collapse

Advertisement


Author Topic: Long awaited finally looking to come true  (Read 3620 times)

Offline 204chucknorris

  • Team Maybe next time
  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Nov 2010
  • Posts: 212
  • Location: in the sage far away.
Long awaited finally looking to come true
« on: March 17, 2012, 10:41:02 AM »
I have been wanting a 6.5x284 savage for about 2years now. I ran across a target version about 6monthsthe ago but couldn't step up. I called to check if they still had it and WOW they did and it went down to 850! This will make a great addition to the Pdog hunt, not to mention a awesome long range coyote gun. Something about fat barreled heavy guns gets me excited.

Offline Biggerhammer

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Jun 2011
  • Posts: 5142
  • Location: Central Washington
  • Powder, primer, bullet JUNKIE.
Re: Long awaited finally looking to come true
« Reply #1 on: March 17, 2012, 12:49:23 PM »
Great cartridge, its on my all time favorite top five list. The 95 gr V-max's make for some wicked fun when it comes to shooting Chucks and the new 140 Accubond should be the ticket for anything with four legs around here.

Offline 204chucknorris

  • Team Maybe next time
  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Nov 2010
  • Posts: 212
  • Location: in the sage far away.
Re: Long awaited finally looking to come true
« Reply #2 on: March 18, 2012, 07:31:38 AM »
Great cartridge, its on my all time favorite top five list. The 95 gr V-max's make for some wicked fun when it comes to shooting Chucks and the new 140 Accubond should be the ticket for anything with four legs around here.
95gr flax? Sounds interesting. I have only been looking at the 123 etc. Bighammer, if you don't mind me asking what model is yours?

Offline rasbo

  • Trade Count: (+1)
  • Legend
  • ******
  • Join Date: Aug 2008
  • Posts: 20144
  • Location: Grant county
  • In God I trust...Try taking that away from me!
Re: Long awaited finally looking to come true
« Reply #3 on: March 18, 2012, 07:42:15 AM »
what is that caliber like compared to a 6mm??

Offline high country

  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: May 2007
  • Posts: 5133
Re: Long awaited finally looking to come true
« Reply #4 on: March 18, 2012, 10:29:55 AM »
what is that caliber like compared to a 6mm??

Take a 284 and neck it down. its about 10ish grains more in capacity.

Offline Biggerhammer

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Jun 2011
  • Posts: 5142
  • Location: Central Washington
  • Powder, primer, bullet JUNKIE.
Re: Long awaited finally looking to come true
« Reply #5 on: March 18, 2012, 11:12:18 AM »
Great cartridge, its on my all time favorite top five list. The 95 gr V-max's make for some wicked fun when it comes to shooting Chucks and the new 140 Accubond should be the ticket for anything with four legs around here.
95gr flax? Sounds interesting. I have only been looking at the 123 etc. Bighammer, if you don't mind me asking what model is yours?

My first one I had built in a tactical model by McMillan. I had it built on a Rem700 long action, McMillan A4 , 26"  9 twist , Schnieder barrel and a Vais Arms brake. I sold that rifle to a board member here years ago( Jim The Plumber) Other than his factory .308's, that was his first true long range rifle. That rifle would average 2- 2 1/2 inches for five shots at 600 yards with the 95gr V-Max's . It would average 7" at a 1011 yards with the Sierra 142's for five shot groups. I had welded up a 4' x 8' steel tube frame and put it at the East Wenatchee gun club, we would stand it up and then lay it back down when we were finished shooting. Where we put it just turned out to be a 1011 yards from the bench.

My second 6.5-284 I had built by Bryant Custom, built on a Rem700 long action, McMillan A5 and a 30"inch 8.5 twist  fluted Krieger, fluted bolt, Jewell trigger, Sako extractor, Badger Ord rings, Vais Arms brake.The rings look tall but they needed to clear a Nightforce 8-32x56 NXS. I shot strictly 284 brass necked down. Mike still has a picture of my rifle on his photo gallery on his web site. All the metal but the Badger Ordnance bolt knob was finished in Birdsongs Black-T Teflon finish in OD  green.

I also had Mike take a new Remington 700 Classic I found chambered in 6.5x55 and rechamber it to 6.5-284 Norma and it shot like a house of fire.



With the weight of the heavier barrel contours and the Vais Brake, recoil is almost non existent, the rifle barely moves at all and that movement is straight back, even on the scopes highest power settings I could watch my hits on chucks at 100 yards.
« Last Edit: March 18, 2012, 11:34:46 AM by Biggerhammer »

Offline deerslyr

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Nov 2007
  • Posts: 1979
  • Location: Clyde Park MT via Roy WA
Re: Long awaited finally looking to come true
« Reply #6 on: March 18, 2012, 01:06:11 PM »
You have so many dam custom guns hammer. It makes a guy jealous lol

Offline romaknows

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Apr 2009
  • Posts: 347
Re: Long awaited finally looking to come true
« Reply #7 on: March 18, 2012, 01:10:25 PM »
nice!!
high country rules!

Offline 204chucknorris

  • Team Maybe next time
  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Nov 2010
  • Posts: 212
  • Location: in the sage far away.
Re: Long awaited finally looking to come true
« Reply #8 on: March 18, 2012, 07:58:21 PM »
Great cartridge, its on my all time favorite top five list. The 95 gr V-max's make for some wicked fun when it comes to shooting Chucks and the new 140 Accubond should be the ticket for anything with four legs around here.
95gr flax? Sounds interesting. I have only been looking at the 123 etc. Bighammer, if you don't mind me asking what model is yours?

My first one I had built in a tactical model by McMillan. I had it built on a Rem700 long action, McMillan A4 , 26"  9 twist , Schnieder barrel and a Vais Arms brake. I sold that rifle to a board member here years ago( Jim The Plumber) Other than his factory .308's, that was his first true long range rifle. That rifle would average 2- 2 1/2 inches for five shots at 600 yards with the 95gr V-Max's . It would average 7" at a 1011 yards with the Sierra 142's for five shot groups. I had welded up a 4' x 8' steel tube frame and put it at the East Wenatchee gun club, we would stand it up and then lay it back down when we were finished shooting. Where we put it just turned out to be a 1011 yards from the bench.

My second 6.5-284 I had built by Bryant Custom, built on a Rem700 long action, McMillan A5 and a 30"inch 8.5 twist  fluted Krieger, fluted bolt, Jewell trigger, Sako extractor, Badger Ord rings, Vais Arms brake.The rings look tall but they needed to clear a Nightforce 8-32x56 NXS. I shot strictly 284 brass necked down. Mike still has a picture of my rifle on his photo gallery on his web site. All the metal but the Badger Ordnance bolt knob was finished in Birdsongs Black-T Teflon finish in OD  green.

I also had Mike take a new Remington 700 Classic I found chambered in 6.5x55 and rechamber it to 6.5-284 Norma and it shot like a house of fire.



That's awesome. I just actually got the green light from the wife so I am pretty excited.  Went shooting today at a small area and played at 600 the with my AR15 and my 7mm. I am excited to get the new addition and play.

With the weight of the heavier barrel contours and the Vais Brake, recoil is almost non existent, the rifle barely moves at all and that movement is straight back, even on the scopes highest power settings I could watch my hits on chucks at 100 yards.

Offline 204chucknorris

  • Team Maybe next time
  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Nov 2010
  • Posts: 212
  • Location: in the sage far away.
Re: Long awaited finally looking to come true
« Reply #9 on: March 18, 2012, 08:01:53 PM »
I have been wanting to play more at 600 with my AR15 and today was a good start. I will be reloadingsome some more this week for next weekend. Not to mention waiting for my other scope to come back from warranty so I can install on the new addition.  The future is sounding better all the time.

Offline 204chucknorris

  • Team Maybe next time
  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Nov 2010
  • Posts: 212
  • Location: in the sage far away.
Re: Long awaited finally looking to come true
« Reply #10 on: March 20, 2012, 07:22:17 PM »
I am so excited as today I put my deposit on my new rifle. I can't wait for the next few weeks to pass when I can pick it up!!!!!!!!!!

 


* Advertisement

* Recent Topics

11th Annual 'Pull For Scouting' Clay Crushing Classic by high_hunter
[Today at 12:27:18 AM]


AKC lab puppies! Born 06/10/2025 follow as they grow!!! by high_hunter
[Today at 12:21:33 AM]


Ritzville Rifle Buck - GMU 284 by high_hunter
[Yesterday at 11:49:16 PM]


Antlerless Moose more than once? by shootem
[Yesterday at 11:25:51 PM]


Nooksack Muzzleloader Bull Tag by high_hunter
[Yesterday at 10:42:24 PM]


2025 Draw Results by kramman
[Yesterday at 10:27:20 PM]


My wife drew quality deer DESERT rifle 10/18-10/26!!!!! by high_hunter
[Yesterday at 10:17:15 PM]


Palouse buck deer by blumtnelkndeer
[Yesterday at 10:14:00 PM]


Drew Quality by Jimmer
[Yesterday at 09:34:00 PM]


Nevada guide draw Mule Deer by Beastmonger1987
[Yesterday at 09:33:34 PM]


Quality Swakane by Rainier10
[Yesterday at 09:09:17 PM]


Son drawn - Silver Dollar Youth Any Elk - Help? by VickGar
[Yesterday at 09:06:22 PM]


Observatory quality bull rifle by buglebuster
[Yesterday at 09:00:02 PM]


Anterless 1334 muzzle loader by Bdawg
[Yesterday at 08:46:31 PM]


A little Martini Cadet varmint rifle I have been working on by JDHasty
[Yesterday at 08:43:33 PM]


Pogue Quality by geauxtigers
[Yesterday at 08:38:35 PM]


Bow mount trolling motors by Happy Gilmore
[Yesterday at 08:06:18 PM]


2025 OILS! by HUNTNORTHWEST
[Yesterday at 07:46:27 PM]


A question for any FFL holders on here by Knocker of rocks
[Yesterday at 07:34:49 PM]


Last year putting in… by MADMAX
[Yesterday at 07:25:41 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal