collapse

Advertisement


Author Topic: Plastic jacket for knight bighorn breech  (Read 3290 times)

Offline Natas5150

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Mar 2011
  • Posts: 99
Plastic jacket for knight bighorn breech
« on: September 22, 2020, 09:20:31 AM »
So i currently own a knight bighorn .50. It is currently setup for no. 11 musket caps. Next year as its to close to season opener I would like to switch to 209 ignition. I'm not sure i understand if I need to use the plastic jacket for the 209 primer or can I put the primer on the  nipple bare? I'm just wondering if I can avoid the jacket.  The knight website has the breech plug for 209 but doesn't really say if you go bare unless im missing it.

Thanks for the help.

Offline Sabotloader

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Apr 2011
  • Posts: 2309
  • Location: Idaho, Northern
Re: Plastic jacket for knight bighorn breech
« Reply #1 on: September 22, 2020, 09:38:36 AM »
So i currently own a knight bighorn .50. It is currently setup for no. 11 musket caps. Next year as its to close to season opener I would like to switch to 209 ignition. I'm not sure i understand if I need to use the plastic jacket for the 209 primer or can I put the primer on the  nipple bare? I'm just wondering if I can avoid the jacket.  The knight website has the breech plug for 209 but doesn't really say if you go bare unless im missing it.

Thanks for the help.

You do haver to change your breech plug to a FPJ Breech Plug.  Knight use to offer a bare 209 primer breech plug, but because of liabilities associated with shooting bare primer in a gun designed with a percussion hammer they will not sell them any longer.  You might also need to purchase a different hammer unless your current hammer has 209 on the face of the hammer.

Another thought, I really can't tell if you are shooting a #11 cap or a mucket cap from your note.  But if you are shooting Musket caps I would really suggest you switch to a #11 Magnum cap shooting T7.   Musket caps on the market today are all switching back to "re-enactment caps" they are not as hot as the older hunting musket caps.

Keep shooting muzzleloaders - They are a blast!!

Offline usmc74

  • Non-Hunting Topics
  • Trade Count: (+2)
  • Sourdough
  • *****
  • Join Date: Mar 2009
  • Posts: 1378
  • Location: North Bend
  • Groups: NRA (Life), RMEF, SAF (Life), American Legion (Life), Master Hunter
Re: Plastic jacket for knight bighorn breech
« Reply #2 on: September 22, 2020, 09:42:49 AM »
There have been problems (?) with the plunger guns using the bare primer setup.  I think it was sending primer debris out of the breach.  Not a good thing only a few inches from your face.

Offline Sabotloader

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Apr 2011
  • Posts: 2309
  • Location: Idaho, Northern
Re: Plastic jacket for knight bighorn breech
« Reply #3 on: September 22, 2020, 11:09:52 AM »
There have been problems (?) with the plunger guns using the bare primer setup.  I think it was sending primer debris out of the breach.  Not a good thing only a few inches from your face.

Yes - that is was the problem!
Keep shooting muzzleloaders - They are a blast!!

Offline callturner

  • Political & Covid-19 Topics
  • Trade Count: (+2)
  • Longhunter
  • *****
  • Join Date: Jun 2020
  • Posts: 757
  • Location: nine mile falls Washington
    • n/a
  • Groups: nra
Re: Plastic jacket for knight bighorn breech
« Reply #4 on: September 22, 2020, 12:04:53 PM »
I shoot full sized musket caps in mine, not #11's. Works fine but I use the RWS caps(musket). I have both the red holders for the 209s ant the breech plug for them and the magnetic breech plug for 209s but have never used them.

Offline Sabotloader

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Apr 2011
  • Posts: 2309
  • Location: Idaho, Northern
Re: Plastic jacket for knight bighorn breech
« Reply #5 on: September 22, 2020, 01:39:01 PM »
I can not longer find RWS Musket caps online anymore.  The 1081's that are now offered are for Re-enactment..

The Musket caps you have are listed a 1081 FL without the top hat design.  The new ones are listed as 1081 and are the top het variety.

Keep shooting muzzleloaders - They are a blast!!

Offline callturner

  • Political & Covid-19 Topics
  • Trade Count: (+2)
  • Longhunter
  • *****
  • Join Date: Jun 2020
  • Posts: 757
  • Location: nine mile falls Washington
    • n/a
  • Groups: nra

Offline callturner

  • Political & Covid-19 Topics
  • Trade Count: (+2)
  • Longhunter
  • *****
  • Join Date: Jun 2020
  • Posts: 757
  • Location: nine mile falls Washington
    • n/a
  • Groups: nra
Re: Plastic jacket for knight bighorn breech
« Reply #7 on: September 22, 2020, 04:54:15 PM »
These RWS are plenty hot. The cci caps are for re enactment .

Offline callturner

  • Political & Covid-19 Topics
  • Trade Count: (+2)
  • Longhunter
  • *****
  • Join Date: Jun 2020
  • Posts: 757
  • Location: nine mile falls Washington
    • n/a
  • Groups: nra
Re: Plastic jacket for knight bighorn breech
« Reply #8 on: September 22, 2020, 04:59:25 PM »
My biggest problem was the crud ring with the T7. I understand the primer was too hot. I switched to Pyrodex select and cured the problem. I just liked the larger musket caps cause I have fat fingers and end up using them on occasion to recap the gun.

Offline Sabotloader

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Apr 2011
  • Posts: 2309
  • Location: Idaho, Northern
Re: Plastic jacket for knight bighorn breech
« Reply #9 on: September 22, 2020, 05:23:57 PM »
https://powderinc.com/product/rws-musket-caps/

Good deal I couldn't find any the other day when I was looking... Looks like the minimum order there is  1000 caps though.

Keep shooting muzzleloaders - They are a blast!!

Offline callturner

  • Political & Covid-19 Topics
  • Trade Count: (+2)
  • Longhunter
  • *****
  • Join Date: Jun 2020
  • Posts: 757
  • Location: nine mile falls Washington
    • n/a
  • Groups: nra
Re: Plastic jacket for knight bighorn breech
« Reply #10 on: September 22, 2020, 09:30:54 PM »
Its really not that bad though. The price includes hasmat. Maybe split with someone.

 


* Advertisement

* Recent Topics

Yard bucks by Boss .300 winmag
[Yesterday at 11:20:39 PM]


Yard babies by Feathernfurr
[Yesterday at 10:04:54 PM]


Pocket Carry by bb76
[Yesterday at 08:44:00 PM]


Seeking recommendations on a new scope by coachg
[Yesterday at 08:10:21 PM]


Sauk Unit Youth Elk Tips by high_hunter
[Yesterday at 08:06:05 PM]


Jupiter Mountain Rayonier Permit- 621 Bull Tag by HntnFsh
[Yesterday at 07:58:22 PM]


KODIAK06 2025 trail cam and personal pics thread by Boss .300 winmag
[Yesterday at 07:07:33 PM]


MOVED: Seekins Element 7PRC for sale by Bob33
[Yesterday at 06:57:10 PM]


3 pintails by metlhead
[Yesterday at 04:44:03 PM]


1993 Merc issues getting up on plane by Happy Gilmore
[Yesterday at 04:37:55 PM]


A lonely Job... by AL WORRELLS KID
[Yesterday at 03:21:14 PM]


Unit 364 Archery Tag by buglebuster
[Yesterday at 12:16:59 PM]


In the background by zwickeyman
[Yesterday at 12:10:13 PM]


A. Cole Lockback in AEB-L and Micarta by A. Cole
[Yesterday at 09:15:34 AM]


Willapa Hills 1 Bear by hunter399
[Yesterday at 08:24:48 AM]


Bearpaw Outfitters Annual July 4th Hunt Sale by Threewolves
[Yesterday at 06:35:57 AM]


Sockeye Numbers by Southpole
[July 03, 2025, 09:02:04 PM]


Selkirk bull moose. by moose40
[July 03, 2025, 05:42:19 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal