collapse

Advertisement


Author Topic: Is Anyone Loading Their Own 10MM??  (Read 2701 times)

Offline actionshooter

  • Past Sponsor
  • Trade Count: (+2)
  • Old Salt
  • *****
  • Join Date: Apr 2007
  • Posts: 5384
  • Location: Olympia
    • https://www.instagram.com/steve.bell.actionshooter/
Re: Is Anyone Loading Their Own 10MM??
« Reply #15 on: August 14, 2021, 10:21:07 AM »
I like the 200gr bullet from Montana Bullet Works over Alliant 2400. I've shot this combo in a few different 10mm pistols with good results. Start at 9.5gr and work up until the gun tells you to stop. I'm at 1275fps with 11.5gr of 2400 in a 5" Kimber with a 22# variable weight recoil spring, 28# hammer spring, and a flat-bottom firing pin stop. I don't know if I'd go that high in a Glock or other stock pistol though.

https://www.montanabulletworks.com/product/10mm-noe-200gr-wfn-pb/

I am looking at those... probably will be the way I go but have you ever tried the 220s? I have not been able to figure out who is making them.
Rainier Arms Shooting Team
Rainier Arms, Fortis Manufacturing, Timney Triggers
Vortex Optics, Viking Tactics, Sporting Systems Vancouver

Offline yorketransport

  • Business Sponsor
  • Trade Count: (+10)
  • Frontiersman
  • *****
  • Join Date: Apr 2009
  • Posts: 3300
  • Location: Yelm
  • I'm sorry, it's my fault I'll try harder next time
    • https://www.facebook.com/scapegoatenterprises/
    • Scapegoat Enterprises
Re: Is Anyone Loading Their Own 10MM??
« Reply #16 on: August 15, 2021, 04:26:24 PM »
I played with the Cast Performance 220gr in both of my 10’s and wasn’t happy with them. They never penetrated in a straight line, always veering off course a couple inches into whatever I was shooting. The 220s are ridiculously long and I don’t think most guns are properly stabilizing them. I think I have a couple hundred of the 220 on my shelf if you want to try some.

For comparison, these are unfired and recovered bullets shot into 20% gel blocks. That’s a 200gr from Montana Bullet Works, a 152gr bullet I had Hammer make for me, the Cast Performance 220gr and a 180gr XTP.
Scapegoat Enterprises Custom Shirts and Decals

Offline actionshooter

  • Past Sponsor
  • Trade Count: (+2)
  • Old Salt
  • *****
  • Join Date: Apr 2007
  • Posts: 5384
  • Location: Olympia
    • https://www.instagram.com/steve.bell.actionshooter/
Re: Is Anyone Loading Their Own 10MM??
« Reply #17 on: September 21, 2021, 09:28:22 PM »
OK, starting the load testing and am going to use Longshot (only powder I could find), 200gr Montana Hardcast, Starline Brass and winchester primers.... Has anyone used the Longshot for a similar load?   I'll post results soon.
BTW.... this will be in a G20
Rainier Arms Shooting Team
Rainier Arms, Fortis Manufacturing, Timney Triggers
Vortex Optics, Viking Tactics, Sporting Systems Vancouver

Offline dreadi

  • Business Sponsor
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Aug 2016
  • Posts: 540
  • Location: Tacoma
    • http://www.facebook.com/blackhammerarms
    • Black Hammer Arms
Re: Is Anyone Loading Their Own 10MM??
« Reply #18 on: December 15, 2021, 10:05:02 PM »
BLACK HAMMER ARMS
Buy A Suppressor http://www.silencershop.com/blackhammerarms
1911 Pistolsmithing
Firearm Refinishing
GLOCK Certified Armorer
CMMG Authorized Dealer
NEMO Arms Authorized Dealer
http://www.blackhammerarms.com
http://www.facebook.com/blackhammerarms
https://www.instagram.com/blackhammerarms/

Offline duckmen1

  • Non-Hunting & Covid-19 Topics
  • Trade Count: (+3)
  • Sourdough
  • *****
  • Join Date: Jun 2009
  • Posts: 2017
  • Location: outdoors
Re: Is Anyone Loading Their Own 10MM??
« Reply #19 on: December 15, 2021, 10:59:23 PM »
If any 10mm brass is needed feel free to pm me and I will get you some details on what I have for a bit more reasonable price then you will find it for elsewhere. I have a fair amount.
Maturity is when you have the power to destroy someone who did you wrong but instead you breathe, walk away, and let life take care of them.

 


* Advertisement

* Recent Topics

WTB: Ascend 10 Sit In Kayak by Platensek-po
[Today at 02:42:57 PM]


2022 Ford Lightning Discussion by lamrith
[Today at 02:36:55 PM]


Uberti rolling block 357 magnum pistol price drop by BigVinn
[Today at 02:29:56 PM]


Gearmatic winch by Bob33
[Today at 02:27:22 PM]


Help me mount my cannon downriggers… by Boot
[Today at 02:24:46 PM]


Breeds for upland by MeepDog
[Today at 02:05:27 PM]


WTB: XD-M 10mm 4.5” by bskredsvig
[Today at 01:45:17 PM]


Question on synthetic velevt by BLDtraLR
[Today at 01:40:07 PM]


WTB: Rare Bourbons by Stalker
[Today at 01:32:47 PM]


Is spring bear back on?! by idahohuntr
[Today at 01:22:32 PM]


WTB .410 ammo 2.5” by clayslayer85
[Today at 01:15:38 PM]


Calling Cougars? by rainshadow1
[Today at 12:39:08 PM]


FS: FNX Tactical .45 FDE by maximus
[Today at 12:34:28 PM]


WTT 1# Varget by Skillet
[Today at 12:25:43 PM]


Dickinson Bristol diesel stove by Skillet
[Today at 12:24:51 PM]


FREE - Weber Genesis Grill - Samsung TV by Angry Perch
[Today at 12:16:33 PM]


5' Equipment ramps and engine stand, Lincoln welder, and more by Skillet
[Today at 11:52:49 AM]


Woke gone Wild at WDFW by KFhunter
[Today at 11:38:54 AM]


Does Nosler make bullets for reloading. by hunter399
[Today at 11:29:28 AM]


Coleman 212cc by Ridgeratt
[Today at 11:11:35 AM]

SimplePortal 2.3.7 © 2008-2022, SimplePortal