collapse

Advertisement


Author Topic: Who else has a hot rod project? lets see em!  (Read 9113 times)

Offline J.Brower

  • Political Topics
  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Dec 2016
  • Posts: 260
  • Location: Snohomish
Re: Who else has a hot rod project? lets see em!
« Reply #120 on: July 12, 2019, 10:12:25 PM »
Well, got some fluids changed and battery charged, she fired up and ran like a top first try! As luck would have it a buddy bought a storage unit full of big block parts (and a GTO) so I have a hookup on all the little things it needs mechanically. Good start to the project!


Sent from my iPhone using Tapatalk

Awesome news! What would you ultimately like to do with the car? 

I've had one in storage for 10 years that I raced a little when I was younger. Its the only car I've gotten pulled over in just because the officers wanted to talk cars.

Not quite sure what the end goal is for it yet. It is a perfect example of a survivor car so we might do all the mechanical stuff, clean up the interior a bit and clear coat it as is for now. It definitely got a lot of attention at the little show at DQ tonight with many comments about the condition for an unrestored car. Kind of leaning towards that and saving up for a nice paint/body job in a handful of years. Mostly I want it to be 100% reliable, with no mechanical issues(dreaming I know) that we can just jump in and go. Slowly but surely it will get there!

Wife was like a kid on Christmas when I came around the corner this morning as she had no clue I was bringing her home today. A couple of tears shed and away we went up to Deception Pass with our annual anniversary stop at the Shrimp Shack for some fish and chips. Carb needs attention first and foremost, as well as an HEI setup to get rid of the points system. It only died on us once due to a stuck needle in the carb and Iím guessing unhappy distributor. Sheís running a little rich and a little out of time but all in all a successful trip!


Sent from my iPhone using Tapatalk

Online pup0025

  • Trade Count: (0)
  • Pilgrim
  • *
  • Join Date: Aug 2018
  • Posts: 42
  • Location: Yacolt
Re: Who else has a hot rod project? lets see em!
« Reply #121 on: July 16, 2019, 09:54:36 PM »
Not a hotrod, but have been working on a crummy.  I love j's Camaro.

Offline RugerRay

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Sep 2016
  • Posts: 124
  • Location: Spokane
Re: Who else has a hot rod project? lets see em!
« Reply #122 on: July 17, 2019, 06:46:08 AM »
Thanks everyone. I really appreciate it.

Offline RugerRay

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Sep 2016
  • Posts: 124
  • Location: Spokane
Re: Who else has a hot rod project? lets see em!
« Reply #123 on: July 17, 2019, 08:15:32 AM »
Not a hotrod, but have been working on a crummy.  I love j's Camaro.


That's a sweet ride!

Offline DRobnsn

  • Non-Hunting Topics
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Jan 2009
  • Posts: 809
  • Location: wetside
Re: Who else has a hot rod project? lets see em!
« Reply #124 on: July 17, 2019, 10:18:15 AM »
Not a hotrod, but have been working on a crummy.  I love j's Camaro.

Fun for everyone! Nice work!

Offline hambone

  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Sep 2007
  • Posts: 581
  • Location: spokane valley
Re: Who else has a hot rod project? lets see em!
« Reply #125 on: July 18, 2019, 12:59:13 PM »
All the rides look great always wanted to do hot rod work just didn't have the knowledge give me a a aircraft air frame no problem did all kind of work on them in my military life

Offline HUNT

  • Site Sponsor
  • Washington For Wildlife
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Jun 2009
  • Posts: 1132
  • Location: Packard
Re: Who else has a hot rod project? lets see em!
« Reply #126 on: July 18, 2019, 01:31:30 PM »
Bought from my step dad 2 years ago.  His best friend of 41 years.  Started the restoration this past winter.   Hope to have paint by fall. 
Rack'd Up Outdoors

Offline Fl0und3rz

  • Political Topics
  • Trade Count: (+7)
  • Legend
  • ******
  • Join Date: Oct 2010
  • Posts: 32051
  • Location: E. WA
Re: Who else has a hot rod project? lets see em!
« Reply #127 on: July 18, 2019, 10:01:53 PM »
Very nice!  I love those old vettes.

All the rides look great always wanted to do hot rod work just didn't have the knowledge give me a a aircraft air frame no problem did all kind of work on them in my military life

Wrenching is wrenching.  Get to work.  Or get to youtube.  Check out mustie1.  That dude fixes anything from small engines to full vehicles.

Online Alchase

  • Trade Count: (0)
  • Explorer
  • ******
  • Join Date: Apr 2007
  • Posts: 13604
  • Location: Tinker AFB, OK
Re: Who else has a hot rod project? lets see em!
« Reply #128 on: July 19, 2019, 06:18:23 AM »
Bought from my step dad 2 years ago.  His best friend of 41 years.  Started the restoration this past winter.   Hope to have paint by fall. 

Noticing the hood, which motor?
Beautiful car!
Only 2 defining forces sacrificed themselves for you:
The American Soldier and Jesus Christ. One died for your freedom, the other for your soul.

My rock,
He trains my hands for war and my fingers for battle.
Psalm 144.1

Offline DRobnsn

  • Non-Hunting Topics
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Jan 2009
  • Posts: 809
  • Location: wetside
Re: Who else has a hot rod project? lets see em!
« Reply #129 on: July 19, 2019, 10:12:57 AM »
Very nice!  I love those old vettes.

All the rides look great always wanted to do hot rod work just didn't have the knowledge give me a a aircraft air frame no problem did all kind of work on them in my military life

Wrenching is wrenching.  Get to work.  Or get to youtube.  Check out mustie1.  That dude fixes anything from small engines to full vehicles.

Agreed, its all nuts and bolts. Aircraft can be hot rods too! Spendy though  :chuckle:

Offline HUNT

  • Site Sponsor
  • Washington For Wildlife
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Jun 2009
  • Posts: 1132
  • Location: Packard
Re: Who else has a hot rod project? lets see em!
« Reply #130 on: July 19, 2019, 10:21:09 AM »
Bought from my step dad 2 years ago.  His best friend of 41 years.  Started the restoration this past winter.   Hope to have paint by fall. 

Noticing the hood, which motor?
Beautiful car!

Has a 307 in it right now.  My dad had a guy rebuild the engine for him a long time ago and the 327 that was in it disappeared.  Didn't  figure it out until a water pump went out and he went to replace it.  Oh well.

The car was totaled at one point in time.  The guy my dad bought it from rebuilt it.  There was nothing from the firewall forward at that time.  The guy did a good job as most everything appears to be from a 67.   

I plan to drop a 427 in it right before the paint.

Rack'd Up Outdoors

Offline Woodchuck

  • GO TEAM!!!
  • Global Moderator
  • Trade Count: (+8)
  • Explorer
  • *****
  • Join Date: Mar 2009
  • Posts: 10989
  • Location: Walla Walla
  • HuntWA Woodblock
Re: Who else has a hot rod project? lets see em!
« Reply #131 on: July 19, 2019, 10:25:15 AM »
If ever there was a car begging for a 408 stroker LS swap... :tup:
Antlered rabbit tastes like chicken


Inuendo, wasn't he an Italian proctoligist?

Online Rainier10

  • Global Moderator
  • Trade Count: (+3)
  • Old Salt
  • *****
  • Join Date: Dec 2010
  • Posts: 8828
  • Location: Over the edge
Re: Who else has a hot rod project? lets see em!
« Reply #132 on: July 19, 2019, 11:02:26 AM »
Here's a factory 427 4 speed car that my dad did about 10 years ago.  Fun car to drive but hot as heck with that big block.
Pain is temporary, achieving the goal is worth it.

I didn't say it would be easy, I said it would be worth it.

Every father should remember that one day his children will follow his example instead of his advice.


The views and opinions expressed in this post are those of the author and do not necessarily reflect the official policy or position of HuntWa or the site owner.

Offline HUNT

  • Site Sponsor
  • Washington For Wildlife
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Jun 2009
  • Posts: 1132
  • Location: Packard
Re: Who else has a hot rod project? lets see em!
« Reply #133 on: July 19, 2019, 05:24:48 PM »
Here's a factory 427 4 speed car that my dad did about 10 years ago.  Fun car to drive but hot as heck with that big block.

Beautiful car!  66?
Rack'd Up Outdoors

Online Alchase

  • Trade Count: (0)
  • Explorer
  • ******
  • Join Date: Apr 2007
  • Posts: 13604
  • Location: Tinker AFB, OK
Re: Who else has a hot rod project? lets see em!
« Reply #134 on: July 19, 2019, 06:20:13 PM »
I thought that hood was a big block option?

Ranier10, Beautiful car!
Only 2 defining forces sacrificed themselves for you:
The American Soldier and Jesus Christ. One died for your freedom, the other for your soul.

My rock,
He trains my hands for war and my fingers for battle.
Psalm 144.1

 


* Advertisement

* Recent Topics

2019 Elk Harvest Post Here!!! by Mfowl
[Today at 09:23:20 PM]


Best 4 or 5 seat side by side by bornhunter
[Today at 09:22:18 PM]


FS fire pit by kisfish
[Today at 09:19:40 PM]


2019 COHO REPORT by h20hunter
[Today at 09:17:43 PM]


Game hide, Guide wear by Soundbite
[Today at 09:17:24 PM]


Big horn sheep opening day success by bearhunter99
[Today at 09:15:10 PM]


Wet year up High by ganghis
[Today at 09:11:47 PM]


Where is Peaches Ridge? Asking for a friend... by rosscrazyelk
[Today at 09:08:44 PM]


The Search for a Factory Production Magnum Rifle by jasnt
[Today at 08:55:35 PM]


taxidermy supplies by h2ofowlr
[Today at 08:42:34 PM]


Carbon Stabilizers by J.Brower
[Today at 08:41:36 PM]


Montana Alternate Deer List results are up by sagerat
[Today at 08:38:34 PM]


Peet Dryer for hydration bladder by J.Brower
[Today at 08:37:38 PM]


Couple of bags of brass by J.Brower
[Today at 08:34:56 PM]


E-bikes by actionshooter
[Today at 08:34:54 PM]


Jasonís 338-375 Ruger Build by Dan-o
[Today at 08:26:45 PM]


UMAi Bags (Dry Aging) by Stein
[Today at 08:03:46 PM]


WTS WTT Remington 700 ADL varmint .223 mossy oak by wrchinook
[Today at 07:57:27 PM]


reach goes to one fish by Stein
[Today at 07:53:19 PM]


Town deer by deerhunter_98520
[Today at 07:41:08 PM]