Fletching jig question

[DoubleJ]

For the past few years, I have been using the Quickfletch Twisters or Quickspins and have been happy with everything except the price.  I would like to try jigging on my own but I am looking for one jig that can do Blazers - 4" vanes, straight and helical, and not as important but the ability to do 3 vanes and 4 vanes would be really nice as well.   Does such a device exist?

[hughjorgan]

Bitzenburger

http://www.bitzenburger.com/

[huntergreg]

Bitzenburger

http://www.bitzenburger.com/

     Best jig in my opinion! 

[gasman]

Have you looked at the Arizona Fletcher? I have one ans use it often.

[Jason]

Another vote for the Bitzenburger

[pianoman9701]

I use the Jojann fletcher and do 6 arrows at a time, 3 or 4 vanes. It's problematic with 2" vanes. 4" is fine.

[mallard79]

Another vote for the Bitzenburger

 

The only way to go imo!

[carpsniperg2]

I run a martin j8. Great jig and works great. I do 6 fletch 4 fletch and 2 fletch very easy with mine.

[jechicdr]

Wanted the same thing.  Am returning the Bitzenburger I bought.  The helix on the Bitzenburger is minimal to none with Blazer vanes.  The Bohning will give you 3 degree helix that actually works fine.  I have that one, but bought the Bitz to try and do 4 helicals and was quite disappointed.  Wish someone would make a 90 degree helical for Blazers.

[ridgefire]

i bought  the bitz jig and have had nothing but problems with it. my brother uses a much cheaper jig, i think its made by bohning and it works better imo

[lokidog]

I just picked up a pair of Jo Jans, one has a straight clamp and one has a helical.  I've done some 3" fusions in helical and they seem to have a pretty good curve to them.  Adjusting the shaft back and forth seems like a bit tricky of a deal.  If I can get the fletch glue to work and my rest to function properly, it should be good.  Bought some Goat Tuff today so will try theat if my last ones don't work.

[hughjorgan]

Wanted the same thing.  Am returning the Bitzenburger I bought.  The helix on the Bitzenburger is minimal to none with Blazer vanes.  The Bohning will give you 3 degree helix that actually works fine.  I have that one, but bought the Bitz to try and do 4 helicals and was quite disappointed.  Wish someone would make a 90 degree helical for Blazers.

I have a helix as well, it works good, although it is made completely out of plastic.

[Snapshot]

I have a JoJan multi-fletch that works well for me; and I think it would fit your criteria nicely.

[DoubleJ]

Any thoughts on the Arizona E-Z Fletch?

http://ezfletch.com/product.php?productid=2&cat=1&page=1

[hughjorgan]

Any thoughts on the Arizona E-Z Fletch?

Spend the little bit of extra money and get the bitzenburger. There is a reason pros ops choose this jig over others...