammo.  Not firing pin or spring.
Cut em!
It's not the shells!  It's the shooter!

Offline goosegetter79

  • YAR Member
  • Washington For Wildlife
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Sep 2008
  • Posts: 1624
  • Location: Bainville, MT
Re: SBE firing pin/spring question
« Reply #9 on: December 15, 2011, 05:23:32 PM »
If it's Hevi-metal you might send a pm to 1morebuck and see what he says.  I think he works for them or something.
"The only thing necessary for the triumph of evil is for good men to do nothing" -Edmund Burke

Offline sakoshooter

  • WFW Board of Directors
  • Trade Count: (+1)
  • Frontiersman
  • *****
  • Join Date: Nov 2009
  • Posts: 3597
  • Location: Puyallup
  • Groups: Life Memberr NRA, Life Member Sumner Sportsmans Association
Re: SBE firing pin/spring question
« Reply #10 on: December 19, 2011, 10:30:09 AM »
If the primer went off, lodging the wad in the barrel, the problem was w/the powder. Maybe wet etc but not the firing pin's problem.
Rhinelander, WI
Home of the Hodag

 


* Advertisement

* Recent Topics

Hoof Rot by MADMAX
[Yesterday at 11:01:20 PM]


Ever win the WDFW Big Game Raffle? by addicted1
[Yesterday at 10:56:29 PM]


Honda BF15A Outboard Problems by Sandberm
[Yesterday at 08:18:08 PM]


Idaho General Season Going to Draw for Nonresidents by JDArms1240
[Yesterday at 08:16:36 PM]


Eastern WA-WT hunting from tree stands?? by addicted1
[Yesterday at 06:47:44 PM]


A question for any FFL holders on here by ryan2202
[Yesterday at 05:01:26 PM]


MA-10 Coho by CP
[Yesterday at 04:14:05 PM]


Bow mount trolling motors by BigGoonTuna
[Yesterday at 01:29:55 PM]


I’m on a blacktail mission by addicted1
[Yesterday at 12:10:11 PM]


where is everyone? by nwwanderer
[Yesterday at 06:01:04 AM]


Wolf documentary PBS by Skyvalhunter
[Yesterday at 05:58:56 AM]


Stuffed Pork Chop by EnglishSetter
[June 07, 2025, 11:12:59 PM]


Another great day in the turkey woods. by Remington Outdoors
[June 07, 2025, 09:43:57 PM]


Buck age by kentrek
[June 07, 2025, 08:56:47 PM]


Oregon special tag info by Judespapa
[June 07, 2025, 08:37:07 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal