collapse

Advertisement


Author Topic: Arrow rest  (Read 3013 times)

Offline AWS

  • Trade Count: (+2)
  • Sourdough
  • *****
  • Join Date: Dec 2007
  • Posts: 1839
Arrow rest
« on: May 15, 2017, 03:05:27 PM »
I bought a fishing bow, Cajun fish stick 45# revurve and just shooting it into the ground off my deck it seems very accurate well put together combo.  One thing the arrow rest is just a V-shaped roller and it is difficult to keep the arrow on the roller and is a fairly long reach to keep my finger hooked over it.  Is there another type of arrow rest that would keep the arrow in place and work with fishing arrows?

Thanks AWS
After the first shot the rest are just noise.

Make mine a Minaska

Offline Special T

  • Truth the new Hate Speech.
  • Washington For Wildlife
  • Trade Count: (+13)
  • Legend
  • ******
  • Join Date: Aug 2009
  • Posts: 20850
  • Location: Skagit Valley
  • Make it Rain!
    • Silver Arrow Bowmen
    • Silver Arrow Bowmen
Re: Arrow rest
« Reply #1 on: May 15, 2017, 04:49:00 PM »
My brother in law uses a fall away rest and likes it. Think it's a rip cord. I Think whisker biscuit makes a big diameter  insert. I just use a standard rest and don't have too many problems.

Sent from my SAMSUNG-SM-G930A using Tapatalk

In archery we have something like the way of the superior man. When the archer misses the center of the target, he turns round and seeks for the cause of his failure in himself. 

Confucius

Offline Old Dog

  • Political Topics
  • Trade Count: (+2)
  • Sourdough
  • *****
  • Join Date: Jan 2009
  • Posts: 1136
  • Location: Pierce County
Re: Arrow rest
« Reply #2 on: May 15, 2017, 08:57:26 PM »
Nothing wrong with the rest.  You are probably pinching the arrow nock.  Try using just the pad of your fingers, and either gap your fingers a little, or shoot all three fingers under the nock.  Three fingers under puts the arrow closer to the eye, and can make sighting down the arrow a little easier as well. 

Remember to allow for refraction, and aim low.   :tup:
Hunt hard and shoot straight!

Offline AWS

  • Trade Count: (+2)
  • Sourdough
  • *****
  • Join Date: Dec 2007
  • Posts: 1839
Re: Arrow rest
« Reply #3 on: May 15, 2017, 09:35:27 PM »
The problem isn't while drawing the bow it is just using it, the bow has to be kept almost completely vertical and not moved quickly or the arrow will bounce off the rest.

We used to have a little spring loaded arrow holder taped to the grip that would hold the arrow on the rest and drop away when you drew the arrow but I haven't seen one of those anywhere.

After the first shot the rest are just noise.

Make mine a Minaska

Offline Old Dog

  • Political Topics
  • Trade Count: (+2)
  • Sourdough
  • *****
  • Join Date: Jan 2009
  • Posts: 1136
  • Location: Pierce County
Re: Arrow rest
« Reply #4 on: May 15, 2017, 09:40:00 PM »
 :sry: Oops!  I misunderstood the problem.  I just shoot off the shelf, and eliminate the rest altogether.   :tup:
Hunt hard and shoot straight!

Offline Old Dog

  • Political Topics
  • Trade Count: (+2)
  • Sourdough
  • *****
  • Join Date: Jan 2009
  • Posts: 1136
  • Location: Pierce County
Re: Arrow rest
« Reply #5 on: May 15, 2017, 09:42:05 PM »
Doesn't look like an option with that bow.   :dunno:
Hunt hard and shoot straight!

Offline AWS

  • Trade Count: (+2)
  • Sourdough
  • *****
  • Join Date: Dec 2007
  • Posts: 1839
Re: Arrow rest
« Reply #6 on: May 15, 2017, 10:01:53 PM »
I found a brush rest that I think I can fit to the bow.   It is open topped so the slide stop should go right on through and it it doesn't bolt right on I'm pretty handi at making a bracket to adapt it.
After the first shot the rest are just noise.

Make mine a Minaska

Offline birdshooter1189

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Nov 2013
  • Posts: 106
  • Location: Port Orchard
Re: Arrow rest
« Reply #7 on: May 16, 2017, 06:18:59 AM »
I have an AMS Wave rest on my compound for bowfishing.  It holds the arrows very securely and I don't have issues with arrows bouncing off.  I usually stretch my index finger over the top of the arrow to hold it while I am walking around looking for fish. I do most of my bowfishing from the bank.  My brother has the newer AMS Tidal Wave rest on his compound bow for bowfishing.  The roller part is the same, but it has a piece that goes over the top that keeps arrows from falling off the rest if you bounce it or hold it upside down etc, so you don't have to have a finger over the rest to hold the arrow on. 

If it is a fairly long reach to get your finger over the arrow, that may be an issue with where the arrow rest is on the bow with respect to the hand grip more than an issue with the arrow rest.  With the AMS arrow rests, I think you can adjust the rest down, but unless you adjust where the arrow clips to the string on the back, only adjusting the rest will make your arrows point down on the bow.  May mess with the timing.   

My recommendation is to go with the AMS Tidal Wave rest so you don't need a finger over the arrow to hold it in place while you are moving about looking for fish, and keep it inline with where the current arrow rest is.

Offline Ice_man

  • Trade Count: (0)
  • Pilgrim
  • *
  • Join Date: Feb 2014
  • Posts: 30
  • Location: Auburn WA
  • Student at CWU
Re: Arrow rest
« Reply #8 on: May 16, 2017, 08:00:05 AM »


My recommendation is to go with the AMS Tidal Wave rest so you don't need a finger over the arrow to hold it in place while you are moving about looking for fish, and keep it inline with where the current arrow rest is.

I have this same rest and love it and have had no problems with it

Offline AWS

  • Trade Count: (+2)
  • Sourdough
  • *****
  • Join Date: Dec 2007
  • Posts: 1839
Re: Arrow rest
« Reply #9 on: May 16, 2017, 08:29:41 AM »
Thanks for the heads up on the Tidal Wave, it looks like it might just do the trick.

Thanks AWS
After the first shot the rest are just noise.

Make mine a Minaska

Offline Jerry malbeck

  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Dec 2009
  • Posts: 443
  • Location: east side
Re: Arrow rest
« Reply #10 on: May 16, 2017, 10:01:46 PM »
Quick draw is the best
Love many
Trust few
Wrong None

Offline AWS

  • Trade Count: (+2)
  • Sourdough
  • *****
  • Join Date: Dec 2007
  • Posts: 1839
Re: Arrow rest
« Reply #11 on: May 19, 2017, 01:44:53 PM »
The Tidal Wave arrived yesterday and I installed it today, perfect fit no need to jury-rig anything.

Thanks

AWS
After the first shot the rest are just noise.

Make mine a Minaska

Offline birdshooter1189

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Nov 2013
  • Posts: 106
  • Location: Port Orchard
Re: Arrow rest
« Reply #12 on: May 19, 2017, 02:07:19 PM »
Nice!  You're welcome.

 


* Advertisement

* Recent Topics

Know someone that wants to get away from crowds? Learn how to be self-sufficient by Cap.Silver
[Today at 12:19:44 AM]


Turkey season shut down chances. by lokidog
[Today at 12:19:22 AM]


Sticky AR bolt.... by lokidog
[Today at 12:11:17 AM]


Mounting Scope - who uses a level? by TooTallMike
[Today at 12:04:38 AM]


Feds: Gun stores are essential by Mulie87
[Yesterday at 11:56:06 PM]


Impact of state shutdown on upcoming hunting season by huntnphool
[Yesterday at 11:41:44 PM]


SICK ELK by bbarnes
[Yesterday at 11:32:58 PM]


Run What You Brung by TheStovePipeKid
[Yesterday at 11:31:53 PM]


Hoyt Carbon Element Compound Bow by Lucky1
[Yesterday at 11:03:32 PM]


Wtt wts 1970 Winchester model 70 .270 Winchester with leupold vx2 2x7x33 by wrchinook
[Yesterday at 11:02:43 PM]


Sell: kuiu packs by Logan80
[Yesterday at 10:36:53 PM]


In truck bed storage storage systems, anyone have one? by b23
[Yesterday at 10:31:21 PM]


"I'm Essential" T-shirts $10 shipped by Dan-o
[Yesterday at 10:18:49 PM]


Alliant powders in stock at Grafs by BigGoonTuna
[Yesterday at 10:14:14 PM]


Swavorski for $500 on amazon by Pnwrider
[Yesterday at 10:00:35 PM]


Who's aftermarket trigger do y'all recommend for a Glock G17? by Dan-o
[Yesterday at 09:48:39 PM]


Pudelpointer breeders? by jagermiester
[Yesterday at 09:40:23 PM]


WOLVES AND CORONAVIRUS: What are the facts? by jackelope
[Yesterday at 09:37:11 PM]


How do you display your Euro mounts? by 7mmfan
[Yesterday at 09:15:27 PM]


Last day for multi-season permit applications by cem3434
[Yesterday at 09:06:16 PM]