collapse

Advertisement


Author Topic: Glass bedding question  (Read 2240 times)

Offline tbrady

  • Political & Covid-19 Topics
  • Trade Count: (+1)
  • Scout
  • ****
  • Join Date: Sep 2009
  • Posts: 455
  • Location: Carnation, WA
Glass bedding question
« on: January 21, 2018, 05:16:41 PM »
Hi All-

I did my first bedding job this weekend and have a question about whether the barrel should be touching the bedding at all.  I bedded a Sako A7 with a Bell and Carlson stock (aluminum block) using devcon.

There is an area just forward of the recoil lug where about 1/2" of the barrel formed an impression in the epoxy.  Before the bedding job the barrel was completely free floating, all the way to the action.

So... is this ok or should I grind this part out?  I've looked at dozens of pictures/videos online and I have seen a lot with the same barrel impression but also several where it looks like they cut it out.

Any thoughts much appreciated!

tim

Offline Magnum_Willys

  • Political & Covid-19 Topics
  • Trade Count: (+1)
  • Old Salt
  • ******
  • Join Date: Nov 2009
  • Posts: 5437
Re: Glass bedding question
« Reply #1 on: January 21, 2018, 06:09:27 PM »
I like to see an inch or so past the recoil lug - under the barrel -
 bedded for a sporter contour.  Yours sounds fine. 

Offline Biggerhammer

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Jun 2011
  • Posts: 5142
  • Location: Central Washington
  • Powder, primer, bullet JUNKIE.
Re: Glass bedding question
« Reply #2 on: January 21, 2018, 06:57:12 PM »
I like to see an inch or so past the recoil lug - under the barrel -
 bedded for a sporter contour.  Yours sounds fine.

Yep. 👍👍👍👍👍

Offline tbrady

  • Political & Covid-19 Topics
  • Trade Count: (+1)
  • Scout
  • ****
  • Join Date: Sep 2009
  • Posts: 455
  • Location: Carnation, WA
Re: Glass bedding question
« Reply #3 on: January 21, 2018, 07:03:27 PM »
Thx guys!!

Offline j_h_nimrod

  • Non-Hunting Topics
  • Trade Count: (+1)
  • Sourdough
  • *****
  • Join Date: Aug 2011
  • Posts: 1597
  • Location: Humptulips, WA
Re: Glass bedding question
« Reply #4 on: January 21, 2018, 07:11:57 PM »
I usually bed up about 3” on the barrel on most of my rifles, creating a stable, solid mounting platform is your goal and the most stable point of the barrel mated to the action reduces strain on mounting screws and reduces torque and strain on the rest of the system.  I have played both sides n heard pros n cons and this has always worked well. My opinion.

Offline Okanagan

  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Nov 2010
  • Posts: 665
Re: Glass bedding question
« Reply #5 on: January 21, 2018, 07:53:43 PM »
Shoot it to see what it does.

Depending on the barrel length, I aim to bed the first 2 ½ to 2 ¾ inches and free float the rest.  3 inches used to be favored, and lately more shooters I know are free floating full length.  I trim off unevenly extruded bedding compound to eyeball symmetrical, hoping for symmetrical support/contact under the bedded section of barrel. 

There may be better ways.  :dunno: My home grown bedding has improved all but one of a half dozen rifles and that one shot the same, not worse.  Two improved dramatically.  Shoot a group with it before finessing the bedding to see if you have lucked into a sweet spot for accuracy.

 
« Last Edit: January 22, 2018, 06:11:10 AM by Okanagan »

Offline b23

  • Non-Hunting Topics
  • Trade Count: (+7)
  • Frontiersman
  • *****
  • Join Date: Jan 2010
  • Posts: 3171
  • Location: Spokane Wa.
Re: Glass bedding question
« Reply #6 on: January 21, 2018, 08:33:13 PM »
For me, I don't ever want anything touching the barrel.

Online mountainman

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Mar 2007
  • Posts: 4923
  • Location: Wenatchee, Wa
Re: Glass bedding question
« Reply #7 on: January 21, 2018, 09:04:13 PM »
Shoot it to see what it does.

Depending on the barrel length, I aim to bed the first 2 ½ to 2 ¾ inches and free float the rest.  3 inches used to be favored, and lately more shooters I know are free floating full length.  I trim off unevenly extruded bedding compound to eyeball symmetrical, hoping for symmetrical support/contact under the bedded section of barrel. 

There may be better ways.  :dunno: My home grown bedding has improved all but one of a half dozen rifles and that one shot the same, not worse.  Two improved dramatically.  Shoot a group with it before finessing the bedding it to see if you have lucked into a sweet spot for accuracy.

 
Shoot it and look for improvement. You can always dremel it out later if needed.  I've seen improvement both ways..
That Sword is more important than the Shield!

Offline Biggerhammer

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Jun 2011
  • Posts: 5142
  • Location: Central Washington
  • Powder, primer, bullet JUNKIE.
Re: Glass bedding question
« Reply #8 on: January 21, 2018, 11:15:16 PM »
A proper no stress bedding job will always improve accuracy. I bed the tang and the lug. Make sure the rear of the lug is bedded and the front of the lug is free. You will be good to go.👍

 


* Advertisement

* Recent Topics

Springer 2024 Columbia River by Taco280AI
[Today at 03:45:23 PM]


Springer Fishing Opportunity 3/29 & 3/30 by Blacklab
[Today at 12:48:56 PM]


Long Beach Clamming Tides by dilleytech
[Today at 12:39:19 PM]


Let’s see your best Washington buck by abhold87
[Today at 12:03:27 PM]


Bearpaw Season - Spring 2024 by bearpaw
[Today at 11:45:41 AM]


Walked a cougar down by Rainier10
[Today at 11:17:49 AM]


SB 5444 signed by Inslee on 03/26 Takes Effect on 06/06/24 by hughjorgan
[Today at 09:03:26 AM]


Average by lhrbull
[Today at 07:31:56 AM]


CVA optima V2 LR tapped hole for front sight by Remdawg
[Today at 07:09:22 AM]

SimplePortal 2.3.7 © 2008-2024, SimplePortal