Recipes for reloading for 300 RUM

[Huntboy]

Does anybody have any they currently use. And are you willing to share them.

Thanks, Scott

[BULLBLASTER]

Last year I was shooting 90 grains retumbo with 210 Berger CCI 250 and oal of 3.69 was a fairly mild load but shoots under 0.5 moa. I'm having some work done to my rifle and have some.215 Berger's loaded up for load development when it comes back. I couldn't get 200 accubonds and retumbo much under moa but didn't try all that hard. Ill save the 200 accubonds for my 06.

[MDGrand]

210 Berger VLD
Nosler Brass
Fed GM 215 primer
RL 25 - 87.9 grains
seated -0.02 from the lands

MOA for me.

[hoyt2002]

165 gr. accubond
remington brass
remington 9m primers
90 grains of imr7828

In my rifle it shoots moa. I killed a buck and a spike bull with them this year. This is a max load in the Nosler loading book so start low and work you way up. good luck.

[johnnyaustin44]

I shoot almost the same load as bullblaster with the exception of 180 grain nosler accubond instead of the Berger. shoots well outta my Browning

[Huntboy]

Thank you for the help, Gentlemen.

[Jamieb]

My rifle loves 95.5gr of retumbo under a 200gr accubond. 95,5gr is too much for a couple of freinds rifles but I'm not seeing any press. signs and the brass is lasting at least 10 fireings.

[hunting4sanity]

Remington 700 in 300RUM
Retumbo 90.8grs
Berger VLD 210grs
Fed 215M primers
Remington brass loaded to 3.665"

[Huntboy]

Anybody load imr 4350 for the 300 RUM.

[Biggerhammer]

165 gr. accubond
remington brass
remington 9m primers
90 grains of imr7828

In my rifle it shoots moa. I killed a buck and a spike bull with them this year. This is a max load in the Nosler loading book so start low and work you way up. good luck.

I bet that is one flat shooting load!   Your smoking that 165 out there.

[JimmyHoffa]

Remington brass
Primer Remington 9 1/2M
165 gr Swift Scirocco
101.2 gr Retumbo

[BULLBLASTER]

I have only tried retumbo in my rum. I use imr  4350 in most other calibers though. 243 7 mag and 30-06

[Jamieb]

IMR and H-4350 are too fast for the RUM

[BULLBLASTER]

IMR and H-4350 are too fast for the RUM

That's what I was thinking. But may work with light bullets. I like heavy bullets for my RUM.

[high country]

I use 7828 with good results when I was loading xlc's and sgk's. It produced good accuracy and velocity. My personal favorite load is 110gr 8700 under a 180tsx. It's a real pleasure in a 6lb gun too....lol.