collapse

Advertisement


Author Topic: DIY turret press  (Read 6115 times)

Offline Bareback

  • Political & Covid-19 Topics
  • Trade Count: (+7)
  • Longhunter
  • *****
  • Join Date: Aug 2020
  • Posts: 503
  • Location: Whidbey Island
DIY turret press
« on: February 26, 2021, 09:59:41 AM »
As we all know everything gun associated stuff is out of stock, backordered or just not available. I’ve had a turret press on backorder for over four months. I’m beginning to seriously doubt it will be here in the next few months. So..... I said screw it and will just make my own. I took measurements from my Hornady single stage, went online to find a style I would prefer, sat down with some measuring instruments, and started designing on CAD. I sifted through all the materials I’ve been hoarding for the last 25+ years and found some 7075 aluminum billet, some 4140 pre-hard, and my daughter unknowingly volunteered some spare bearings from her old roller blades.

I’m at the infancy stage of the project now. So, if any of the reloading gurus have any features or suggestions that may be beneficial to the design lets hear them. I’ll post pictures throughout the machining process.


Offline TommyH

  • Political & Covid-19 Topics
  • Trade Count: (+3)
  • Sourdough
  • *****
  • Join Date: Oct 2011
  • Posts: 2025
  • Location: Eastside
Re: DIY turret press
« Reply #1 on: February 26, 2021, 10:31:06 AM »
Following along.

Offline mtnwkr

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Nov 2015
  • Posts: 62
  • Location: Port Orchard, Wa
Re: DIY turret press
« Reply #2 on: February 26, 2021, 10:56:15 AM »

Offline Bareback

  • Political & Covid-19 Topics
  • Trade Count: (+7)
  • Longhunter
  • *****
  • Join Date: Aug 2020
  • Posts: 503
  • Location: Whidbey Island
Re: DIY turret press
« Reply #3 on: February 26, 2021, 03:04:23 PM »
The Lee looks to be out of stock on that link.

Manage to get the arms done today. Hopefully next week I can get some more machine time.


Offline Bareback

  • Political & Covid-19 Topics
  • Trade Count: (+7)
  • Longhunter
  • *****
  • Join Date: Aug 2020
  • Posts: 503
  • Location: Whidbey Island
Re: DIY turret press
« Reply #4 on: March 05, 2021, 04:02:03 PM »
Found some machine time at the end of the day. Managed to get half the turret done. Dialed the material in to .0002” wanting to keep perpendicularity and parallelism within .0005" for the whole project.

Off to chase chrome next week. Hopefully I can nock another chunk out of the project third week of March.

Offline storyteller

  • Forum Sponsor
  • Trade Count: (+11)
  • Hunter
  • *****
  • Join Date: Jun 2014
  • Posts: 228
  • Location: Marysville
  • Groups: NRA, DU
Re: DIY turret press
« Reply #5 on: March 05, 2021, 05:27:32 PM »
Nice work.   

Offline Magnum_Willys

  • Political & Covid-19 Topics
  • Trade Count: (+1)
  • Old Salt
  • ******
  • Join Date: Nov 2009
  • Posts: 5437
Re: DIY turret press
« Reply #6 on: March 05, 2021, 06:22:36 PM »
purdy !!!! :tup:

Offline carpsniperg2

  • Site Sponsor
  • Global Moderator
  • Trade Count: (+126)
  • Legend
  • *****
  • Join Date: Sep 2009
  • Posts: 31430
  • Location: Goldendale,WA
Re: DIY turret press
« Reply #7 on: March 05, 2021, 06:57:56 PM »
Way cool  :tup:
Owner: SPLIT DIAMOND TACTICAL
Firearms/Transfers/Parts/Optics
2011 HW Head Competition Winner

Offline deerhunter_98520

  • Past Sponsor
  • Trade Count: (+4)
  • Old Salt
  • *****
  • Join Date: Nov 2009
  • Posts: 8928
  • Location: aberdeen, wa
  • Chief Executive Head Anarchist of YKWTSASFFRO
Re: DIY turret press
« Reply #8 on: March 05, 2021, 09:17:46 PM »
Very awesome  :tup:
Official hunt-wa bigfoot field researcher!

Offline NRA4LIFE

  • Site Sponsor
  • Past Sponsor
  • Trade Count: (+10)
  • Old Salt
  • *****
  • Join Date: Nov 2007
  • Posts: 6057
  • Location: Maple Valley
  • Groups: NRA
Re: DIY turret press
« Reply #9 on: March 05, 2021, 09:30:34 PM »
I am following big time. These projects are fascinating to me. Is this your own machine you're using?
Look man, some times you just gotta roll the dice

Offline Bushcraft

  • Non-Hunting Topics
  • Trade Count: (+3)
  • Sourdough
  • *****
  • Join Date: Aug 2008
  • Posts: 1120
  • Location: Olympic Peninsula
  • Groups: NRA, SCI, NSSF, RMEF, RMGA, MDF, WSF, DU, HHC, WWC, WDAC
Re: DIY turret press
« Reply #10 on: March 10, 2021, 10:43:54 AM »
Someone is building their own Area 419 Zero. ;)

Nice!
Socialism is the philosophy of failure, the creed of ignorance, and the gospel of envy; its inherent virtue is the equal sharing of misery. - Winston Churchill

Work hard. Hunt hard. Lift other hunters up.

*Proud supporter of NRA, NRA-ILA SCI, SCIF, SCI-PAC, NSSF, RMEF, RMGA, MDF, WSF, DU, WWA, HHC, WWC

Offline highside74

  • Political & Covid-19 Topics
  • Trade Count: (+11)
  • Frontiersman
  • *****
  • Join Date: Oct 2009
  • Posts: 4484
  • Location: Eatonville wa
Re: DIY turret press
« Reply #11 on: March 10, 2021, 10:58:17 AM »
I'm am always so impressed with the talents of people on this forum. Very cool man.

Offline Bareback

  • Political & Covid-19 Topics
  • Trade Count: (+7)
  • Longhunter
  • *****
  • Join Date: Aug 2020
  • Posts: 503
  • Location: Whidbey Island
Re: DIY turret press
« Reply #12 on: March 12, 2021, 04:14:28 PM »
NRA4LIFE ........  It just happens to be my machine.

Bushcraft ...... I think I may call this one Area 51 😉

Finished the turret today. Next week on to the easy stuff, hopefully.

Offline jasnt

  • ELR junkie
  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Old Salt
  • ******
  • Join Date: Feb 2010
  • Posts: 6445
  • Location: deer park
  • Out shooting
  • Groups: WSTA
Re: DIY turret press
« Reply #13 on: March 12, 2021, 04:59:11 PM »
Tagging along.  Looks great
https://www.howlforwildlife.org/take_action  It takes 10 seconds and it’s free. To easy to make an excuse not to make your voice heard!!!!!!

The commission shall attempt to maximize the public recreational game fishing and hunting opportunities of all citizens, including juvenile, disabled, and senior citizens.
https://apps.leg.wa.gov/RCW/default.aspx?cite=77.04.012

Offline carpsniperg2

  • Site Sponsor
  • Global Moderator
  • Trade Count: (+126)
  • Legend
  • *****
  • Join Date: Sep 2009
  • Posts: 31430
  • Location: Goldendale,WA
Re: DIY turret press
« Reply #14 on: March 12, 2021, 05:32:43 PM »
Looks like awesome work!!!
Owner: SPLIT DIAMOND TACTICAL
Firearms/Transfers/Parts/Optics
2011 HW Head Competition Winner

 


* Advertisement

SimplePortal 2.3.7 © 2008-2024, SimplePortal