Reloading question.

[gasman]

Can Nickel Plated shells be reloaded 

I have heard Yes, No, and Not Recomended, but what is your experiance?

Thanks for your input 

[sirmissalot]

I've reloaded them but they are getting tossed after they are fired (the reloads). The nickel plating can chip off...supposedly, I never had it happen though. My vote would be "not recomended"

[Jack Diamond]

reload them all the time, never a problem, little harder to size than regular "brass" but it works well.

[hillbilli]

yep, reload them with no problems, in rifle and pistol..

[FALFire]

  X 1000

[C-Money]

My Uncle reloads his 7mm rem mag with the nickel cases and molly coated bullets. The silver and black looks cool on a rifle cartridge, but I am in no way a raider fan.

[gasman]

Thanks guys 

[Biggerhammer]

I've reloaded a truck load of them, esspecialy in the WSM's. Never had a issue.

[Helix]

Yes they can be reloaded... I once asked the same question on Shootersforum when I wanted to do the same.  Don't trim them or use them on calibers that need to headspace on the case rim and therfore need to be trimmed.  The Nickle will begin to chip where you trim and then they can ruin your sizer die.  If you see any defect in the nickle do not size it.  it will scratch your die.   

[JackOfAllTrades]

I have about 1000 Speer nickel plated 45acp that I've lost count for how many times they've been reloaded. (45acp normally shrinks when reloaded/shot) I use them for my precision slowfire competition. No problem reloading them. For something like 357 mag or nickel bottle neck cases, they won't last as long as they stretch/resize more. You can still reload them, but won't get as many reloads out of them.

-Steve

[AWS]

I shoot a 223 and a 6mm/223(6x45mm).  I use nickle plated brass for the 223 and brass for the 6mm/223, though they have the same headstamp it is easy to tell them apart.  They reload the same I use good lube(not Oneshot) and have had no problems.

[300rum]

I have reloaded Nickel .38's thousands of times.  I get a split case every now and then and just throw it away.  I have reloaded a few at what would be considered +P and they did fine but the majority has been at low pressure.  I have reloaded quite a few .357's and they have down well also.  I don't hesitate reloading Nickel. 

Can Nickel Plated shells be reloaded 

I have heard Yes, No, and Not Recomended, but what is your experiance?

Thanks for your input 

[gasman]

Gonna reload for a friend, and his .300 Ultra Mag.

[Jack Diamond]

loading for a friend is something that can cause a friendship to evaporate, sometimes it is better to bring the friend to the reloading room and mentor him , while he actually will be seeing the entire process, show him every aspect of reloading, and then help him to reload his own shells.  By doing this you get one more interested in reloading, and God forbid, some stupid thing should happen, he also has a hand in it, rather than it being your fault.  IMHO.

[JackOfAllTrades]

loading for a friend is something that can cause a friendship to evaporate, sometimes it is better to bring the friend to the reloading room and mentor him , while he actually will be seeing the entire process, show him every aspect of reloading, and then help him to reload his own shells.  By doing this you get one more interested in reloading, and God forbid, some stupid thing should happen, he also has a hand in it, rather than it being your fault.  IMHO.

Very well said! Remove your liability from the situation.

I will teach and let my friends/relatives use my equipment a few times. Then they need to buy their own. I don't reload for anyone but my immediate family.

-Steve