collapse

Advertisement


Author Topic: 2019 Boat Restoration: Outboard 22 May 2019  (Read 2756 times)

Offline BDildine

  • Non-Hunting Topics
  • Trade Count: (+2)
  • Scout
  • ****
  • Join Date: Aug 2016
  • Posts: 297
  • Location: Tacoma
    • https://www.facebook.com/brian.dildine
  • Groups: TSC, Rainier Antique Tractor Club, NRA Life
Re: 2019 Boat Restoration: Outboard 22 May 2019
« Reply #45 on: May 22, 2019, 12:03:55 PM »
my boat dont leave the driveway until the plug is in and tight
"Space for Lease" inquire within

Offline Crunchy

  • Political Topics
  • Trade Count: (+1)
  • Frontiersman
  • *****
  • Join Date: Apr 2007
  • Posts: 3964
  • Location: Puyallup
Re: 2019 Boat Restoration: Outboard 22 May 2019
« Reply #46 on: May 22, 2019, 12:55:19 PM »
Its a mistake you make only once.  Left mine out before.  Tied up to the dock.  Parked my truck and came back to 2 inches of water on the rear deck.  Grabbed plug and pushed it in real quick.  Bilge pump took care of the rest.  Took 10 minutes to pump all the water out.

Offline BIGMIKE

  • Hunter that likes to fish
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Apr 2010
  • Posts: 539
  • Location: Fife
Re: 2019 Boat Restoration: Outboard 22 May 2019
« Reply #47 on: May 22, 2019, 01:21:22 PM »
New to me Outboard. :tup: Now I need a cherry picker...😆
Happy Hunting and Fishing

Offline blackpowderhunter

  • Non-Hunting Topics
  • Trade Count: (+5)
  • Longhunter
  • *****
  • Join Date: Apr 2014
  • Posts: 656
  • Location: Renton
Re: 2019 Boat Restoration: Outboard 22 May 2019
« Reply #48 on: May 22, 2019, 08:41:52 PM »
New to me Outboard. :tup: Now I need a cherry picker...😆
got a buddy with one in maple valley if you need to borrow one  :tup:

Offline blackpowderhunter

  • Non-Hunting Topics
  • Trade Count: (+5)
  • Longhunter
  • *****
  • Join Date: Apr 2014
  • Posts: 656
  • Location: Renton
Re: 2019 Boat Restoration: Outboard 22 May 2019
« Reply #49 on: May 22, 2019, 08:43:23 PM »
Its a mistake you make only once.  Left mine out before.  Tied up to the dock.  Parked my truck and came back to 2 inches of water on the rear deck.  Grabbed plug and pushed it in real quick.  Bilge pump took care of the rest.  Took 10 minutes to pump all the water out.
yup...once after rebuilding the carb we took it down to dunk it in the lake and check some stuff.  slide it off the trailer, park the truck, look in the cup holder...............drain plug.
ran down and jumped in the water to stop the bleeding and put it back on the trailer to drain.
i don't like to tell the story, but my wife sure does.  :chuckle:

Offline Crunchy

  • Political Topics
  • Trade Count: (+1)
  • Frontiersman
  • *****
  • Join Date: Apr 2007
  • Posts: 3964
  • Location: Puyallup
Re: 2019 Boat Restoration: Outboard 22 May 2019
« Reply #50 on: May 22, 2019, 08:46:46 PM »
I was  lucky.  I can reach mine from inside the boat.  Arm just gets a little wet.

Offline Stein

  • Trade Count: (+1)
  • Old Salt
  • ******
  • Join Date: Sep 2013
  • Posts: 5153
Re: 2019 Boat Restoration: Outboard 22 May 2019
« Reply #51 on: May 22, 2019, 09:52:39 PM »
There are two kinds of boaters.....


Sent from my iPhone using Tapatalk

Offline snarkybull

  • Non-Hunting Topics
  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Jul 2012
  • Posts: 188
  • Location: coast
Re: 2019 Boat Restoration: Outboard 22 May 2019
« Reply #52 on: May 23, 2019, 05:25:58 PM »
hahaha I love forgot the plug stories.  I rebuilt the transom on my fiberglass boat last year.  I put in two garboard plugs....one on each side where they meet in the middle.  Theoretically, if I ever forget it I can do it from the inside, cause I sure as heck can't reach it on the outside.
How long til elk season?!??

Offline BIGMIKE

  • Hunter that likes to fish
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Apr 2010
  • Posts: 539
  • Location: Fife
Re: 2019 Boat Restoration: Outboard 22 May 2019
« Reply #53 on: May 23, 2019, 10:12:26 PM »
I was wondering if there suppose to be a hose attachef to here? Finally got a wood stand built, acquired a cherry picker and i want to make sure that outboard is 100% before mounting it on the boat.
Happy Hunting and Fishing

Offline Crunchy

  • Political Topics
  • Trade Count: (+1)
  • Frontiersman
  • *****
  • Join Date: Apr 2007
  • Posts: 3964
  • Location: Puyallup
Re: 2019 Boat Restoration: Outboard 22 May 2019
« Reply #54 on: May 23, 2019, 10:24:10 PM »
Hard to tell from that picture but should be able to find out here if you know the specs on the motor.

https://www.boats.net/catalog/yamaha/outboard-by-year/2006-and-later/115hp

 


* Advertisement