collapse

Advertisement


Author Topic: Almost time to play at 1K.  (Read 6989 times)

Offline Biggerhammer

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Jun 2011
  • Posts: 5142
  • Location: Central Washington
  • Powder, primer, bullet JUNKIE.
Re: Almost time to play at 1K.
« Reply #30 on: February 02, 2012, 06:09:20 PM »
Very nice hammer, lots o sexy in that rig, but i have to ask, why the bfu bolt knob????

Makes for easier driving in the fast lane. :tup: It's also threaded, so I can change it out with any style I wish. I can run my smaller Kampfeld hunter knob if I like.

I just finished my jig to install the bfu knobs.

 

Looking good!  :tup: I have a couple more to screw together and some that need bolt knobs right now. Are you up and running yet as in ready to receive bolts for the mod?

Offline Biggerhammer

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Jun 2011
  • Posts: 5142
  • Location: Central Washington
  • Powder, primer, bullet JUNKIE.
Re: Almost time to play at 1K.
« Reply #31 on: February 02, 2012, 06:10:18 PM »
The gun looks cool, but I know hardly anything when it comes to parts and all that. So my question is...Where the hell do you go to shoot at 1k yards?!

In my back yard. :tup:

Offline Biggerhammer

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Jun 2011
  • Posts: 5142
  • Location: Central Washington
  • Powder, primer, bullet JUNKIE.
Re: Almost time to play at 1K.
« Reply #32 on: February 02, 2012, 06:23:24 PM »
Still waiting on Leupold, I couldn't take it anymore. So I just mounted up a scope  I had and I'm going to break the barrel in tomorrow with some Sierra 160 BTSP, Hornady 162 BTSP, Nosler 160 Partition. All on top of 64grs of H4831SC, all seated for a .010 " Jump ".

I'll check velocities and accuracy from there and adjust accordingly. :) I fired one round out of it yesterday, so I could use the spent cartridge for my AOL. Recoil was NOTHING, it's a total pus sy cat. A nice change from that 450 Ultra Magnum. ;)

« Last Edit: February 02, 2012, 06:29:51 PM by Biggerhammer »

Offline high country

  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: May 2007
  • Posts: 5133
Re: Almost time to play at 1K.
« Reply #33 on: February 02, 2012, 06:31:57 PM »
Very nice hammer, lots o sexy in that rig, but i have to ask, why the bfu bolt knob????

Makes for easier driving in the fast lane. :tup: It's also threaded, so I can change it out with any style I wish. I can run my smaller Kampfeld hunter knob if I like.

I just finished my jig to install the bfu knobs.

 

Looking good!  :tup: I have a couple more to screw together and some that need bolt knobs right now. Are you up and running yet as in ready to receive bolts for the mod?

Just about, I want to try a new style cutter that takes all the thinking out of it so I can set it and forget it. I am designing a savage jig right now too. I know, who would spend $50 on a savage.

Offline swanny

  • Washington For Wildlife
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Sep 2008
  • Posts: 1852
  • Location: Kent
    • 9to5active
Re: Almost time to play at 1K.
« Reply #34 on: February 02, 2012, 07:50:05 PM »
The gun looks cool, but I know hardly anything when it comes to parts and all that. So my question is...Where the hell do you go to shoot at 1k yards?!

In my back yard. :tup:

That works. And i'm jealous of your back yard  :tup:

 


* Advertisement

SimplePortal 2.3.7 © 2008-2025, SimplePortal