While the wife is away I'll play..

[seth30]

The wife and kid are in portand till Monday, and I decided to break the silence around here by doing some projects I have wanted to do but didnt have time in the past for.     I made a few  trays for my reloading bench and for a few friends tha reload. I used plywood and drilled 25 holes per tray.  I know a few holes are slighly offcenter but other than that, I believe they will work great, and my friends will be stoked to get a couple. 

[NW-GSP]

that is a good idea, never thought of making them myself

[seth30]

Your welcome,  Im going to make a block for my 223, 30.06, and 357 rounds tomorrow

[724wd]

you might look for a fostner bit.  you won't get the deep pilot hole of the paddle bit and they cut super clean.  looks like a nice project!

[wadu1]

I've done the same thing for reloading my waterfowl shells. If you use a fostner bit like 742 said it will come out a lot cleaner.

[seth30]

Is that a special bit, or can one pick it up at any ace or homedepot?  Thanks for all the kind comments guys    I used two of the blocks today a few times and produced a case of shells using my recipe and #2 steel shot.

[724wd]

either place should have them.  harbor freight also has cheapy kits

[Blacktail Sniper]

They look like this and work slick for what you are doing!

[seth30]

Thanks for the help guys!