collapse

Advertisement


Author Topic: bullet seating depth?  (Read 1908 times)

Offline logan

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Mar 2009
  • Posts: 45
  • Location: buckley,wa
bullet seating depth?
« on: June 07, 2012, 06:18:21 PM »
I'm reloading a 300 win mag with barns 168 tsx btls. I'm using a hornady press and die. and my overall length is 2.920. to finish what i started i had to buy a new box of bullets. when i reloaded those i was getting 2.922-2.925. so i check every thing i could think of does anybody have any suggestions.

Offline wsmnut

  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Dec 2008
  • Posts: 449
  • Location: Twisp, WA
Re: bullet seating depth?
« Reply #1 on: June 07, 2012, 06:32:55 PM »
Are you using a bullet comparator for measuring?  Or are you
measuring the over all length?  I am going to guess you are using COL.
Bullet lengths vary, and since the tip doesn't engage the rifling, it's not
important unless your cartridge won't fit in the magazine.
     Find a comparator for .30 caliber and you'll be a lot more precise.

Good Luck

wsmnut
Wsmnut


Belief is so often the death of reason.
Moron Lube

Offline Biggerhammer

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Jun 2011
  • Posts: 5142
  • Location: Central Washington
  • Powder, primer, bullet JUNKIE.
Re: bullet seating depth?
« Reply #2 on: June 07, 2012, 06:57:37 PM »
Is your die set up to seat off the tip or the ogive? You will always have that problem if your seating off the tip and measuring overall length. Get a comparator, measure off the ogive. Set it and forget it.

Offline JackOfAllTrades

  • Rasbo said I Ain't Right.
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Feb 2009
  • Posts: 6509
  • Location: Lynden, WA.
  • Μολὼν λαβέ
Re: bullet seating depth?
« Reply #3 on: June 07, 2012, 07:07:04 PM »
Agree'd..

Make the loaded cartridge fit in the magazine and move freely so it cycles through the action to chamber.

For the beginning reloader, I suggest that the OAL, is really a measurement from the case base to the ogive where it would contact the lands of the bore. Learn how to do this.  (Bullet comparator)   Backing off .005-.009" from the lands is a good place to start and will likely be quite close to the OAL (sammi) spec in the book.

That said, the barns 168 tsx is not a lead exposed bullet so measured bullet length should be quite consistent. (measure a bunch of the bullets and come up with an average length out of one lot/box.)

Your loaded cartridges should not vary more than +-.003".  If you're loading for hunting purposes and not long range sniping, then you'll never notice +-.005" difference having an effect on accuracy.

-Steve
The NRA says I'm a Master!
Colt's, Ruger's, Dan Wesson, & Kimber are my friends!
Proud to be a U.S. Navy Veteran.

If you never follow your dreams, you'll never go anywhere.

Critical thinking keeps people from freaking the hell out every time some half baked blogger forgets his meds. Unlike some of you, I do not have TawkethOutOfAnus© syndrome.

Offline JackOfAllTrades

  • Rasbo said I Ain't Right.
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Feb 2009
  • Posts: 6509
  • Location: Lynden, WA.
  • Μολὼν λαβέ
Re: bullet seating depth?
« Reply #4 on: June 07, 2012, 07:16:07 PM »
Why is it that new reloaders must spend hard earned cash on premium bullets?  To the rest of the readers, ... Remington Power Points bulk packed at Cabelas are less than half the price to practice/learn with.

-Steve
The NRA says I'm a Master!
Colt's, Ruger's, Dan Wesson, & Kimber are my friends!
Proud to be a U.S. Navy Veteran.

If you never follow your dreams, you'll never go anywhere.

Critical thinking keeps people from freaking the hell out every time some half baked blogger forgets his meds. Unlike some of you, I do not have TawkethOutOfAnus© syndrome.

Offline Biggerhammer

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Jun 2011
  • Posts: 5142
  • Location: Central Washington
  • Powder, primer, bullet JUNKIE.
Re: bullet seating depth?
« Reply #5 on: June 07, 2012, 07:37:11 PM »
Why is it that new reloaders must spend hard earned cash on premium bullets?  To the rest of the readers, ... Remington Power Points bulk packed at Cabelas are less than half the price to practice/learn with.

-Steve

What?? I'm supposed to be shooting something other than Barnes???   :chuckle: :chuckle: :chuckle: :chuckle:

Offline JackOfAllTrades

  • Rasbo said I Ain't Right.
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Feb 2009
  • Posts: 6509
  • Location: Lynden, WA.
  • Μολὼν λαβέ
Re: bullet seating depth?
« Reply #6 on: June 07, 2012, 07:39:53 PM »
No secret that you're not a beginner... ;)

-Steve
The NRA says I'm a Master!
Colt's, Ruger's, Dan Wesson, & Kimber are my friends!
Proud to be a U.S. Navy Veteran.

If you never follow your dreams, you'll never go anywhere.

Critical thinking keeps people from freaking the hell out every time some half baked blogger forgets his meds. Unlike some of you, I do not have TawkethOutOfAnus© syndrome.

Offline logan

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Mar 2009
  • Posts: 45
  • Location: buckley,wa
Re: bullet seating depth?
« Reply #7 on: June 07, 2012, 08:55:26 PM »
i did not think to measure the actual bullet. thanks for the info.

 


* Advertisement

* Recent Topics

People on Cams by netcoyote
[Today at 08:48:39 PM]


Drew Quality by blindluck
[Today at 08:45:49 PM]


Greenriver quality Elk permit by IDWAHunt
[Today at 07:54:08 PM]


Steel Targets??? by bowman
[Today at 07:41:07 PM]


Norway Pass Bull by furbearer365
[Today at 06:46:49 PM]


Is FS70 open? by CarbonHunter
[Today at 06:08:08 PM]


Fun little Winchester 1890 project by Dan-o
[Today at 04:24:08 PM]


Cowiche Quality Buck by muleyslayer
[Today at 03:58:24 PM]


Idaho unit 76 cow elk Oct 25 to Nov 15 by bornhunter
[Today at 02:11:35 PM]


Selkirk bull moose. by lewy
[Today at 10:34:16 AM]


No trespassing, hunting, fishing signs posted along Skykomish river by jackelope
[Today at 10:11:26 AM]


Sheep Ewe - Whitestone Sheep Unit 20 by geauxtigers
[Today at 09:55:59 AM]


2025 OILS! by geauxtigers
[Today at 09:14:25 AM]


Looking for English Pointer pup (Elhew and/or Guard Rail lines) by Tafinder
[Today at 07:22:10 AM]


Buying pheasants for training by trapp01
[Yesterday at 08:44:40 PM]


Mt. Spokane North Moose by Farmer72
[Yesterday at 08:12:24 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal