collapse

Advertisement


Author Topic: hardshell clamming  (Read 13865 times)

Offline highmuley

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Sep 2010
  • Posts: 615
  • Location: Republic
hardshell clamming
« on: April 15, 2015, 10:03:27 AM »
Good morning all,

The woman and I are looking to collect some hardshell clams but are unsure on where. We regularly razor clam in grayland. I know willapa bay offers some opportunity. Any advice on beaches and techniques would be greatly appreciated. Thanks in advance folks.
Its the goin'.....Not the gettin'

Offline lokidog

  • Trade Count: (+6)
  • Explorer
  • ******
  • Join Date: Mar 2009
  • Posts: 15186
  • Location: Sultan/Wisconsin
Re: hardshell clamming
« Reply #1 on: April 15, 2015, 10:39:32 AM »
Many moons ago, and a decade or so added in, I dug steamers with some friends somewhere off HWY 105 on the north end of Willapa Bay.  Sorry I can't be more helpful than that.  As the tide goes out, watch for little siphon sprays and dig/rake there.  Or, just look for siphon holes, they are quite small for steamers.  Once you find a patch, dig parallel to the water.  From my experience, the Manilas are not deeper than 6 inches, but others might have different ideas on that.  Remember to bring a gauge as there is a minimum size on them.

Offline Carp Commander

  • WA State Trappers Association
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Jun 2012
  • Posts: 541
  • Location: Tri-Cities, WA
  • Groups: Washington Bowfishing Association
Re: hardshell clamming
« Reply #2 on: April 15, 2015, 11:35:52 AM »
Willapa Bay is one of my favorites. Follow the link below for directions. No shovel needed just a good rake and not a leaf rake. Make sure and double check for health department closures. At Willapa you do not need a minus tide just be there about two hours before low tide and follow it out. You will be surprised how quickly you get limits. Concentrate around patches of smaller gravel. I will be over there in May so let me know how you do.

Nemah is my favorite spot.

http://wdfw.wa.gov/fishing/shellfish/beaches/MapArea/14/

http://wdfw.wa.gov/fishing/shellfish/beaches/2015WDFWBeachSeasonsBarChart.pdf
"Smoked carp taste just as good as smoked salmon, when you ain't got no salmon"

Rancid Crabtree

Offline Buckmark

  • Washington For Wildlife
  • Trade Count: (+15)
  • Old Salt
  • ******
  • Join Date: Oct 2008
  • Posts: 5443
  • Location: GPS is searching
Re: hardshell clamming
« Reply #3 on: April 15, 2015, 11:48:03 AM »
Dosewallips st park, easy drive from bonney lake, and you can get oysters also.. 
To hunt and butcher an animal is to recognize that meat is not some abstract form of protein that springs into existence tightly wrapped in cellophane and styrofoam.

Offline WSU

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Mar 2009
  • Posts: 5493
Re: hardshell clamming
« Reply #4 on: April 15, 2015, 12:05:36 PM »
Look at WDFW's website and the list of beaches.  I've found the information to be very useful.  You should be able to find something a lot closer than Willapa.

Offline Fastass350

  • Past Sponsor
  • Trade Count: (+11)
  • Sourdough
  • *****
  • Join Date: Mar 2010
  • Posts: 2088
  • Location: Salmon, ID
Re: hardshell clamming
« Reply #5 on: April 15, 2015, 12:17:23 PM »
Yep, Nemah is my favorite spot too. PM me I can lead you to the spot I go. Little bit of a brushy rd that I go so don't take anything too fancy  ;)

Offline highmuley

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Sep 2010
  • Posts: 615
  • Location: Republic
Re: hardshell clamming
« Reply #6 on: April 15, 2015, 09:22:43 PM »
Thank you all for the info...its right along the lines of my thoughts.... Thank you again for the input....I sincerely appreciate it.. 
Its the goin'.....Not the gettin'

Offline bearhunter99

  • Business Sponsor
  • Trade Count: (+35)
  • Frontiersman
  • *****
  • Join Date: Apr 2009
  • Posts: 3147
  • Location: Monitor
Re: hardshell clamming
« Reply #7 on: April 01, 2025, 09:22:12 PM »
Resurrecting a dead thread - sorry but I couldn’t find any other threads. 

Family is staying in Long Beach this week and have done great on Razors but would like to get some steamers too….   Never have clammed for hard shell clams and it looks like there are beaches open currently on the other side of Willapa Bay but we have no idea what we are doing or what equipment we need….  Any input would be greatly appreciated!  Thanks. 


Sent from my iPhone using Tapatalk
RIP Colockumelk   :salute:

"We sleep soundly in our beds because rough men stand ready in the night to visit violence on those who would do us harm." – Winston Churchill



Genesis 27:3
Now therefore take, I pray thee, thy weapons, thy quiver and thy bow, and go out to the field, and take me some venison

Offline CastleRocker

  • Trade Count: (+6)
  • Sourdough
  • *****
  • Join Date: Dec 2008
  • Posts: 1014
  • Location: Castle Rock, WA
Re: hardshell clamming
« Reply #8 on: April 02, 2025, 06:21:36 AM »
Look at WDFW's website and the list of beaches.  I've found the information to be very useful.  You should be able to find something a lot closer than Willapa.

Sounds like the same road we go down.  My kids named it "The Angry Road" when they were little.  Like you said; don't take a nice rig down it. 
Work to live, don't live to work.

You can educate away ignorance, sober up drunkenness, but you can't fix stupid.

Offline pd

  • Trade Count: (+7)
  • Frontiersman
  • *****
  • Join Date: Nov 2012
  • Posts: 2523
  • Location: Seattle?
Re: hardshell clamming
« Reply #9 on: April 02, 2025, 10:57:21 AM »
Wow.  Ten years since the last post.  This forum is a gold mine!

Good luck.  Razors are also available right now.
Si vis pacem, para bellum

Offline bearhunter99

  • Business Sponsor
  • Trade Count: (+35)
  • Frontiersman
  • *****
  • Join Date: Apr 2009
  • Posts: 3147
  • Location: Monitor
Re: hardshell clamming
« Reply #10 on: April 02, 2025, 01:40:57 PM »
Yeah, we got five limits yesterday another 5 today.  Headed out tomorrow for razors again.  Just saw something about steamers and that Willapa was open.  Looked around on this site and this was the only thread I could find but the links above are dead. Just trying to find something else for the family to do.
RIP Colockumelk   :salute:

"We sleep soundly in our beds because rough men stand ready in the night to visit violence on those who would do us harm." – Winston Churchill



Genesis 27:3
Now therefore take, I pray thee, thy weapons, thy quiver and thy bow, and go out to the field, and take me some venison

Offline metlhead

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Feb 2014
  • Posts: 1650
  • Location: sw wa
Re: hardshell clamming
« Reply #11 on: April 02, 2025, 02:20:21 PM »
Hawkes Pt. east of Tokeland is very easy for steamers. No need for a rake. About a hundred yards out we just shuffle around barefoot. Easy to feel em. Takes 15min. Daughter figrd that out years ago while I was sweating the rake.

 


* Advertisement

* Recent Topics

Please Report Problems & Bugs Here by Dan-o
[Today at 11:03:20 PM]


Heard of the blacktail coach? by TitusFord
[Today at 08:38:40 AM]


Fawn dropped by nwwanderer
[Today at 07:36:33 AM]


WDFW's new ship by Tbar
[Today at 07:07:35 AM]


Cougar Problems Toroda Creek Road Near Bodie by Elkaholic daWg
[Today at 06:10:59 AM]


Resetting dash warning lights by Happy Gilmore
[Yesterday at 09:14:51 PM]


Wolf documentary PBS by Roslyn Rambler
[Yesterday at 07:56:34 PM]


New York deer by MADMAX
[Yesterday at 07:38:44 PM]


Halibut fishing by hiway_99
[Yesterday at 05:48:13 PM]


Unknown Suppressors - Whisper Pickle by Sneaky
[Yesterday at 04:41:08 PM]


KIFARU packs on sale by BigJs Outdoor Store
[Yesterday at 02:30:41 PM]


DIY Ucluelet trip by Happy Gilmore
[Yesterday at 08:48:54 AM]


Alaska Fishing Guide and Lodge Recommendations by CaNINE
[Yesterday at 04:14:32 AM]


Anybody breeding meat rabbit? by jackelope
[May 29, 2025, 10:02:50 PM]


Survey in ? by metlhead
[May 29, 2025, 09:35:57 PM]


Colorado Results by cem3434
[May 29, 2025, 08:35:51 PM]


NEED ADVICE: LATE after JUNE 15th IDAHO BEAR by Sliverslinger
[May 29, 2025, 08:31:23 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal