Hunting Washington Forum

Classifieds & Organizations => Weapons & Parts Classifieds => Topic started by: robescc on February 27, 2021, 06:45:05 PM

Title: FS: Custom R700 from Benchmark Barrels Price Reduced
Post by: robescc on February 27, 2021, 06:45:05 PM
I need to thin the herd. I know I'll regret this later but here it goes:

First up is a rifle that I had Bechmark Barrels build for me off of a Remington 700 long action. This rifle is a tack driver and is 1/2 MOA all day long. I have shot several 1" groups at 300 yards. Round count is less than 150. It shoots 168 grain Nosler long range partitions and Bergers like freaking laser beams. I have killed a pig, two elk and several deer with it.
- 7mm Winchester Short Mag, stainless barrel and Mini Muscle Brake. A match grade reamer was used.
- Action was blueprinted and trued
- Bolt face was opened up and an M16 extractor added
- Matte black Duracoat finish that was done by a friend of mine that did the finishing for Benchmark for a while. A little worn from my backpack scabbard. This rifle has seen some backcountry miles!
- Kwik Klip detachable magazine with a three round mag and one or two 10 round mags if I can find them
- Tuned factory trigger, 2.5 lbs if I remember correctly
- Epoxy bedded action in a Bell & Carlson Alaska Wilderness stock with a bedded full aluminum block
- EGW 20 moa picatinny rail and Vortex Precision Match 30mm rings
- Vortex Viper PST 6-24x50, FFC with a ERB-2C reticle, model PST-43127. I have the original box
- I have maybe 20 rounds of my reloads and 50 or so twice fired brass.
No need to build what is already done $2250 OBO


Title: Re: FS: Rem 700, AR-15 and Stevens 311C
Post by: robescc on March 04, 2021, 07:53:02 AM
I'm open to offers.
Title: Re: FS: Rem 700, AR-15 and Stevens 311C
Post by: Harleysboss on March 04, 2021, 08:22:07 PM
Can you tell me what the sxs barrels are choked at? IC, Mod, full? Thanks.
Title: Re: FS: Rem 700, AR-15 and Stevens 311C
Post by: mudflat mike on March 05, 2021, 12:27:14 PM
Sent ya a PM
Title: Re: FS: Rem 700 and AR-15
Post by: robescc on March 08, 2021, 09:39:24 PM
Iíll be in Yakima on Wednesday and Cle Elum on Thursday if anyone is interested in looking at what I have left.
Title: Re: FS: Rem 700 and AR-15
Post by: Weatherby92 on March 08, 2021, 10:21:39 PM
Whats the weight of the 7wsm? Is the barrel 26 inches?
Looks like an awesome set up.
Title: Re: FS: Rem 700 and AR-15
Post by: robescc on March 09, 2021, 08:31:59 AM
Whats the weight of the 7wsm? Is the barrel 26 inches?
Looks like an awesome set up.

It is 9.6 lbs, same as most factory rifles with a scope. I went with a 24" barrel because the 26" plus a brake is getting really long and didn't suite my purposes. Plus I didn't see a big enough advantage of the extra two inches when you can still get over 3000 fps out of a 24" barrel.

Title: Re: FS: Rem 700 and AR-15
Post by: robescc on April 12, 2021, 02:36:51 PM
Back to the top. Iím open to reasonable offers.
Title: Re: FS: Rem 700 and AR-15
Post by: robescc on April 13, 2021, 02:27:50 PM
AR is sold.