collapse

Advertisement


Author Topic: Making pepperoni sticks  (Read 10271 times)

Offline lokidog

  • Trade Count: (+6)
  • Explorer
  • ******
  • Join Date: Mar 2009
  • Posts: 15145
  • Location: Sultan/Wisconsin
Re: Making pepperoni sticks
« Reply #15 on: January 09, 2012, 10:30:43 PM »
I wish I could get mine below 225.....  I think I need a different propane valve or something?

Offline huntergreg

  • Washington For Wildlife
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Nov 2009
  • Posts: 1364
  • Location: Ellensburg
  • Washington For Wildlife
Re: Making pepperoni sticks
« Reply #16 on: January 09, 2012, 10:55:12 PM »
I wish I could get mine below 225.....  I think I need a different propane valve or something?

Does yours have vents on the sides and top?  Mine on low gets a little to warm depending on the weather outside. I have to open and close them off and on to keep a certain temp.  :dunno:   You should be able to look at the flame and be able to tell if the flame gets smaller or bigger when you turn the gas on more or less. I would check and make sure it is going to the lowest setting. What kind of smoker is it??



I have a Smoke Hollow gas smoker and love the thing. Wish I had a bigger one when I do snack stix but This one works great.

Offline lokidog

  • Trade Count: (+6)
  • Explorer
  • ******
  • Join Date: Mar 2009
  • Posts: 15145
  • Location: Sultan/Wisconsin
Re: Making pepperoni sticks
« Reply #17 on: January 10, 2012, 09:20:15 AM »
Smokevault.  The dial is on low, and I turn the valve on the tank to almost the off position.  I have the vents open and I try to only smoke on cold days.  One problem was that on low, there was not enough heat to smoke the chips when the cast iron chip tray was in its suspended position.  I now lay the tray directly over the burner hole so I get plenty of smoke but it is really hot.  It works great for doing a turkey or a venison top sirloin, but it is a bit hot for the way I like my smoked salmon, dry but not crunchy....   :)  Seemed to work well for the pepperoni we did.  Maybe I'll just have to use the Little Chief for doing fish.

Offline The Weazle

  • Weird...
  • Non-Hunting Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Jan 2008
  • Posts: 1486
  • Location: Oak Harbor
Making pepperoni sticks
« Reply #18 on: January 10, 2012, 07:05:45 PM »
Loki,
Plug every other hole in the burner with a nail, or brad.  It will reduce the heat, And still burn the chips.  Half the flame/half the heat...sort of anyways.
Sexually deprived for your Freedom!
Beer, It's not just for breakfast anymore!

I have a B.S. in B.S.

Offline lokidog

  • Trade Count: (+6)
  • Explorer
  • ******
  • Join Date: Mar 2009
  • Posts: 15145
  • Location: Sultan/Wisconsin
Re: Making pepperoni sticks
« Reply #19 on: January 10, 2012, 09:08:15 PM »
I'll try that, seems like there would be twice as much gas coming out ofr half as many holes = same amount of flame?  Thanks for the tips.

Offline Cap.Silver

  • My love is the outdoors
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Sep 2010
  • Posts: 1250
  • Location: US/DE/CZ
  • If not fishing then hunting
Re: Making pepperoni sticks
« Reply #20 on: January 10, 2012, 09:46:10 PM »
Ed,if you have the burner like turkey fryer ,remove the upper part where the screw is and make the hole smaller (I used a washer -decreasing the size of the hole where the gas comes in ) or try to plug up some holes or lay piece of sheet metal over half of the burner to see if you can make the flame smaller ....
Everyone thinks that I'm freak ,I don't look different do I ?

Offline sirfunkeybut

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Sep 2009
  • Posts: 1308
Re: Making pepperoni sticks
« Reply #21 on: January 10, 2012, 10:05:13 PM »
Well, my night of getting the stick stuffed was stopped to make a trip to the E.R. The miss got her finger into the grinder, luckily it didn't do much as it was only a self crank grinder. It broke the nail and that was about it. Pics to follow if anyone wants to see? Be CAREFUL when using your grinder

Offline huntergreg

  • Washington For Wildlife
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Nov 2009
  • Posts: 1364
  • Location: Ellensburg
  • Washington For Wildlife
Re: Making pepperoni sticks
« Reply #22 on: January 11, 2012, 12:42:16 AM »
Well, my night of getting the stick stuffed was stopped to make a trip to the E.R. The miss got her finger into the grinder, luckily it didn't do much as it was only a self crank grinder. It broke the nail and that was about it. Pics to follow if anyone wants to see? Be CAREFUL when using your grinder

 :yike:  Sorry to hear that.

 


* Advertisement

* Recent Topics

Local Beast by RB
[Today at 10:43:02 PM]


Women Losing Her Mind Over Duck Hunters by 2MANY
[Today at 10:34:44 PM]


What are some good 12 ga factory loads for predators? by MADMAX
[Today at 09:13:33 PM]


Chains on gmc 2500hd by EnglishSetter
[Today at 08:23:47 PM]


Looking for a Left Hand Diamond Infinite Edge by Wood2Sawdust
[Today at 07:33:01 PM]


Know Where To Hunt Club by Tbar
[Today at 05:46:36 PM]


2026 Sheds “Found one” by Pathfinder101
[Today at 01:54:24 PM]


Tell me about the 6mm Remington by JDHasty
[Today at 01:23:11 PM]


Please Report Problems & Bugs Here by jackelope
[Today at 11:34:33 AM]


Commercial Huckleberry Picking Survey--Gifford Pinchot by 2MANY
[Today at 09:36:46 AM]


Hearing Protection/Amplification by JDHasty
[Yesterday at 08:54:05 PM]

SimplePortal 2.3.7 © 2008-2026, SimplePortal